The high-voltage module uses the principle Tesla coil is made of high-voltage pulse output voltage current- small size- high efficiency- simple external circuit(just plug in the switch- the battery can be) discharge intensity violent.
Input voltage: DC 3.6V – 6V
Output voltage: DC 400KV – 600KV(Please note that when security)
High type: pulse current
High voltage bipolar discharge distance: 10mm – 20mm
Output voltage lines length: about 100mm
Input power cable length: about 10mm (red is positive)
Dimensions : Φ24 x 63mm
3.7V Li-ion battery can be used single or two series- such as 18650- idle cell phone batteries ( to remove the protection board – the proposed capacity of 2000mAh or more ) or NiCd / NiMH battery pack- 4V or 6V lead acid batteries.
This module is a small production with high-pressure science inverter transformer / booster finished module- the input terminal DC 3V – 7.2V can get 20KV DC high voltage (about 1-2 cm arc) at the output can be used as high school science experiments – electronic equipment- negative ion generator- high voltage source to use when making small science.
Avoid high-pressure high-voltage module load electricity use. Must adjust the high voltage side suitable distance (before electricity- battery voltage and capacity is proportional to the distance from high-voltage arcing used when testing the arc distance from short to long experiment- prohibited from beyond the arc when powered up- the energy can not be released due to high pressure- easily damage the module)
Due to power- the internal heat is not easy- every power-on time should be controlled within a minute.
Determine whether the battery capacity can be driven
- The high-voltage module uses the principle Tesla coil is made of high-voltage pulse output voltage current, small size, high efficiency, simple external circuit(just plug in the switch, the battery can be) discharge intensity violent.