Senhai3D Delta Rostock 3D Printers DIY KIT 3-in-1-out Mix Colors Printing LCD Screen

Specifications:
Print technology: FDM
Build volume: cylindrical, D: 170mm, H: 230mm
Printing precision:0.1mm
Positioning precision:0.05mm
Printing Speed: 80-120mm/s
Filament diameter: 1.75mm
Nozzle diameter: 0.4mm
Filament type: ABS/PLA
Software:
Operating system: Windows/Mac/Linux
Control software: Repetier-Host, Printrun, Cura
File format: .STL, 3ds, obj, amf, dae, G-code
Temperature:
Max heated bed temperature: About 110 °C
Max extruder temperature: About 240°C
Electrical:
Power supply:
Input: 110V/ 4.8A or 220V /2.4A
Output:DC12V/20A
Connectivity: USB, SD card (support stand-alone printing)
Mechanical:
Build Platform: Aluminum alloy plate+ heatbed
XYZ Rods: Wear-resistant, stainless steel
Stepper Motors: 1.8°step angle with 1/16 micro-stepping
Physical structure: Delta Rostock
Physical Dimensions & Weight
Machine Dimension: 320 x 320 x 870mm
Shipping box Dimension: 510x410x210mm
Machine Net weight: 9.6kg
Machine shipping weight: 11kg
Package list
1 x Rostock 301 DIY kit
1x tool set
3 meter starter filament

Product Features

  • 3-in-1-out mix color 3D printing hotend ;The 3-in-1-out mix color 3D printing hotend is a single nozzle hotend for 3D printing in multiple colors that requires a minimum of calibration.
  • Easier calibration :The single nozzle eliminates the calibration problems associated with having separate nozzles for each color, and the single output orifice alleviates the problem of out-of-level nozzles hitting the working surface being created
  • Hardware upgrades : upgraded the GTM32 3d printer controller board
  • Firmware upgrades;Higher building speed and printing precession.Delta printer is that the moving parts are lightweight ,easier to travel.That results in faster printing with greater accuracy. To ensure the print speed, we have designed the hotend to have the smallest possible weight of 175g; the print speed can be up to 120mm/s.
  • Open color system :can also use Rostock 301 as a single extruder printer, a dual extruder and a 2-in-1-out extruder, which gives the printer an open color system

Click Here If You Need More Detailed Info…

Published by

3D Print Anything

3D Printing. The next Goldrush is on it´s way. Inside information on how to start printing in 3D, where to buy Printers, how to use them, and the newest Pictures and reviews of available 3D Printers.

One thought on “Senhai3D Delta Rostock 3D Printers DIY KIT 3-in-1-out Mix Colors Printing LCD Screen”

  1. BAD PRODUCT My experiance:I purchased this and when i plugged it in and turned it on it sparked and blew the board out. They sent a second board and it did the same. They refused to send replacement blaming me for the problem. I went out purchased a board that this sales says they dont sell but i did buy one from another sales rep of theirs. Once i found the problem that wire bundle wires were melted together i fixed and continued. I found the nozzle had no hole and they wanted me to send back to…

Leave a Reply