Kodak Portrait 3D Printer features a large build area and can fit on your desk

Kodak was a giant of the market during the golden age of film photography but with the growth of digital photography, it took a hard blow and went to …

Basic 3D Printer Kit (13″ x 13″ x 13″ Print Area)

Cobblebot Basic V2 Kit This item is a Cobblebot Basic V2.1 3D printer kit. The V2.1 is modified version of the original Basic and has a smaller print area.   Technical Specifications    Build/Print Dimensions: 13″ x 13″ x 13″  Layer Height: 100-300 micron  Print Speed: 30 – 150mm/sec  Weight: approximately 32 lb  Connections: USB & SD Card.  Materials supported: ABS, PLA, Nylon, Polycarbonate, Flexible Filament, LayWood, PVA, HDPE  Hotend:  All Metal Hexagon Hotend, .4mm Nozzle;  Filament Size: 1.75mm  Power Supply: 12V 30A included. Cable, EU included.  Electronics:  Ramps 1.4 & MEGA 2560  LCD: Included  Stepper Drivers: A4988 (Default – Allows 1/16 stepping)    This item comes as a kit and requires assembly.  This product comes with a 30 day limited warranty.

Product Features

  • Large Build Volume
  • 13″ x 13″ x 13″ Print Area
  • All Metal Hexagon Hotend
  • One of the most sold DIY 3D Printer KITS!
  • Comes as Kit, Requires Assembly.

Click Here If You Need More Detailed Info…

Arcam subsidiary AP&C investing $31M to build 3D printing metal powder plant for Montreal area

Jul 12, 2016 | By Tess

So far, the 2016 Farnborough International Airshow is shaping up to be an exciting exhibition for additive manufacturing technologies. With Airbus’ Andy Anderson announcing that the company foresees the testing of 3D printed satellites in the near future, with SAP and APWorks announcing a co-innovation agreement for the adoption of on-demand industrial 3D printing, and with Norsk Titanium announcing additional funding for its industrial 3D printing facility in Plattsburgh, NY, the past few days at the Airshow have been quite exciting.

Now, it seems Canada will get a piece of the 3D printing pie, as additive manufacturing equipment company Arcam AB has just announced that its powder manufacturing subsidiary Advanced Powders & Coatings (AP&C) will be investing in a second factory in the Greater Montreal area. The announcement was made at the Farnborough International Airshow in Hampshire, England.

Quebec based AP&C, which was acquired by its Swedish parent company Arcam AB in 2014 for $35 million, will reportedly be investing $31 million in the new facility which will be dedicated to making advanced metal powders used for additive manufacturing within the aerospace and biomedical industries. The financing for the new facility, which will be located in Boisbriand just outside of Montreal, was arranged in collaboration with Montréal International and Investissement Québec (IQ) who are offering the project up to $10 million in interest free loans and $1.5 million in grants.

Magnus René, CEO of Arcam, says of the investment, “The support from Investissement Québec and Montreal International is important for our ability to expand quickly to address the increased demand for high end titanium powder. Arcam is determined to serve the fast growing Additive Manufacturing industry through cost efficient solutions thus converting traditional manufacturing into Additive Manufacturing.  A requisite is to offer highest quality metal powder for production at competitive cost.”

Currently, AP&C employs nearly 85 workers at its existing Boisbriand factory and is expected to hire about 106 more over the next three years for its new, more automated facility, effectively increasing its Quebec workforce by more than double. Additionally, AP&C’s second facility will allow the company, Arcam’s main supplier of titanium powders, to expand its production to meet growing demands, especially within the aerospace industry.

“Montréal International, Greater Montréal’s economic development agency, provided strategic support that has been key in making our expansion project possible,” explains Alain Dupont, President of AP&C. “With this investment we can provide our existing and future clients with superior quality materials to meet the high manufacturing standards of the aerospace and biomedical industries. The new powder production facility and advances in atomization facility and advances in atomization technology will significantly increase our production capacity in 2017 and beyond.”

Posted in 3D Printer Company

Maybe you also like:

JGAURORA Desktop 3D Printer Build Area 11*7.1*7.1in Printing Material Plastic ABS PLA TPU PA WOOD Filament 1.75mm

Shenzhen Aurora Technology Co.,Ltd.is specialized in desktop 3d printer in China with its strong R&D dept.and professional after sales service team

Model Number:Z-603S
Printing size:11*7.1*7.1in
Offline printing:SD card
LCD screen:Yes
Nozzle diameter:0.4mm
Hot bed material:Aluminum substrate
Printing filament:PLA,ABS,TPU.PA.WOOD 1.75mm
Filament diameter:1.75mm
Software Language:Multi-Language
Date import format:STL,G-Code
Device dimension:18.9*14.37*16.14in
Device weight:37.47LB
Packing demension:575*460*510mm
Packing weight:48.50LB
Operating system:XP, WIN7, WIN8
Control software:Cura

Package Contains:
-Machine Z-603S
-1x Spool Holders
-1x filament guide tubes
-Nuts, screws and Hex Wrench Kit and testing filament
-Power Supply Cable
-USB cable
-1×8GB SD card and Reader (contains software, test sample files and operation manual)

Product Features

  • FDM Desktp 3d Printer Build Size 11*7.1*7.1in
  • Printing Plastic filament work with 3d STL Gcode open source Cura software
  • High precision 3d Printer Popular Industry School educations application
  • Plastic rods ABS PLA TPU PA WOOD filament 1.75mm
  • Net Weight 37.47LB Shipping Weight 46.29LB Packing Size 22.6×18.1×20.1in

Check Out Our Website For Details…

Ideawerk WT200 3D Printer, 5.9″ x 5.9″ x 5.1″ Build Area, White

Using an advanced algorithm to improve the quality of printed objects, it can print with detailed precision at a 0.18 mm layer thickness. One roll of PLA printing material is included.

Product Features

  • Compatible with Windows and Mac OS. And able to connect your current technology suite. Software& accessories is Free
  • Long-lasting continuous printing and Delivered with thoughtful tool kit to strip off the supportive plastic conveniently and easily
  • Large build area of 150 x 150 x 140 mm

Click Here If You Need More Detailed Info…