GEEETECH 3DPrinter, Wooden Prusa I3 Pro W desktop 3D printer DIY Kit with WIFI Cloud, 200x200x180mm(7.9”7.9”7.1”) Printing Size,Support Wi-Fi Connect, EasyPrint 3D App

Click Here If You Need More Detailed Info…

HICTOP 3D Printer Tools Kit 3D Printing Models Clean Up Kit and Removal Tool

Everything needed to print, maintain and clean up 3d model, and replace some parts of 3d printer.
Your knives always stay sharp with this 13 piece knife kit.
Package includes, 13 sharp blades, 3 handles and convenient storage case.
Great for 3D Print Clean-up & Arts and Crafts, change nozzle and removel models.
This kit has everything to make 3D printing easy and the printed results spectacular.

Package:
13pcs sharp blades
3pcs handles
2pcs removal tool
1pcs nozzle sleeve
1pcs pliers

Product Features

  • Quantity: 17-pcs tools with great quality and one year warranty.
  • Multifunction: all kinds of tools for 3d printing and model.
  • Function: This kit has everything to make 3D printing easy and the printed results spectacular.

Click Here If You Need More Detailed Info…

Redrex 310mm T8x8 Lead Screw Integrated with Nema 17 Stepper Motor 1.5A 40Ncm/57.1 oz.in for Prusa i3 Reprap Corexy DIY 3D Printer kits and CNC Mile Routers

Features:
●High Stability:No shaft coupling needed,integrated with stepper motor and lead screw.
●High torque Nemga 17 stepper motor:It provides 1.5A 40Ncm/57.1 oz.in holding torque
●Easy to plug:100mm stepper lead wire with XH2.54 connector,no soldering or peeling works.
●Motor rotor is covered by magnetic filling materials,which will help to refrain from skipping steps and getting stuck.
●Redrex Support:Any quality problems and support ,please feel free to contact Redrex Team directly.

Electrical Specification:
Manufacturer Part Number: RDX3D060
Motor Type: Bipolar Stepper
Number of Phase: 2
Step Angle: 1.8 deg.
Rate Voltage: 3.3V DC
Holding Torque:1.5A
Phase Resistance: 2.2ohms±10%(20℃)
Phase Inductance: 3.8mH±20%(1KHz)
Rotor inertia:57g.cm²

Physical Specification:
Frame Size: 42 x 42mm
Body Length: 352mm
Lead Screw Lengh:310mm
Number of Leads: 4
Lead Length: 100mm
Item Weight: 500g

Package List:
1x 310mm T8x8 Lead Screw Stepper Motor

Product Features

  • High Stability:No shaft coupling needed,integrated with stepper motor and lead screw.
  • High torque Nemga 17 stepper motor:It provides 1.5A 40Ncm/57.1 oz.in holding torque.
  • Easy to plug:100mm stepper lead wire with XH2.54 connector,no soldering or peeling works.
  • Motor rotor is covered by magnetic filling materials,which will help to refrain from skipping steps and getting stuck.
  • Redrex Support:Any quality problems and support ,please feel free to contact Redrex Team directly.

Click Here If You Need More Detailed Info…

Geeetech Rostock 301 Mix Color FDM 3D Printer DIY Kit 3-in-1-out Triple-color Printer with 0.4mm Nozzle 1.75mm Filament Diameter


Geeetech Rostock 301 provides you with excellent printability and triple-color, mix color capability, offering an intuitive 3D printing experience.It maintains DIY property.
Specifications:

Brand: Geeetech

Model: Rostock 301

Print Technology: FDM

Build Volume: Cylindrical, D: 170mm, H: 230mm

Printing Precision: 0.1mm

Positioning Precision: 0.05mm

Printing Speed: 80-120mm/s

Filament Diameter: 1.75mm

Nozzle Diameter: 0.4mm

Filament Type: PLA

Software:

Operating System: For Windows / for Mac / for Linux

Control Software: Easy Print, Repetier-Host, Printrun, Cura

File Format: .STL, 3ds, obj, amf, dae, G-code

Electrical:

Input: 110V/4.8A

Output: DC12V/20A

Connectivity: USB, SD card (support stand-alone printing)

Mechanical:

Build Platform: Aluminum alloy plate+heatbed

XYZ Rods: Wear-resistant, stainless steel

Stepper Motors: 1.8°step angle with 1/16 micro-stepping

Physical Structure: Delta Rostock

Physical Dimensions & Weight:

