[sg_popup id=1]

Comgrow Ender-3X Creality 3D Printer Upgraded Version with Tempered Glass and Five Nozzles


Modeling Technology:FDM (Fused Deposition Modeling)
Printing Size:220*220*250mm
Machine Size:440*410*465mm
Package weight:8.6kg
Max Traveling Speed:180mm/s
Filament:1.75mm PLA
Input:AC 100-265V 50-60Hz
Output:DC 24V 15A 360W
Layer Thickness:0.1-0.4mm
Nozzle diameter:0.4mm
Precision:±0.1mm
File Format:STL,OBJ,G-Code
Working Mode:Online or SD offline
Max Nozzle Temperature:255℃
Max Hot bed Temperature:110℃
Resume print after power off: Yes

Product Features

  • Ender 3 Upgraded Version: This Ender-3X comes with a tempered glass, which makes models are easier removed. It also makes the hot bed more flat.
  • Advanced Technology: MK-10 extruder greatly reduces plugging risk and bad extrustion; V-Slot with POM wheel makes it move noiseless, smoothly and durable. Five more free nozzles included.
  • Easy and Quick Assembly: It comes with several assembled parts, you only need about 2 hours to assemble 20 nuts well.
  • Resume Print: Ender 3X has the ability to resume prints even after a power outage or lapse occurs.
  • Strict Test: Strict testing for key components before delivery and life-time technical support.

Click Here For More Information

Published by

3D Print Anything

3D Printing. The next Goldrush is on it´s way. Inside information on how to start printing in 3D, where to buy Printers, how to use them, and the newest Pictures and reviews of available 3D Printers.

3 thoughts on “Comgrow Ender-3X Creality 3D Printer Upgraded Version with Tempered Glass and Five Nozzles”

  1. Came with a bent frame; essentially useless due to poor QC It took me about 2 hours to assemble this printer and start my first print. The instructions are terrible but there’s enough guidance online that other users have been kind enough to share. I have a fair amount of experience with 3D printing so I would expect it to take longer for a total newbie to get up and running.My first print had terrible vibration artifacts/ghosting. I noticed the bed had a bit of side to side wobble, so I tightened the eccentric nut underneath to stabilize…

  2. A great introductory printer for people looking to get into the hobby. Awesome!! This is my first 3d printer and it worked great, so far lol. I didn’t really get to finish the dog print that comes in the card cause there was not enough filment lol..As far as con go: both vertical pieces did not align right. I had use some force, to kind of bend the bolt so that the other bolt would go in.The other con would have to be the instructions. It’s not that clear but at the same time not that difficult. The good thing is that there a vids on YT…

  3. I purchase this a few weeks ago and have made several prints using PLA and PETG. From my experience:Pros:Overall, this is a great printer for a first time user. It does take some time and knowledge to get the thing set up. Instructions show illustrations for the steps, though I used a youtube channel to ensure certain points were installed correctly.The prints were easy to get started and the quality was very good. Additionally, integrating this printer with…

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.