[sg_popup id=1]

CCTREE 3D Printer Build Surface with 3M Sticker 3D Printer heated bed Sheet for Creality CR-10 CR-10S 300x300mm (Pack of 3)

Size:310mm x 310mm (12.2″x12.2″)
Background is made of 3M adhesive , easily stick on the heat bed platform


There are 2 methods to attaching the build surface on heatbed:

1. clamp the build surface to the print bed using binder clips(at least 3 clips)

2. Torn off 3M tape on back and stick it on heatbed.

Product Features

  • Size:310mm x 310mm (12.2″x12.2″)
  • Build sheet adheres to a print bed to help the filament stick during printing, while also enabling clean removal of the printed part afterward
  • Compatible with ABS, PLA, HIPS and other filament
  • Single sheet design installs more quickly and with fewer bubbles than tape or films
  • Durable construction allows for multiple uses with either the same or different filament material

Visit The Website For More Information…

3DTOP 12v 280w Silicone Rubber Heating Heater for 3d Printer Heated Bed 300x300mm

Continuous temperature:120.00°C-180.00°C
The maximun temperature:150.00°C-200.00°C
Maximum : 300.00mm * 5000.00mm
Minimum : 25.00mm * 25.00mm
Wire length:100.00mm
Silicone heater Specifications
Temperature range:-40.00 – 200.00°C;
Resistance value:±8%
Current density:0.10~1.50w/cm2
Mechanical pressure:100.00kg/cm2
Minimum bend radius:3.20mm
Package contents :
1 x Silicone heated 300*300mm bed

Product Features

  • Silicon Rubber Heating Pad/Sheet has advantages of thinness, lightness, sticky and flexibility
  • It can improve heat transfer, accelerate warming and decrease power under the process of operation
  • Heating fast and thermal conversion efficiency high
  • Excellent heat source for your 3D printer heatbed

Detailed Information available on our Homepage…

300x300mm 12V Silicone Rubber Heater for 3D Printer Heated Beds

This is the ultimate heating element for your 3D printer’s bed. This is a premium silicone rubber heater, normally used in industrial environments to heat large tanks of liquid. We had these custom made to be the fastest, most evenly heated elements available. They include a built in 100k thermistor for accurate readings with easy setup. They run off 12v power so no dangerous voltage and they CAN be run directly with some electronics (some electronics may require a relay due to the current draw). We have tested these with a Azteeg X1 and X3 from http://www.panucatt.com as well as the RAMPS 1.4 directly with no problems (YMMV). These heaters are flexible and WILL REQUIRE a flat build surface such as glass to mount to.

  • 300mm x 300mm / 12″x12″
  • Durable Silicone Rubber Construction
  • Extremely Even Distribution of Heat
  • Industrial Duty Cycles For Long Life
  • Heats To 120 Degrees C in About ONE Minute (assuming adequate power supply)
  • Integrated 100k Thermistor For Accurate and Reliable Temperature Readings
  • Integrated Thermistor Beta Value 3950K
  • Thermistor Leads Are Insulated and Ready
  • Draws Up to 20 Amps So Make Sure Your Power Supply Can Handle It…a 400W+ or Dedicated 12v Power Supply Is Recommended

Product Features

  • Most Even Heating Even to the Edges of All Heater Types
  • Includes Integrated 100K Thermistor (Epcos #1 Table)
  • FLEXIBLE and Requires Build Surface (Basalt, Aluminum, Glass etc.)
  • Adhere with Silicone to Build Surface

Detailed Information available on our Homepage…