Item Size: 32 * 32 * 87cm / 12.6 * 12.6 * 34.3in

Item Weight: 9.6kg / 21.2lb

Package Size: 51 * 41 * 21cm / 20.1 * 16.1 * 8.3in

Package Weight: 11kg / 24.3lb

Package List:

1 * Geetech Rostock 301 3D Printer DIY Kit

1 * Tool Set

1 * 3m Starter Filament

Document:

Geeetech Rostock 301 building instruction.pdf

Geeetech Rostock 301 User Manual.pdf

Geeetech Rostock 301 Package list.pdf

If the above hyperlinks can’t be used, please find them from the official website page–https://www.geeetech.com/geeetech-rostock-301-mix-color-3d-printer-diy-kit-p-1008.html?zenid=upf17m69g7gpg6q2abdrst2vs2

Product Features

  • ★3-in-1-out Mix Color 3D Printing Hotend–A single nozzle hotend for 3D printing in multiple colors that requires a minimum of calibration. It allows you to feed three filaments through three independent feed-in channels and be extruded out through one nozzle which provides a faster, easier and more precise method of 3D printing.
  • ★Hardware Upgrades–We upgrade the GTM32 3d printer controller board so that if features everything you need to build your printer for multi-color printing.It is powered by STM32F103 which uses the Cortex-M3 core, with a maximum CPU speed of 72 MHz. It offers a 32‑bit product range that combines very high performance, real-time capabilities, digital signal processing, and low‑power, low‑voltage operation, while maintaining full integration and ease of development.
  • ★Firmware Upgrades–We added a new Mixer feature to control the percentage of the feed rate of the 3 filaments. It allows you to time exactly when and where the color changes.Working as a palette, the three filaments of different colors will be fed in accordance with a certain percentage of feeding rate, then they will be melted and mixed in the nozzle chamber to generate another new color or mixed color, enables the printing of model with any color.
  • ★Higher Building Speed And Printing Precession–The benifit of a Delta printer is that the moving parts are lightweight so that it’s easier to travel. That results in faster printing with greater accuracy. To ensure the print speed, we have designed the hotend to have the smallest possible weight of 175g; the print speed can be up to 120mm/s.
  • ★ Open Color System–You can also use Rostock 301 as a single extruder printer, a dual extruder and a 2-in-1-out extruder, which gives the printer an open color system; this means you are able to use nearly any color to get precisely the effect you are after. When you combine different colors, the possibilities are endless. With our Mixer feature, you can get blending color, mix color and even full color for one printing project.

Click Here If You Need More Detailed Info…

QLOUNI 620Pcs 2.54mm Pitch JST SM 1 2 3 4 5 6 Pin Housing Connector Dupont Male Female Crimp Pins Adaptor Assortment Kit

QLOUNI 620Pcs 2.54mm Pitch JST Connector

QLOUNI JST SM Pins tool — High Quality Connector
Dupont Crimp Pin Connector is made of durable plastic and metal, tin plating, internal pure copper to increase the conductivity, the surface coating antioxidant, increase the life.

QLOUNI Male / Female Pin — Variety Complete
1x 1 pin Plug Housing x 50 pcs
1x 2 pin Plug Housing x 40 pcs
1x 3 pin Plug Housing x 20 pcs
1x 4 pin Plug Housing x 20 pcs
1x 5 pin Plug Housing x 20 pcs
1x 6 pin Plug Housing x 20 pcs
2x 2 pin Plug Housing x 10 pcs
2x 3 pin Plug Housing x 10 pcs
2x 4 pin Plug Housing x 10 pcs
2x 5 pin Plug Housing x 10 pcs

200PCS Male Pin Crimp Terminal
200PCS Female Pin Crimp Terminal

All kits are in a transparent box for storage and carry

Product Features

  • [Dupont Connectors Kit] 620 pcs male and female JST SM connectors assortment kit by QLOUNI for DIY project
  • [Pin & Pin Pitch] JST SM 1 / 2 / 3 / 4 / 5 / 6 pin terminals, 18-26 AWG wire, Pin Pitch: 2.54mm
  • [Easy to Use] Just put the crimps in the tool and press them, make the crimp the insulation are all the way toward the wire
  • [Use Range] Compatible with Arduino and breadboard style pin connectors and sockets, like 3d printer boards etc.
  • [Delivery] 200 pcs female crimp pins; 200 pcs male crimp pins; 10 pcs 2x5p, 10 pcs 2x4p, 10 pcs 2x3p, 10 pcs 2x2p, 20 pcs 1x6p, 20 pcs 1x5p, 20 pcs 1x4p, 20 pcs 1x3p, 40 pcs 1x2p, 50 pcs 1x1p

Click Here If You Need More Detailed Info…