Anycubic Ultrabase 3D Printer Platform with Aluminum 12V/24V Dual Power MK3 Heatbed, Tempered Glass Plate, Durable Build Surface for Prusa i3 220x220mm

Note:
* Suggested bed temperature may vary depends on the filament material;
* Please properly level the bed before printing;
* Never let the nozzle rub against the Ultrabase directly, it will demage the nozzle or lead to clogging;
* Clean the platform surface with alcohol/water.

Temperature settings for different filaments:
1. PLA:50-70℃
2. Flexible filament: 50-70℃
3. ABS:100-125℃ ( 110℃ is recommended )
4. PC:100-130℃ ( 120℃ is recommended )
5. Nelon:90-120℃ ( 110℃ is recommended )
6. PP:100-130℃ ( 120℃ is recommended )
7. PETG: 50-70℃

Usage of Ultrabase Heatbed Kits:
Please kindly visit :
Official Web: www.anycubic3d.com
Youtube Channel: www.youtube.com/watch?v=zDup0gp9pLA

Specification:
Material: Tempered glass/Inorganic coating/Aluminum
Heatbed Power:140-145w
Voltage:12V/24V
Max Temperature:120 Degree Celsius 
Resistance around 0.9 ohm for 12V 
Resistance around 3.6 ohm for 24V
Item size: Tempered Glass 220x220x4mm ;Aluminum Heatbed 220x220x1.5mm
Thickness:approx. 5.5mm
Item weight:750g
Package Weight :870g

Package List:
1x ANYCUBIC Ultrabase 3D Printer Platform with Heatbed
4x M3X35 Screws
4x M3 nuts
4x Spacers

Product Features

  • Excellent adhesion: Ultrabase covered by microporous coating, shows strong adhesion in printing. Easy to take off models by hand or with a little help from the scrapper for very large models.
  • Good Flatness: Ultrabase is glass-based and the critical tolerance is ±0.2mm. (normally within the 0.1mm range).
  • High Durability: The special coating is inorganic and has a hardness of 8 Mohs, and it is capable to work at 400℃.
  • Easy to clean: Ultrabase is easy to clean by alcohol/water.
  • Compatibility: Ultrabase is compatible with most Cartesian style 3D printers (Build surface size :220x220mm)

Click Here For More Information

Published by

3D Print Anything

3D Printing. The next Goldrush is on it´s way. Inside information on how to start printing in 3D, where to buy Printers, how to use them, and the newest Pictures and reviews of available 3D Printers.

3 thoughts on “Anycubic Ultrabase 3D Printer Platform with Aluminum 12V/24V Dual Power MK3 Heatbed, Tempered Glass Plate, Durable Build Surface for Prusa i3 220x220mm”

  1. GREAT PRINTER BED!!!!! I don’t typically write reviews, but this deserves one. The quick summary is, after a few days of use and about a dozen prints, it’s pretty fantastic.Pros:1. Once heated, initial layers stick very well. Like permanent bond well.2. Once cooled prints come off pretty much with the flick of a finger.3. Leaves a nice smooth bottom layer.Cons:(these are minor IMO)1. It seems you must heat the bed for adhesion, even for PLA2. It doesn’t come…

  2. TL:DR – Worth the price for your prints – don’t leave the nuts on the pegs – needs instructions/does not include any.So, now that that is out of the way for those that just want the short and simple, let’s get into the good stuff.I started off with, let’s call it “V1” printer, where the thick aluminum bed was covered with a buildtak sheet on it. This thing was great to start with! I had little adhesion problems other than OVER-adhesion. Due to the over-adhesion, my buildtak ripped…

Leave a Reply