1M Extension Cable Ideal For CREALITY 3D 3D Printer Upgrade Parts Extension Cable Kit for CR-10/10S/CR-10 400/CR-10 500 Series 3D Printer Extension Cable for Power Cords


Product description
For CREALITY 3D 3D Printer Parts Extension Cable Kit for CR-10/10S/CR-10 400/CR-10 500 Series 3D Printer  

Description: 
– 100% factory supply !!! 
– 100% brand new and of high quality. 
– Length of the Extension cable: about 1m / 3.28ft
– Net Weight: about 401g 

Package List:   
1 x extension cable kit for CR-10/10S/CR-10 400/CR-10 500 series 3D printer

Product Features

  • ★ For CREALITY 3D 3D Printer Parts Extension Cable Kit for CR-10/10S/CR-10 400/CR-10 500 Series 3D Printer  
  • ★ 100% factory supply !!! 
  • ★ 100% brand new and of high quality. 
  • ★ Length of the Extension cable: about 1m / 3.28ft
  • ★ Net Weight: about 401g 

Visit The Website For More Information…

OMNIHIL Replacement (15 FT) AC Cord + (15FT) 2.0 USB Cable for XYZprinting da Vinci 1.0 AiO All-in-One 3D Printer (Scan/Edit/Print)

High Quality 15 Foot Long AC Power Cord / High Quality PSU/Transformer / All products are tested to exceed/meet standard specification / OVP, OCP, SCP Protection (OVP: Over Voltage output Protection. OCP: Over Current output Protection. SCP: Short Circuit output Protection) / FREE SHIPPING BOTH WAYS / 2 YEAR FREE REPLACEMENT WARRANTY

Product Features

  • High Quality AC Power Cord
  • OVP, OCP, SCP Protection (OVP: Over Voltage output Protection. OCP: Over Current output Protection. SCP: Short Circuit output Protection)
  • FREE RETURN SHIPPING / 5 YEAR FREE REPLACEMENT WARRANTY
  • 3RD PARTY NON OEM PARTS

Detailed Information available on our Homepage…

WGCD 10 PCS Endstop Mechanical Limit Switch with Cable for 3D Printer RAMPS Prusa Mendel RepRap CNC Arduino Mega 2560

Specification:
Connections:
1, Red Line Connecting VCC (Ramps of +)
2, Connect the black wire GND (Ramps of -)
3, Green Line connection SIGNAL (Ramps in s)
Cable Type: 22 AWG
Cable Length: 70cm
Tips: Under normal circumstances, the system must be configured to at least three mechanical switches.

Package Csontent:
10 * Mechanical End Stop Endstop Limit Switch

Product Features

  • Mechanical endstop limit switches with 22AWG Cable for 3D Printer RAMPS 1.4 Makerbot Prusa Mendel RepRap CNC Arduino Mega 2560 1280.
  • Red line connecting VCC (ramps of +), Connect the black wire GND (ramps of -), Green Line connection SIGNAL (ramps in s)
  • Easy to install, common styles, replacement endstop for RAMPS 1.4, CNC and other 3D printer controllers.
  • Cable Length: 70cm/27.55inches
  • Package Content: 10 * Mechanical End Stop Endstop Limit Switch with Cable.

Visit The Website For More Information…

Widewing 5pcs 70cm 2 Pin Dupont Cable Male to Female Terminal Line 3D Printers Part

Features:
24AWG conductor is used to withstand 2A current and withstand 300V voltage.
The temperature range of the insulating layer can reach 80 degrees centigrade, and it is not easy to break and convenient to plug and pull.

Specifications:
Color: As picture shown
Type: Dupont Cable
Connector: Male to Female
Pin Quantity: 2
Length: approx. 70cm/27.55”
Quantity: 5pcs

Note:
Please allow 1-3 cm differs due to manual measurement.
Due to the different display and different light, the picture may not show the actual color of the item. Thanks for your understanding.

Product Features

  • 24AWG conductor is used to withstand 2A current and withstand 300V voltage.
  • The temperature range of the insulating layer can reach 80 degrees centigrade, and it is not easy to break and convenient to plug and pull.
  • Type: Dupont Cable
  • Connector: Male to Female
  • What’s You Get:5 x Dupont Cables

Visit The Website For More Information…

Homyl LCD Screen Controller Display with Cable For Creality CR-10S 3D Printer Parts

Description:

LCD smart controller for 3D printer.
Supports for RAMPS 1.4 control board.
Clear white characters with blue backlit, displays 4 lines and 20 characters per line.
Replacement screen for CR-10 3D Printer.
Comes with two connecting cables.

Specification:

Suitable for: Creality CR-10/10S
Product size: Approx. 94x90x25mm / 3.70×3.54×0.98inch

Package Includes:

1 Piece LCD Screen Display(with two Connection Cables)

Product Features

  • LCD smart controller for 3D printer.
  • Supports for RAMPS 1.4 control board.
  • Clear white characters with blue backlit, displays 4 lines and 20 characters per line.
  • Replacement screen for CR-10 3D Printer.
  • Comes with two connecting cables.

Visit The Website For More Information…