3D-Fuel HydroSupport Water Soluble Support 3D Filament 1.75mm 500g Made in USA

3D-Fuel HydroSupportTM Water Soluble Support 3D Filament 1.75mm 500g Made in USA

HydroSupport dissolves completely in water and is much easier to print with than PVA filament. Because it dissolves in water, HydroSupport only needs to be soaked a few hours to easily work supports off by hand, or 12 Ð 24 hours to dissolve completely. The process can be sped up further by using warm water and agitation.



Quality: All 3D-Fuel 3D printer filament is manufactured in our own production facility located in Fargo, North Dakota. We have complete control over the manufacturing process and are able to ensure consistent quality for every spool.

Diameter Tolerance: Variable diameter can cause big problems in your 3D printer. We use a multi-axis laser measurement system to control our filament diameter and ovality in real time during production. Every spool has the diameter and ovality measurements listed right on the box.

All 3D-Fuel filament arrives on a durable plastic reel and is vacuum sealed with a desiccant packet to keep out any moisture. 3D-Fuel filament is compatible with most 3D Printers including MakerbotTM, LulzbotTM, FlashForgeTM, WanhaoTM and many others.

Product Features

  • HydroSupport dissolves completely in water and is much easier to print with than PVA filament. Because it dissolves in water, HydroSupport only needs to be soaked a few hours to easily work supports off by hand, or 12 Ð 24 hours to dissolve completely. The process can be sped up further by using warm water and agitation.
  • Quality: All 3D-Fuel 3D printer filament is manufactured in our own production facility located in Fargo, North Dakota. We have complete control over the manufacturing process and are able to ensure consistent quality for every spool.
  • Diameter Tolerance: Variable diameter can cause big problems in your 3D printer. We use a multi-axis laser measurement system to control our filament diameter and ovality in real time during production. Every spool has the diameter and ovality measurements listed right on the box.
  • All 3D-Fuel filament arrives on a durable plastic reel and is vacuum sealed with a desiccant packet to keep out any moisture. 3D-Fuel filament is compatible with most 3D Printers including MakerbotTM, LulzbotTM, FlashForgeTM, WanhaoTM and many others.

Check Out Our Website For Details…

Luxnwatts Grey 1.75mm PLA 3D Printing Filament 1KG Spool Dimensional Accuracy +/- 0.05 mm for MakerBot Creality Anet Tevo 3D Printer 3D Pen Filament

Luxnwatts is trust and reliable supplier for 3D Printing and 3D Printing Parts, we try our best to improve our quality and user’s experience

our PLA filament is 100% virgin and environment-friendly resin, our filaments without cheap plastic fillers or regrind.

Feature:
-Extruder Type: Direct Drive/Bowden
-Tube Layer Height: 0.1-0.2 mm
-Fill Density: 0-100% (Wall thickness>0.4 mm)
-Printing Speed: 30-80 mm/s
-Printing Temperature: 190-220°C (374-428°F)
-Recommended Bed Temperature: 0-55°C (32-131°F);
-Recommended Bed Temperature: 40-55°C (104-131°F)
-Retraction Speed: 20-55 mm/s
-Retraction Distance: 3-8 mm

Product Features

  • 100% virgin material without cheap plastic fillers or regrind. Vacuum sealed with desiccant. 1kg net weight with 1.75mm diameter and 325m length
  • Tolerance ± 0.05mm, Spool Size diameter 195mm + inner hub 55mm height 60mm
  • Printing Temperature: 190-220°C (374-428°F), depending on printer model
  • Luxnwatts filament is compatible with Creality, Makerbot,FlashForge, Monoprice, XYZprinting and industrial FDM 3D printers

Check Out Our Website For Details…

HE3D 1.75mm Titan Extruder Full Kit for FDM 3D Printer accessory bowden mounting bracket supporting remote/short printing

1 We have assembled the Titan extruder , you can install it with the motor directly
2 This Titan extruder hotend driver feeder is for 1.75mm filament
3 It is gear extruder

Product Features

  • 1 It is very light and compact. it can use lighter motor,any Bowden-type 3D printer can become a powerful, reliable little beast
  • 2 t is easy to manually squeeze, remove, load and unload Filament
  • 3 You only need a hex wrench, you will be able to within a minute to remove the Titan, regardless of the opening and assembly are very easy and fast.

Detailed Information available on our Homepage…

AMOLEN 3D Printer Filament, Temperature Color Change PLA Filament 1.75mm +/- 0.03 mm, 200G(0.44lb), Green to Yellow, includes Sample UV Color Change Filament – 100% USA

Amolen provides higher quality 3D printing materials like PLA(includes silk /marble /bronze/copper/shining /wood PLA/conductive/glow in the dark/temp color change), PETG, flexible TPU and more.

Product Features

  • HIGH COMPATIBILITY – Perfectly compatible with most of the FDM 3D Printer, 1.75mm filament consistent diameter, dimensional accuracy +/- 0.03mm
  • SMOOTHLY PRINT- Orderly wrapped, melt well, feed smoothly and constantly without clogging the nozzle or extruder
  • TEMPERATURE CHANGING COLOR – Under 33ºC it looks green and above that it starts getting yellow
  • PREMIER MATERIAL – Raw materials are from USA, eco-friendly with good performance
  • HIGH PERFORMANCE – Good shaping, no bubble, no jamming, no warping

Click Here For More Information

Unime M6 0.4mm Stainless Steel Nozzle Extruder for 1.75mm Filament E3D V5-V6 3D Printer 10pcs

Unime All-Metal l Heatbreak Throat for V6 RepRap 3D Printer M6 0.4mm Stainless Steel Nozzle Extruder for 1.75mm Filament E3D V5-V6 3D Printer, 10 Pack
Package includes:
5 x stainless steel 3D printer nozzle
5 x stainless steel l heatbreak throat

Specifications of extruders nozzles:
Thread type: M6
Height: 15.5 mm
Width: 7 mm
Material: stainless steel
Input filament diameter: 1.75 mm
Nozzle output diameter: 0.4 mm
Installation: external M6 thread connection
Filament supported: ABS/ PLA/ PETG/ carbon fiber

Specifications of heatbreak throats:
Material: Stainless Steel
Compatible with 1.75mm Filament Hotends.
Inner diameter: 2mm for 1.75mm filament

Features:
The extruders nozzles and heatbreak throats are made of stainless steel material, solid and durable, which can help improve printer service life and reduce time;
It’s compatible with V5 and V6 extruder hotend, suitable for general 3D printer.

NOTICE:
These 3D printer parts are small parts, please keep them away from children to avoid swallow risk.

Product Features

  • 5pcs 3D printer nozzles and 5pcs all-metal l heatbreak throats.
  • Made of stainless steel, wear resistant, long service life
  • Heatbreak Throat: Compatible with 1.75mm Filament Hotends. Inner diameter: 2mm for 1.75mm filament.
  • MK8 extruders nozzles output diameter:0.4mm,1.75MM Filament. Filament supported: ABS/ PLA/ PETG/ carbon fiber.
  • Printer Nozzle Installation: external M6 thread connection

Visit The Website For More Information…