WINSINN 3D Printer J-head V6 Hotend Extruder Kit – High Speed Volcano Upgrade + Sensor Copper heater block 0.4mm Copper & Stainless steel Nozzle For PT100 1.75mm Filament

►This is The latest V6 kit, replacement parts is very easy, so you can easily upgrade your printer. High-quality stainless steel nozzle + copper heating block + TC4 titanium alloy, you can ultra-high temperature printing. Let’s try it :)))

 

—————————————————————————————————————

 

►TC4 titanium alloy: TC4 titanium alloy material composition is Ti-6Al-4V, (a + b) type titanium alloy, It has good mechanical properties, specific strength. TC4 strength sb = 1,012MPa, density g = 4.4 x 103, specific strength sb / g = 23.5, while the specific strength of alloy steel sb / g is less than 18. Titanium alloy has low thermal conductivity. Titanium alloy thermal conductivity 1/5 of steel , 1/13 of aluminum, 1/25 of copper , TC4 thermal conductivity l = 7.955W / m.K. The above data is only for reference.

 

—————————————————————————————————————

 

►Sensor heater block is the 2016 new V6 heater block, it compatible with PT100 sensor, size 23*16*12mm

►Copper heater block is The latest heating block, suitable for ultra-high temperature printing, size 22*16*11.5mm

 

—————————————————————————————————————

 

Package include:
►1 x High quality copper + stainless steel 1.75mm-0.4mm nozzle
►1 x High quality copper + stainless steel 1.75mm-0.4mm Volcano Sharp nozzle
►1 x High quality Standard V6 + Volcano +Copper heater block
►1 x TC4 titanium alloy + 4.1mm Bore Heat Break
►1 x V6 Aluminum alloy Radiator + PC4-01 Pneumatic fittings
►1 x Heatsink Shroud + High Speed 3010 Fan 12V 0.1A 9000±RPM
►1 x 12V 40W 1m Heater Cartridge Cable + NTC 100K 3950B Temperature sensor
►2 x Allen wrench + 4 x Fan fixing screw

Product Features

  • Emergency Notice: Recently some customer feedback that V6 heat sink had the thread error, the heat sink in the kit is M6 thread, it can not be used. We are very sorry about this problem. This is our mistake. We apologize to all customers. If you have received a problem product, don’t worry. Contact us immediately, keep your product, we will re-send to you immediately for free. Thank you!
  • TC4 Titanium alloy Heatbreak – Ultra-low thermal conductivity, Make sure the printer stable operation.
  • 3 Models of heater blocks, upgrade your printer, experience the latest high-temperature printer technology.
  • High quality International copper nozzle + stainless steel nozzle (1.75mm-0.4mm)
  • Suitable use for Remote and 1.75mm Filament. With Heatsink Shroud + High Speed 3010 Fan, the fan 0.1A 9000+-10%RPM

Click Here If You Need More Detailed Info…

Upgraded Replacement Parts 3D Printer MK8 Exturder Kit Aluminum Frame Block DIY Kit Accessories for Creality CR-10 3D Printer Series

UCHOOSE, a King Professional 3D printer and Printing Parts Store.
For High Quality & Good Service, We are diligent to Do Our Best !

REPLACEMENT PARTS EXTRUDER KIT 3D PRINTEING ACCESSORIES FOR CR-10 3D PRINTER SERIES

SPECIFICATIONS:
Mounting screws
Aluminum MK8 ‘Extruder’ frame, with bored intake hole.
Bushing
Spring
Brass ‘extruder’ drive gear
35 mm long teflon intake guide. (keeps filament away from Z-screw rod)
Special Bowden tube fitting (improved over stock). For all 1.75 mm filament

Product Features

  • UPGRADE REPLACEMENT PARTS FOR CREALITY 3D PRINTER CR-10 SERIES
  • ORIGINAL ALUMINUM ALLOY DRIVE FEED FOR CR-10 /CR-10S /CR-10 S4/CR-10 S5, IT IS STABLE AND DURABLE.
  • MK8 EXTRUDER DRIVE FEED KITS, CAN REPLACE ACRYLIC PARTS
  • 3D PRINTER MK8 BOWDEN EXTRUDER FRAME. USED FOR 1.75MM FILAMENT
  • FULL METAL ALUMINUM ALLOY, DIY ALUMINUM BLOCK,NEED TO ASSEMBLY BY YOUSELF

Visit The Website For More Information…

Wangdd22 5PCS V6 Volcano Aluminium Heater Block for E3D Volvano Print Head Hot End Heating Block for 3D Printer Parts

Description:
Brand new and high quality
Volcano Heater block for 3D printer.
Material: Aluminum alloy.
Threaded Tube Hole: M6.
Heater Mounting Hole: 6mm diameter
Thermocouple Mounting Hole: M3.
Size: 20*20*11.6mm/0.79″*0.79″*0.47″

