HESAI 3D Printer Kit Smart Parts RAMPS 1.4 Controller Control Panel LCD 2004 Module Display Monitor Motherboard Blue Screen

Description:

The intelligent controller includes an SD card reader, rotary encoders and a 20-character × 4 line LCD display. You can easily connect it to your RAMPS 1.4 board using “smart adapter” included.

This panel connect your RAMPS 1.4, you do not need your computer, your SD card intelligent controller power supply. All further operations, such as calibration, the axis movement can be done only with a rotary encoder intelligent controller. 3D design print without a computer, just use the G code design stored on the SD card.

Package List:

1x LCD 2004 Smart Controller

1x Smart Adapter

2x FC Cable

Product Features

  • Popular RepRap 3D Printer LCD Controller and SD Card Reader
  • Included adapter for RAMPS 1.4 board
  • Fully supported by Marlin firmware
  • With Smart LCD Controller you can print 3D designs without USB connection to your computer

Visit The Website For More Information…

Aluoflower Anet LCD 2004 LCD Blue Display Screen Controller Module for RAMPS 1.4 3D Printer Parts


Description:

Features:
100% brand new and high quality.
The large screen LCD display type: 4 lines 20 characters in each.
Comes with encoder, can realize parameter adjustment, choose print and file.
Plug and play, but need to modify the firmware.

Specifications:
Item Type: Anet LCD2004 LCD Display Blue Screen Controller
Model: Control Screen A2004
Color: Red+Green (shown as pictures)
Size: 16×6.5×1.5cm/6.30×2.56×0.59in (Approx.)
Quantity: 1PC (other accessories in the picture is not included)

Note:
1.Transition: 1cm=10mm=0.39inch
2.Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid.
3.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!

Package includes:
1 X Anet LCD2004 LCD Display Blue Screen Controller

Product Features

  • 100% brand new and high quality.
  • The large screen LCD display type: 4 lines 20 characters in each.
  • Plug and play, but need to modify the firmware.
  • Comes with encoder, can realize parameter adjustment, choose print and file.
  • Size: 16×6.5×1.5cm/6.30×2.56×0.59in (Approx.)

Visit The Website For More Information…

OSOYOO 3D Printer Kit with RAMPS 1.4 Controller + Mega 2560 board + 5pcs A4988 Stepper Motor Driver with Heatsink + 2004 LCD Display with Smart Adapter For Arduino RepRap


Caution:
1)pls pay more about attention about the guide and download the correct marlin for the 2004 LCD
2)Do not plug or unplug and wire or module when power is on, do not even touch the board when power is on or your hand has static charge(you can rmove static charge by touching metal tap) .
3) Always double check power wire is properly installed. If you do not follow above move, you can damage the control board and your 3D printer
4) Pls Confirm that the A4988 driver install correctly on the Ramps1.4.

Product Specification:
(1) Mega 2560 R3 Board
(2) RAMPS1.4 is designed to fit the entire electronics needed for a RepRap in one small package for low cost. RAMPS interfaces an Arduino-compatible Mega with the Arduino-compatible MEGA platform, RAMPS1.4 has plenty room for expansion. The modular design includes plug in stepper drivers and extruder control electronics on an Arduino-compatible MEGA shield for easy service, part replacement, upgrade-ability and expansion.
(3) A4988 Stepper Motor Driver is built-in translator for easy operation
(4) LCD 2004 with Controller contains a SD-Card reader, an rotary encoder and a 20 Character x 4 Line LCD display.

Package List:
1x Mega 2560 board for Arduino
1x USB Cable
1x 3D Printer Controller RAMPS 1.4 Board(Red Color)
5x A4988 Stepper Motor Driver with Heatsink
1x 2004 LCD with control board
1x Smart Adapter
2x FC flat cable

Product Features

  • 3D printer board Marlin firmware installation guide: http://osoyoo.com/driver/3D%20printer%20instructions.pdf
  • 3D Printer Controller RAMPS 1.4 interfaces an Arduino Mega2560 board. The modular design includes plug in stepper drivers and extruder control electronics on an Arduino-compatible MEGA shield for easy service, part replacement, upgrade-ability and expansion
  • With LCD 2004, print your 3D designs without PC, just with a g-code design stored on the SD card
  • It is designed to fit the entire electronics needed for a RepRap
  • Detailed tutorials and source code CAN BE PROVIDED FOR FREE

Click Here If You Need More Detailed Info…

Aibecy 2004 LCD Smart Display Screen Controller Module with Cable for RAMPS 1.4 Arduino Mega Pololu Shield Arduino Reprap 3D Printer Kit Accessory

Features:
2004 LCD smart controller for 3D printer.
Supports for RAMPS 1.4 control board.
Built-in encoding function allows you adjusting the parameter and selecting file to print.
3in screen, clear white characters with blue backlit, displays 4 lines and 20 characters per line.
With 5 buttons to enter MENU and axis direction adjustment.

Specifications:
Model: 2004
Screen: LCD
Screen Size: 3in
Item Weight: 129g / 4.6oz
Package Size: 18 * 10 * 3cm / 7.1 * 3.9 * 1.2in
Package Weight: 132g / 4.7oz

Package List:
1 * 2004 LCD Screen
1 * Cable

Product Features

  • 2004 LCD smart controller for 3D printer.
  • Supports for RAMPS 1.4 control board.
  • Built-in encoding function allows you adjusting the parameter and selecting file to print.
  • 3in screen, clear white characters with blue backlit, displays 4 lines and 20 characters per line.
  • With 5 buttons to enter MENU and axis direction adjustment.

Detailed Information available on our Homepage…

FICBOX 2004 LCD Smart Display Controller Module with Adapter for 3D Printer Controller RAMPS 1.4 Arduino Shield RepRap

2004 LCD Module Control for 3D Printer Reprap Smart Controller Ramps 1.4
The intelligent controller includes an SD card reader, rotary encoders and a 20-character × 4 line LCD display
The product comes with an encoder, parameter adjustment can be achieved, and the file selection print
With RepRapGuru Smart LCD Controller you can print 3D designs without USB connection to your computer

Package Included:
1 x 2004 LCD Module

Product Features

  • Popular RepRap 3D Printer LCD Controller and SD Card Reader
  • Using a large screen LCD 2004 4 lines of 20 characters per line
  • Included adapter for RAMPS 1.4 board
  • 3D design print without a computer, just use the G code design stored on the SD card
  • The smart controller by the encoder creates all other operations, such as calibration or axis movement etc

Visit The Website For More Information…