eSUN 3mm Gold PLA PRO (PLA+) 3D Printer Filament 1KG Spool (2.2lbs), Actual Diameter 2.85mm +/- 0.05mm, Gold, (Pantone 124C)

This is 3mm/2.85mm filament. Please make sure your printer can support 2.85mm filament before buying this filament. This filament does not support 1.75mm 3D printers such as CR-10, FlashForge, Wanhao, MakerGear, Monoprice select and Prusa. This filament supports all 2.85mm open standard 3D printers such as Lulzbot and Ultimaker. Verify your printer before purchasing to avoid unnecessary returns.

eSUN 3D Printer Filament: PLA PRO

Size: 3mm nominal, 2.85 +/-0.05mm actual

Extrusion Temperature Range: 210 to 225 Celsius

PLA PRO(PLA+) Advantages:

Superb layer bonding
High rigidity. Good glossiness.
Several times tougher than PLA
Smoother finished printouts.
No cracking or brittle problem.

PLA PRO prints about 20 Celsius higher than regular PLA and produces strong products.

Product Features

  • 1KG net (approximately 2.2 lbs) Filament with Clear Spool, Gold color, Pantone 124C
  • eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA.
  • 3mm Filament. 2.85mm Actual Diameter (Dimensional Accuracy +/- 0.05mm). This is 3mm filament and actual diameter is 2.85mm +/- 0.05mm. This filament does not work with 1.75mm printers. Make sure your printer supports 2.85mm filament before purchasing to avoid unnecessary returns.
  • Recommended Extrusion/Nozzle Temperature 210C – 225C, about 20 Celsius higher than regular PLA.
  • Spool Diameter: 8″ – Spool Width: 2.50″ – Spool Hub Hole Diameter: 2.05″ – Inner Circle Diameter: 3.5″

Check Out Our Website For Details…

Published by

3D Print Anything

3D Printing. The next Goldrush is on it´s way. Inside information on how to start printing in 3D, where to buy Printers, how to use them, and the newest Pictures and reviews of available 3D Printers.

2 thoughts on “eSUN 3mm Gold PLA PRO (PLA+) 3D Printer Filament 1KG Spool (2.2lbs), Actual Diameter 2.85mm +/- 0.05mm, Gold, (Pantone 124C)”

  1. Very good, consistent, no problems This has worked well for me (I have only used black) – no problems that have plagued other PLA or PLA+ (twisted spooling, feed failures). This is over three full spools. I have taken no precautions for humidity – the spool stays exposed all day, year round in an air conditioned home. No problems with adhesion layer to layer or to Lulzbot Mini platform (PLA defaults, 210 degrees, wipe platform with alcohol before each print). The wiper must be kept in good condition or auto leveling will fail…

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.