5pcs 3D Printer Extruder 30mm M6 Tube | 0.4mm Brass Extruder Nozzle Print Heads | 0.4mm Drill Bits Cleaner Kit for MK8 Makerbot Reprap 3D Printers

How to use the Cleaner Drill Bits:
1. pull out the nozzle head.
2. heating the nozzle head to consumptive material melting temperature
3. use the cleaner kit to Drill In (not insert directly which would break the drill bit)
4. when you put the drill bit out of the nozzle head, if there is something like yellow sticky jelly stick on the drill bit (which is very sticky on hand), please replace the nozzle head directly. This is because impurities inside the consumptive material melt, which become a layer of mucus stuck in the nozzle head. Normally you can’t clean them up with the drill bit. You might want to replace a nozzle head or even the nozzle throat.

Extruders:
Size: 30mm*M6
Material: Teflon PTFE core & stainless steel
Weight: 2.6g
Inner diameter: 2mm
Applies to makerbot or 1.75mm special supplies 3D printer construction.

Nozzle Print Heads:
Size: 13*6mm
Weight: 2g
Material: brass
Nozzle accuracy: 0.4mm
Thread: M6

Makerbot Mk8 Nozzle applies 1.75mm abs/pla material Compared with Mk7, mk8 has larger inner diameter and better support for PLA material This MK8 nozzle is an upgraded version of MK7, better performance than MK7, MK7 applicable 3D printer, MK8 nozzle is also applicable

Nozzle Drill Bits Cleaner:
Weight: 0.4g
Total length: 31mm
Drill bit length: 11mm
Drill diameter: 0.4mm

Please kindly note:
Don’t use the drill to clean until the nozzle is heated to above 200 degrees!

Package Including:
5 x Extruders
5 x Nozzle Print Heads
5 x Nozzle Cleaner Drills
Attention: Small parts, keep away from children!!!

Product Features

  • This package includes 5pcs 3D Printer Extruder, 5pcs Brass Extruder Nozzle Print Heads and 5pcs cleaning Drill Bits
  • 3D Printer Extruders, made of Teflon PTFE core and 304 stainless steel material
  • 3D Printer Nozzles, made of international grade brass material
  • 3D Printer Nozzles Drill Bits Cleaner, 0.4mm precision, solid and not easy to break
  • 100% SATISFACTION GUARANTEE – At an affordable price, then simply and roughly a 30-Day 100% Satisfaction or Money Back Guarantee, and 60-Days return without a single question. Try this 3D printer accessories set risk free now

Click Here If You Need More Detailed Info…

Aunifun 5Pcs 30MM Length Extruder 1.75mm Tube and 5Pcs 0.4mm Brass Extruder Nozzle Print Heads And 5Pcs Aluminum Heater Block Specialized for MK8 Makerbot Reprap 3D Printers

✿Specification of Extruder Tube:
Type : Nozzle Throat
Compatibility : 3D Printer
Outer Thread : M6
Nozzle Throat Outer Diameter:7mm
Nozzle Throat Inner Diameter:4mm
Teflon Pipe Inner Diameter : 2mm
Length : 30mm
Filament Diameter : 1.75mm
Material : Stainless Steel

✿Specification of Brass Nozzle:
Type :0.4mm Extruder Brass Nozzle Print Head
Color: Golden
Material: brass
Size: 5*13mm
Input Diameter: 1.75mm
Output Diameter: 0.4mm
Compatible: compatible with all 1.75mm PLA ABS printer.

✿Specification of Heater Block:
Dimensions: 20*20*10mm(LxWxH)
Net Weight: 7g/pcs
Inner hole for set screw: M6 and M3 (heat pipe and thermocouple)
Heater Mounting Hole: 6mm diameter
Thermocouple Mounting Holes:3mm diameter
Suitable for Makerbot printer

Package Including:
5 x 3D Printer 30mm length 1.75mm Nozzle Inputting Tube( for MK8 Makerbot Reprap Prusa I3 3D Printer)
5 x 3D Printer 0.4mm Extruder Brass Nozzle Print Head
5 x Aluminum Heater Block

Attention: Small parts, keep away from children!!!