Package list:
5 x Volcano Heater block

Product Features

  • Material: Aluminum Alloy
  • size: 20mm x 20mm x 11.6mm
  • Threaded Tube Hole: M6
  • Heater Mounting Hole: 6mm diameter
  • Thermocouple Mounting Hole: M3

Visit The Website For More Information…

3D Printer Accessories Kit – 3D Printer Parts Include 5pcs Brass Extruder Nozzle, 5PCS Drill Bits, 5pcs 30mm Extruder M6 Tube, 5pcs Aluminum Heater Block, 5pcs Heating Block Cotton

Specification of Brass Nozzle:
Type : 0.4mm Extruder Brass Nozzle Print Head
Color: Golden
Material: brass
Size: 5*13mm
Input Diameter: 1.75mm
Output Diameter: 0.4mm

Specification of drill kit:
Type :Drill kit
Material: silicone
Bit diameter: 0.4mm
The bit length: 8mm
The length of shank: 20mm

Specification of Extruder Tube:
Type : Nozzle Throat
Compatibility : 3D Printer
Outer Thread : M6
Nozzle Throat Outer Diameter:7mm
Nozzle Throat Inner Diameter:4mm
Teflon Pipe Inner Diameter : 2mm
Length : 30mm
Filament Diameter : 1.75mm
Material : Stainless Steel

Specification of aluminum heater block:
-Material: Aluminum
-Dimensions: 20*20*10mm(LWH)
-Inner hole for set screw: M6 and M3 (heat pipe and thermocouple)
-Heater Mounting Hole: 6mm diameter
-Thermocouple Mounting Holes:3mm diameter
-Suitable for Makerbot printer

Specification of heating block cotton:
Material: cotton
Note: this product only suitable for 3D printer using indoors
WAHHING Heater Block Cotton Safe working temperature: <300°C
This Heater Block Cotton in normal working, may be appear some slight smoke, and the color will turn into dark brown and black is normal, it will not burn! please feel relieved to use!

Attention: Small parts, keep away from children

Package include:
5 x 0.4MM Brass Extruder Nozzle Print Heads
5 x 0.4mm Drill Bits Nozzle Cleaning Kit
5 x 30mm Extruder M6 Tube
5 x Aluminum Heater Block
5 x Heating Block Cotton

Product Features

  • Package includes: 5x 0.4MM brass extruder nozzle print heads, 5x 0.4mm drill bits nozzle cleaning kit, 5x 3D printer nozzle throat, 5x aluminum heater block, 5x heating block cotton (for MK8 Makerbot Reprap Prusa I3 3D Printer)
  • Extruder Brass Nozzle Print Head: Material – High quality copper (brass); Size – 5*13mm; Output Diameter – 0.4mm; Input Diameter – 1.75mm; golden color, for MK8 Makerbot Reprap 3D Printers
  • Cleaning Drill Bits: Made of high carbon steel and treated with nickle-iron alloy. Diameter – 0.4mm; Length – 8mm; The length of shank – 20mm
  • Nozzle Throat: Material – Stainless Steel; Outer Thread – M6; Inner Diameter – 2mm; Length – 30mm; Filament Diameter – 1.75mm
  • Compatibility with all 1.75mm PLA ABS 3D printer, works with Anet A8

Detailed Information available on our Homepage…

WINGONEER 3D Printer MK8 Remote Extruder Accessories 1.75 Filament All Metal Remote Extruder For MK8 Prusa i3 or Kossel RepRap DIY Kits Aluminum Frame Block Accessory (Right hand)

WINGONEER 3D Printer MK8 Remote Extruder Accessories 1.75 Filament All Metal Remote Extruder For MK8 Prusa i3 or Kossel RepRap DIY Kits Aluminum Frame Block Accessory (Right hand)

1. MK8 remote printer head right hand (not included steppter motor )
2.This is improved version, there are 2pcs Pneumatic fittings so that it feeds more fluently.
3.3D Printer MK8 Bowden Extruder kit v
4.Used for 1.75mm/3mm filament, Reprap, Makerbot
5.Type: Right hand

Specifications
Material:Full Metal Aluminum Alloy
Color: As shown

Package Including
1 x MK8 extruder DIY kits (Right hand version)

Product Features

  • Used for 1.75mm filament, Reprap, Makerbot ,Prusa 3D Printer
  • Equipped with two pneumatic fittings, the feed process more smoothly.
  • Type: Right hand
  • 3D Printer MK8 Bowden Extruder kit
  • Equipped with two pneumatic fittings, the feed process more smoothly, you can make your extruder closer to the print head (reducing brushed remote feeding problems arising from this can to some extent), while the supplies can be placed in a more appropriate position, and not worry about other issues stuck supplies)

Visit The Website For More Information…