3D Printer Parts Accessory Hot End Assembled Extruder Kits 1.75mm Filament Direct Feed 0.4mm Nozzle CR-10S

Product feature

100% brand new and high quality.

Tip of the nozzle, aluminum heating block, Throat pipe (built-in kit).

Material: Aluminum & Stainless Steel & Brass

Installation type: external thread connection

Scope of application: 3D printer

Nozzle size: 0.4mm

Throat pipe length: 30mm

Operating temperature range: -40 ~ +260°C (-40 ~ +500 °F)

Package included:

1x Pneumatic connector 

1x Aluminum block

1x Fast Cooling

1x 1.75MM 0.4MM Brass Nozzle

1x M6*30mm Throat pipe (built-in kit)

Note:

Small parts, keep away from children 

Product Features

  • Exchanged For Nozzle- Nozzle is can be exchanged or replaced with many different types of nozzles in the market
  • Metal Base and Aluminum Block- DIY 3D printer extruder hotend requires heat sink to operate properly
  • Assembled Extruder- Reprap Prusa i3 3D Printer
  • High Quality- Stainless updated barrel tube for trouble free, low friction print,much solid quality
  • Attention- Small parts, keep away from children

Visit The Website For More Information…

Fenteer 5pack 3D Printer Accessory Painter Bed Print Sticker Build Plate Tape 200x200MM

Description:

– Material: US profile paper
– Size: 200x200mm
– Applies to: 3D printer hot bed

Package Includes:

5Pieces Heated Bed Plate Tape

Product Features

  • Material: US profile paper
  • Size: 200x200mm
  • Applies to: 3D printer hot bed

Detailed Information available on our Homepage…

WINGONEER 3D Printer MK8 Remote Extruder Accessories 1.75 Filament All Metal Remote Extruder For MK8 Prusa i3 or Kossel RepRap DIY Kits Aluminum Frame Block Accessory (Right hand)

WINGONEER 3D Printer MK8 Remote Extruder Accessories 1.75 Filament All Metal Remote Extruder For MK8 Prusa i3 or Kossel RepRap DIY Kits Aluminum Frame Block Accessory (Right hand)

1. MK8 remote printer head right hand (not included steppter motor )
2.This is improved version, there are 2pcs Pneumatic fittings so that it feeds more fluently.
3.3D Printer MK8 Bowden Extruder kit v
4.Used for 1.75mm/3mm filament, Reprap, Makerbot
5.Type: Right hand

Specifications
Material:Full Metal Aluminum Alloy
Color: As shown

Package Including
1 x MK8 extruder DIY kits (Right hand version)

Product Features

  • Used for 1.75mm filament, Reprap, Makerbot ,Prusa 3D Printer
  • Equipped with two pneumatic fittings, the feed process more smoothly.
  • Type: Right hand
  • 3D Printer MK8 Bowden Extruder kit
  • Equipped with two pneumatic fittings, the feed process more smoothly, you can make your extruder closer to the print head (reducing brushed remote feeding problems arising from this can to some extent), while the supplies can be placed in a more appropriate position, and not worry about other issues stuck supplies)

Visit The Website For More Information…

Honbay 30pcs Heated Bed Compression Spring for 3D Printer Extruder Accessory

Nickel plated compression springs
Pack of 30
Material: metal
Size: 22*7.5mm (0.86*0.29 inch, L*D); Inner diameter: 5mm (0.19 inch)
Use for heated bed assembly or other equipment

Product Features

  • High quality compression springs
  • Size: 22*7.5mm (0.86*0.29 inch, L*D); Inner diameter: 5mm (0.19 inch)
  • Nickel plated, better corrosion resistance and surface hardness
  • Use for heated bed assembly or other equipment
  • Pack of 30

Detailed Information available on our Homepage…

Extruder Part Hot End, MACTISICAL 3D Printer Hot End Assembled Extruder Kits Hictop Parts Accessory with 1.75mm Filament Direct Feed 12V Extruder 0.4mm Nozzle

100% Brand new and Premium Professional Grade MACTISICAL 3D Printer Hot End Assembled Extruder Kits Hictop Parts Accessory .

Specification
Type: Assembled Extruder Kits
The kits include: 1 pc Aluminum Heater Block, 1 pc 1.75MM Tube and 1 pc 0.4MM Brass Extruder Nozzle (extra 4pcs for spare)
Pre-wired thermistor to the updated heater block
Input Diameter: 1.75mm
Output diameter: 0.4mm
Voltage: 12V
Extruder Tube
Type: Nozzle Throat
Compatibility: 3D Printer
Outer Thread: M6
Nozzle Throat Outer Diameter: 7mm
Nozzle Throat Inner Diameter: 4mm
Teflon Pipe Inner Diameter: 2mm
Length: 26mm
Filament Diameter: 1.75mm
Material: Stainless Steel
Extruder Brass Nozzle
Nozzle: 0.4mm
Input Diameter: 1.75mm
Output Diameter: 0.4mm
Material: copper (brass)
Size: 5*13mm

Package Content:
1 x Assembled Extruder Kits
4 x 3D Printer Extruder Brass Nozzle Print Head (0.4mm)

Attention: Small parts, keep away from children

Product Features

  • ★ WELL MADE- New material with superior quality stainless throat, heater cartridge and High-grade Aluminum block for best connectivity and long life.
  • ★ PRECISION MATCHING – Chamfer design, much easier for feeding; Sandblastng surface & anodic oxidation treatment.
  • ★ EXQUISITE WORKMANSHIP – Capable of printing high temperature melting plastics such as polycarbonate and nylon.
  • ★ MULTIFUNCTION – Hotend can be used for both: direct feed and bowden applications. Good for ABS, PLA and other conventional print materials.
  • ★ MEET YOUR NEEDS –  The item is a 3D printer extruder which saves 35% more power, compatible with all 1.75mm PLA ABS printer.

Visit The Website For More Information…