Cheetah TPU 3D Printing Filament – 3mm .75kg – FIRE

Cheetah flexible filament is the fastest and easiest to print flexible filament on the market. The focus in development of this material was on optimizing the user experience. The result is a filament that is printable across all types of desktop 3D printers at ABS and PLA speeds, many times twice the speed of other flexible materials on the market. Cheetah filament possesses industry leading durability along with impact strength 84% greater than ABS. The abrasion resistance is also second only to NinjaTek Armadillo product, making Cheetah the perfect blend of speed, toughness and strength. Suggested Applications: seals, plugs, hinges, sleeves & snap-fit parts KEY FEATURES: Abrasion resistance 40% better than ABS and 76% better than PLA 580% elongation capabilities improve ability to withstand wear and tear Patented low friction exterior allows for smooth feeding Chemical resistance to many materials, including: naphtha, ASTM Oils #1-3, petroleum and Freon Consistent diameter and material properties providing reliable, high quality prints REACH and RoHS 2002/95/EC Directive compliant PRINTING GUIDELINES: Extruder Temperature:  235°C – 245°C  Platform Temperature: Room temperature – 40°C Glue or blue painters tape is suggested if not using a heated bed. Print Speed:  Top and bottom layers: 30-45 mm/ sec (600-1200 mm/ min) Infill speeds: 60-80 mm/ sec (3600-4800 mm/ min) Layer 2+ use cooling fan if available.

Product Features

  • Print at speeds greater than 60 mm/sec
  • Impact resistance: 84% > ABS
  •  Industry leading toughness and durability
  • Shore Hardness = 95A
  • Suggested Applications: seals, plugs, hinges, sleeves & snap-fit parts

Check Out Our Website For Details…

Published by

3D Print Anything

3D Printing. The next Goldrush is on it´s way. Inside information on how to start printing in 3D, where to buy Printers, how to use them, and the newest Pictures and reviews of available 3D Printers.

2 thoughts on “Cheetah TPU 3D Printing Filament – 3mm .75kg – FIRE”

  1. Great filament for stock extruders I’m printing this using my Flashforge Finder printer. While I’m probably wearing out the hot end of the printer from printing this and PETG filaments, the results are worth it if the print runs properly.I did some Internet research on this filament, which gave me a good baseline to start out with so I haven’t had any drastic failures while printing with this filament. I have had bed adhesion issues but I can’t blame the filament, I have that problem with nearly any filament I run…

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.