Mitus ABS Plus filament is a superior grade compared to regular ABS. The Mitus ABS Plus grade has been engineered and designed for increased flexibility as well as increased strength compared to standard ABS. The proprietary Mitus ABS Plus formula produces prints with more shine and luster. When your prints demand high specifications, then Mitus ABS Plus grade filament is your choice.
Mitus filament is made using only 100% virgin materials. One common problem with China made filament is the rampant use of cheap plastic fillers such as calcium carbonate, which makes ABS very brittle and leads to extruder clogs. Mitus brand does not cut any corners, and uses only the highest grade raw materials combined with leading precision equipment. In fact, all Mitus brand filament is measured during extrusion with an industry leading four laser micrometers which controls the diameter and roundness tolerances. Another common problem with China made brands are the voids or cavities in the middle of the filament which cause uneven printing and even failures. Mitus brand filament is guaranteed to be void and cavity free.
All Mitus ABS filaments are produced with vibrant, full, rich, and even colors. Every Mitus color has a pantone color chip number for exact reproducibility. Each spool comes vacuum sealed with 99.98% of moisture removed and includes a desiccant pack. The spool features a unique double zipper storage bag which allows for the storage of the ABS spool after opening. Mitus brand guarantees complete satisfaction with every filament spool.
- Diameter: 1.75mm +/- 0.03mm
- Net weight: 1kg
- Proudly made in America
Special printing note – Depending on the 3D printer used, a slight increase in flow rate from 100 to 110-140 may be required. Additionally, some 3D printers will extrude more smoothly with a 5°C increase in temperature, from 240°C to 245°C for darker colors and 235°C to 240°C for lighter colors.
- ABS Plus grade has increased flexibility and strength compared to regular ABS
- ABS Print Extrusion Temperature: 230 – 245°C
- Quad laser micrometer for controlling diameter and roundness tolerances, within +/- .03mm
- Pantone color: PQ-19-4007TCX and hex color code: 28282d
- Proudly made in the USA