10 Meters 2GT-6 Open Ended PU Timing Belt Width 6mm For RepRap 3D Printer CNC White Steel Core Accessory

Description:

This timing belt is a non-slipping mechanical drive belt. It is made as a flexible belt with and steel core. Reinforce cord ensure the running capability in the driving. It runs over matching toothed pulleys or sprockets, made of rubber and perfect for 3D printers.

Specifications:

Type: 2GT-6,open end

Material: PU, steel
Color: White

Length: 10M / 39.37″

Width: 6mm / 0.23″

Pitch: 2mm / 0.08″

Weight: 127g(approx.)

Package Includes:

1 x Timing Belt

Note:
1. Please allow 1-3cm error due to manual measurement. Thanks for your understanding.
2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

Product Features

  • Made of PU material and steel core, very flexible and strong
  • Compared with 2GT black belt with glass fiber core, strong steel core wires are joined in this white belt
  • Excellent process and durable, Strong abrasion resistance
  • Low noise, high wear resistance, small production tolerances
  • Suitable for small precision machinery transmission, such as 3D printers, intelligent plotter, etc

Detailed Information available on our Homepage…

Elegoo 5 sets 28BYJ-48 ULN2003 5V Stepper Motor + ULN2003 Driver Board for Arduino

Elegoo Inc. is a professional manufacturer and exporter that is concerned with the design, development production and marketing of arduino, 3d printers, raspberry pi and STM32.
Our Dream is to make the best price and best quality produce for customers.
So we would like to receive your valuable suggestions for our products and we can improve them for you.

Features:
– A, B, C, D four-phase LED indicates the status of the stepper motor work.
– Stepper motor with a standard interface, when used directly pluggable.
– 5 line 4 phase can be used for ordinary ULN2003 chip driver, connect to the 2 phase , support the development board,With convenient use, direct docking
– Rated Voltage: DC5V 4-phase
– Insulation Resistance: >10MΩ (500V)
– Dielectric Strength: 600V AC / 1mA / 1s
– Step angle: 5.625 x 1/64
– DC Resistance: 200Ω±7% (25C)
– Reduction ratio: 1/64
– Insulation Grade: A
– No-load Pull in Frequency: >600Hz
– No-load Pull out Frequency: >1000Hz
– Pull in Torque: >34.3mN.m(120Hz)
– Detent Torque: >34.3mN.m
– Temperature Rise: 《40K(120Hz)

Package including:
5 set Uln2003 Stepper Motor + Driver Board
10pcs female to male cable ( as a gift)

Product Features

  • Stepper motor with a standard interface, when used directly pluggable.
  • A, B, C, D four-phase LED indicates the status of the stepper motor work.
  • 5 line 4 phase can be used for ordinary ULN2003 chip driver, connect to the 2 phase , support the development board,With convenient use, direct docking
  • Drive Module Board Size(in): 1.37*1.18*0.6 ; Stepper Motor diameter: 1.06(in) ; Stepper Motor lines: 9.45(in)
  • Great packing in a box : 5 set Uln2003 Stepper Motor + Driver Board (with a little gift)

Detailed Information available on our Homepage…

BIQU GT2 16Teeth 3mm Bore Aluminum Timing Belt Idler Pulley for 3D Printer 6mm Width Timing Belt (Pack of 5pcs)

Specifications:
Number of tooth: 16T
Bore Diameter: 5mm
Net Weight: 3g/pcs
Material: Aluminum

Package Included:
5*20T GT2 Timing Belt Pulley

Product Features

  • Use for GT2 6mm Wide Timing Belt
  • Number of tooth: 16T
  • Bore Diameter: 3mm
  • Net Weight: 3g/pcs
  • Widely used in milling machine, gear shaper, drilling machine, CNC engine lathe, hobbing machine or other machinery transmission occasions

Detailed Information available on our Homepage…

3D Printer Kit Clogged E3D J-Head Extruder Nozzle (2each) .6mm .8mm 1.0mm + Tool for 1.75mm filament ABS PLA

J-Head 3D Printer Kit Extruder Nozzle Head Cleaner Bits 1 each (2each) .6mm .8mm 1.0mm + bit holding pin-vise

THE BITS: These Micro-drill bit Extruder Nozzle Cleaners are an essential item for any 3D printer owner. Every extruder nozzle must be cleaned out from time to time. These nozzles are very difficult to clean properly. These micro drill bits are of the highest quality, made in Japan. They are the perfect tool for the job. By using these precision drill bits, you will extend the life of your nozzle and without a doubt, produce finer prints. If you need another size or have any questions, contact us and we will take care of you.

THE TOOL
This multi-functional tool is perfect for hand cleaning the nozzle head to your 3D printer. You can use a drill to do the job, but the hand held tool is more safe. The high speeds of electric drills can cause damage to the nozzle head if the user does not have very steady hands. This tool is very easy to hold and compact at 3.5″ long.

Product Features

  • Will clear nozzles and produce finer prints
  • Shipped in protective plastic case
  • J-Head and Standard Nozzle Print Quality Solution
  • 3.5″ Bit Holding Pin Vise with 3.175mm and 2.0mm chuck
  • More sizes available

Detailed Information available on our Homepage…

Metal money clip with Shoutout to uteruses, the original 3-D Printers

Metal money clip with Shoutout to uteruses, the original 3-D Printers

Product Features

  • Made of 100% durable metal! Size: 3cm x 6cm
  • AMAZING QUALITY High quality stainless steel,no fading, non-deformable, allergy free.
  • BRINGING THE BEST STYLE TO PROFESSIONALS Meticulously designed to help you leave the best impression!
  • LARGE VARIETY You can select your design between thousands of moneyclips, with unique designs and prints! We also have designs available on a wide range of apparel and products such as t-shirts, pillows, mugs, keyrings and many more.
  • A NECESSITY Made of durable material, won’t break off. Stay in budget and keep you budget handy and organized!

Detailed Information available on our Homepage…