Kweiny Heat Insulation Cotton and PTFE High Temp Tape for 3D Printer Makerbot Hotend Heater Block | 10PCS Cotton and A Roll of Tape for Extruder Parts Tool Kit

Notice:
1. After replace the nozzle, Please recalibrate the distance between nozzle and build plate to ensure the quality of print parts;
2. Please do not use flame to test their heat resistance, because the flame’s temperature is much higher than 300 degrees Celsius (572 Fahrenheit ).

Size:
Heat insulation cotton: Length 80mm/3.15in, width 20mm/0.78in, thickness 2mm;
PTFE high temp tape: Total length 10m/32.8ft, width 8mm, thickness 0.13mm

package including:
10PCS heat insulation cotton;
One Roll of PTFE High Temp Tape

Product Features

  • Compatibility: Matches all 3D print extruder heater block offered from E3D Makerbot, MK8 Makerbot RepRap , etc.
  • High temperature resistance: Both PTFE tape and heat insulation cotton, short term resistance to temperature 260 degrees Celsius (500 Fahrenheit ), long term resistance to temperature 300 degrees Celsius (572 Fahrenheit )
  • Function: Keep heater block temperature constant, so that improving the quality of the printed matter, save electricity and prolong the service life of heater and temp sensor
  • Use-method: You can cut cotton into the right size and hole according to your needs, then stick it firmly with PTFE tape. 5 sides of heater can be wrapped up in cotton, except the surface installed heater wire, but you just need to use 1 piece cotton. You can also use PTFE tape to stick any other parts on your 3D printer
  • Material: The heating insulation cotton is made from heat resistant ceramic fiber, the tape is made from PTFE

Visit The Website For More Information…

Iverntech Nema 17 Stepper Motor Bipolar 1.5A 400mN.m 2 Phase 4 Wires 1.8 Deg for 3D Printer or CNC Machine

Specification:

Motor Type: Bipolar Stepper

Rated Voltage: 3.3V DC

Rated Current: 1.5A

Phase Resistance:2.2ohms ± 10% (20 C)

Step Angle: 1.8 deg.

Phase Inductance: 3.8mH ± 20%(1kHz 1V rms)

Number of Leads: 4

Item Size: 42.5×42.5x63mm

Item Weight: 280g

Packing List:

1x Nema 17 Stepper Motor

1x 50cm Motor Wire

Product Features

  • 2 Phase 4 Wires Nema 17 Stepper Motor, with 50cm motor wire
  • Size: 42.5 * 42.5 * 63mm
  • 40Ncm/57.1oz.in holding torque
  • Current 1.5A. Voltage: 3.3V Dc
  • Widely used in Kossel and Pruse 3D printers and CNC parts

Visit The Website For More Information…

Sproud Custom Mural Wallpaper Modern Color Abstract Art Wall Painting Living Room Cafe Bar Ktv Mural Wallpaper Decor Papel De Parede 3D 150cmX105cm

Warm Tips:
-Antimicrobial Product Protection works to inhibit bacterial odors, stains and mold and mildew growth
-Can be scrubbed using a damp cotton cloth and moderate pressure
-Wallpaper you will receive may have some wrinkles on it or both ends, but it do not effect looking after gluing on the wall
Notice:
As the shooting light and monitor settings,maybe the color is a little different between the photo and real item.hope you can understand

Product Features

  • Wallpaper: Our Unique Wallpapers Are Easy To Install And Can Change Your Room In A Blink Of An Eye. Easy Sticking, Without Soaking – No Overlapping Parts! Important: Wallpaper Without Structure.
  • Colors: Our full HD quality wallpapers guarantee lively colors, details and contrasts. All silk cloth wallpapers are organic and safe thanks to our high quality printer. No bends, no wrinkles, no bubbles, free of odor – is also suitable for a child’s room and the bedroom!
  • Ideal As Living Room Wallpaper, Dining Room Wallpaper, Bedroom Wallpaper, Or For A Feature Wall!
  • No Matter What Size Do You Order, You Will Receive The Whole Pattern, Proportionally Sized!
  • Size: If You Do Not Fit Your Size, We Can Customize It For You

Visit The Website For More Information…

Big Plastic Pulley Wheel with Bearing Idler Pulley Gear Perlin Wheel for 3D Printer Creality CR-10/CR-10S/CR-10 S4/CR-10 S5 (Pack of 5)

UCHOOSE, a King Professional 3D printer and Printing Parts Store.
For High Quality & Good Service, We are diligent to Do Our Best!

These are original replacement parts /accessories for Creality 3D Printer CR-10 /CR-10S /CR-10 S4 /CR-10 S5.
Outer Diameter: 23.89mm
Inner Diameter: 5mm
Hight: 10.23mm
Net Weight: 14g/pcs
Color: Black
Package Included:
5PCS Plastic wheels with Bearings

For more original Creality 3D parts /accessories, please visit “UCHOOSE “Amazon Store. Thanks!

Product Features

  • Original replacement parts /accessories for Creality 3D Printer CR-10 /CR-10S /CR-10 S4 /CR-10 S5
  • Deep Groove Ball Bearings
  • Easy Installation & Replacement
  • With high precision and low noise
  • Pack of 5PCS Wheel For CR-10 /CR-10S 3D Printer

Visit The Website For More Information…

Wangdd22 15pc/set 1.75mm Teflon Throat Tube+0.4mm Extruder Nozzle Print Heads+Heater Blocks Hotend for MK8 Makerbot Anet A8 3D Printer

Descriptions:
Specification of Brass Nozzle:
Type:0.4mm Extruder Brass Nozzle Print Head
Color:Golden.
Material:Brass
Size:5*13mm
Input Diameter:1.75mm
Output Diameter:0.4mm

Specification of Extruder Tube:
Type:Nozzle Throat
Compatibility:3D Printer
Outer Thread:M6
Nozzle Throat Outer Diameter:7mm
Nozzle Throat Inner Diameter:4mm
Length:30mm
Filament Diameter:1.75mm
Material:Stainless Steel

Specification of Heater Blocks Hotend:
Name:Metal Part
Color:Silver
Specification:20*20*10mm

Package list:
15 piece/set ( 1.75mm Teflon Throat Tubex5pcs,nozzle 0.4mmx5pcs,Heater Blocks Heating Hotendx5pcs)

Product Features

  • Pack of 5 x 3D Printer Extruder Hotend 30mm Length 1.75mm Nozzle Inputting Tube( for MK8 Makerbot Reprap Prusa I3 3D Printer) and 5 x 3D Printer 0.4mm Extruder Brass Nozzle Print Head.
  • Nozzle Throat: Outer Thread – M6; Inner Diameter – 2mm; Length – 30mm; Filament Diameter – 1.75mm; Material – Stainless Steel.
  • 0.4mm Extruder Brass Nozzle Print Head: Color – Golden; Material – copper (brass); Size – 5*13mm; Input Diameter: 1.75mm; Output Diameter: 0.4mm.
  • Compatibility: compatible with all 1.75mm PLA ABS 3D Printer
  • Quanlity:15pcs/lot (5 piece 1.75mm Nozzle Inputting Tube,5 piece 3D Printer 0.4mm Extruder Brass Nozzle Print Head,5 piece Heater Blocks Hotend)

Visit The Website For More Information…