Product Features

  • ✿✿✿ Made of solid aluminum material, durable in use.
  • ✿✿✿ Nozzle Throat: Outer Thread – M6; Inner Diameter – 2mm; Length – 30mm; Filament Diameter – 1.75mm; Material – Stainless Steel.
  • ✿✿✿ 0.4mm Extruder Brass Nozzle Print Head: Color – Golden; Material – copper (brass); Size – 5*13mm; Input Diameter: 1.75mm; Output Diameter: 0.4mm.
  • ✿✿✿ Nozzle Throat and Nozzle Print Head compatible with all 1.75mm PLA ABS 3D printer.
  • ✿✿✿ Heater Block Inner hole for set screw: M6 and M3 (heat pipe and thermocouple)

Detailed Information available on our Homepage…

EAONE 12pcs M6 3D Printer (2x 0.2mm/ 2x 0.3mm/ 6x 0.4mm/ 2x 0.5mm) Extruder Brass Nozzle Print Head for MK8 Makerbot


EAONE 12pcs M6 3D Printer (2*0.2mm+2*0.3mm+6*0.4mm+2*0.5mm) Extruder Brass Nozzle Print Head for MK8 Makerbot

Specification of Brass Nozzle:
Type: Extruder Brass Nozzle Print Head
Color: Golden
Material: brass
Input Diameter: 1.75mm
Output diameter: 0.2mm 0.3mm 0.4mm 0.5mm

Attention: Small parts, keep away from children

package including:
2x 0.2mm Nozzle Print Head
2x 0.3mm Nozzle Print Head
6x 0.4mm Nozzle Print Head
2x 0.5mm Nozzle Print Head

Product Features

  • 12pcs M6 3D Printer (2*0.2mm+2*0.3mm+6*0.4mm+2*0.5mm) Extruder Brass Nozzle Print Head for MK8 Makerbot
  • Compatible with all 1.75mm pla abs printer
  • Material: brass
  • Input diameter: 1.75mm; Output diameter: 0.2mm 0.3mm 0.4mm 0.5mm
  • Installation: external M6 thread connection

Detailed Information available on our Homepage…

HICTOP 295mm Dia 8mm Lead Screw with Brass Nut for 3D Printer Z Axis(pack of 2)

295mm Lead Screw 3D Printer Z Axis Lead Screw ACME Lead Screw 8mm Screw Pitch

Specifications:
Material: Stainless steel lead screw, copper nut
Screw diameter: 8mm
Length: 295mm
Screw spacing: 2mm
Lead of thread: 8mm
Range: Reprap makerbot 3d printer accessories
3D engraving machine lead screw 295mm length with nut.
Nut turn an around move 8mm

Package include:
2x 295mm lead screw
2x Brass Nut

Product Features

  • Screw diameter: 8mm Lead of thread: 8mm
  • Material: Stainless steel lead screw, copper nut
  • Lead Screw Length: 295mm
  • Screw spacing: 2mm
  • Compatible with Prusa i3 3D Printer

Visit The Website For More Information…

Teenitor 10 Pcs 0.4mm Brass Mk8 Nozzle for For 1.75MM Filament MakerBot Replacement Print Head Extruder 3D Printer parts

Material: Brass
Color: Brass
Quantity: 10 pc
Length: 12mm
Screw thread: M6 x 1.0
Caliber: 0.4mm

Feature:
1.Mk8 nozzle represent improvement over previously used Mk7 nozzle. Mk8 has shorter length of extrusion channel than Mk7, which helps to extrude plastic with less force.
2.for MakerBot Mk8 0.4mm Replacement Nozzle for Replicator 1 & 2 Stepstruder.
3.This nozzle makes printing with PLA easier.

Package includes:
10 x Mk8 nozzle

Product Features

  • Material: Brass
  • Screw thread: M6 x 1.0
  • Caliber: 0.4mm
  • Quantity: 10 pc
  • Teenitor Brand Products.

Visit The Website For More Information…