GEEETECH A30 3D Printer with Large Print Size: 320×320×420mm and Power Failure Recovery, 3.2″ Full-Color Touch Screen, Good Adhesion of Platform, SMARTTO Open Source firmware, Half Assembled DIY Kit.

Note:If you want to achieve the function of Auto Leveling, you need to buy a capacitive proximity sensor. The printer doesn’t support 3d touch sensor.

Printing Specifications:
Print technology: FDM
Build volume: 320*320*420mm
Printing accuracy: 0.05mm
Positioning precision: X/Y:0.11mm. Z:0.0025mm
Printing speed: 50-100mm/s recommended
Filament diameter: 1.75mm
Nozzle diameter: 0.4mm
Filament: PLA, ABS, wood polymers, etc

Software:
Operating system: Windows, MAC, Linux
Control software: EasyPrint 3D, Cura,Repetier-Host,Simplify3D
File format: STL,OBJ,Gcode

Temperature:
Max temperature for hotbed: 100℃
Max temperature for extruder: 250℃

Electrical:
Power supply: 110V/220V, 50HZ~60HZ
Display screen: 3.2″ Full-color touch screen
Connectivity: Wi-Fi (with an optional 3D WiFi module), USB, SD card (support stand-alone printing)

Mechanical:
Frame: Aluminum profile
Build Platform: Aluminum heatbed+ tempered glass
XYZ Rods: Wear-resistant aluminum profile( XY Rods) and lead screw (Z axis)
Stepper Motors: 1.8°step angle with 1/16 micro-stepping

Physical Dimensions and Weight:
Machine Dimension: 508×615.5×630.5 mm
Shipping box Dimension: 670x560x300 mm
Machine Net weight: 11.7 kg
Machine Gross weight: 14.6 kg

Product Features

  • 1, Super Large Print Size: 320mm×320mm×420mm, it enables you to print large-size 3D models.
  • 2, Fast Self-assembly: Just takes about 10 minutes to install the Z-plane kit on the XY plane. Simple and convenient.
  • 3, Filament Detector: Detect the abnormal situation of filament, such as filament fracture and outage, and trigger a signal to remind you to change printing material in time.
  • 4, Silicon Carbide Glass Building platform: Silicon carbide glass with microporous coating as A30 building platform, without the need of attaching the masking tape.It is of good adhesion, freeing you from the headache of first layer warping.
  • 5, Power Failure Recovery: It can continue to print from the same place where it stops, regardless of unexpected power failure, stopping to change the filament, stopping and print it tomorrow.

Click Here For More Information

Published by

3D Print Anything

3D Printing. The next Goldrush is on it´s way. Inside information on how to start printing in 3D, where to buy Printers, how to use them, and the newest Pictures and reviews of available 3D Printers.

3 thoughts on “GEEETECH A30 3D Printer with Large Print Size: 320×320×420mm and Power Failure Recovery, 3.2″ Full-Color Touch Screen, Good Adhesion of Platform, SMARTTO Open Source firmware, Half Assembled DIY Kit.”

  1. Simply put. Amazing printer I must say I am very surprised on how easy this thing is to put together. I have an A8 and it took forever to get it done this one was done in 23 minutes and that is only because I went through and checked all other bolts and screws to make sure they were all tight( and they were). Putting together was literally four bolts and tighten a couple of screws in the side plates for the uprights, so literally I could have been done with assembly in under ten minutes. The workmanship and engineering on…

  2. When first getting this printer and opening it up to actually printing with it. I had nothing but positive reactions from this printer. Now I have a cr10s and this thing exceeds everything it has by performance and how it looks and features. The geetech a30 has multiple things that put it above its competitors. I’m going to start with the price. Obviously the geetech a30 is way lower than any other 3dprinter like it which is mind blowing seeing how detailed it is and how premium it is. It has a…

  3. I purchased the Geeetech A30 on 7/22/18 and it arrived on my door step on 7/24/18. Not only did I order the printer, I ordered 2 rolls of 1kg. PLA 1.75 (Black/White) filament. The filament came a day before the printer did which is mind blowing how it can go from New York to North Carolina in just a day. When the printer arrived, I contacted the customer service representative and he offered his assistance on how he could help me set the printer up. A little background information on myself. I…

Leave a Reply