3D Printer MK2B PCB Heated Bed 200x200mm, Borosilicate Glass, Hardware, Wiring, Thermistor Kit for Prusa i3 or other RepRap

Speed up your reprap heated bed assembly – get all necessary parts in one kit. You will need 2-4 paper binder clips to hold glass in place, best source for these clips – ebay.com or your local office supply store.

MK2B Heated Bed Specs:

Dimensions: 214mm x 214mm
Hole Spacing: 209mm
Laminate FR4 1.6mm
2 Layer, 35µm Copper
Red Soldermask – Both Side
White Silkscreen – Both Side
Power Input: 12V/24V DC
Copper Plated Holes

Borosilicate Glass Specs:

Dimensions: 213mm x 200mm
Thickness: 3mm

NTC 3950 Thermistor Specs:

Thermistor temperature value table for Marlin
Small Size: 1.25mmx2.0mm glass bead
High accuracy: 1%
Resistance value at 25°C=100K
Wiring insulation: high temperature teflon/PTFE
Wiring length: 1 meter

Package contents:

1 x MK2B PCB Heated Bed
1 x Borosilicate Glass Print Surface 200x213mm
1 x NTC 3950 Wired Thermistor (wiring is 1 meter long)
1 x Power wiring (2 wires, 1 meter long each)
4 x M3x05 x 25 Stainless socket head screws
4 x M3x05 Steel Locknuts
8 x M3x9 Steel Washers
1 x Silicone Rubber Spacer, about 50mm long.

Product Features

  • Compatible with most RepRap 3d printers
  • Popular, dual 12V / 24V power MK2B design
  • All necessary for MK2B mounting small bits are included
  • Wiring and pre-thermistor are included
  • Use binder clips to hold glass plate on the MK2B

Visit The Website For More Information…

Published by

3D Print Anything

3D Printing. The next Goldrush is on it´s way. Inside information on how to start printing in 3D, where to buy Printers, how to use them, and the newest Pictures and reviews of available 3D Printers.

3 thoughts on “3D Printer MK2B PCB Heated Bed 200x200mm, Borosilicate Glass, Hardware, Wiring, Thermistor Kit for Prusa i3 or other RepRap”

Leave a Reply