CCTREE 12V 40W 620 Ceramic Cartridge Heater and NTC Thermistor 100K 3950 for 3D Printer Creality CR-10 CR-10S S4 S5 Makerbot RepRap Prusa i3 (Pack of 10pcs)

Product description:

Cartridge Heater Description

Cartridge heaters is consist of a cylindrical stainless steel tube and thus provide a high corrosion prevention

The heating wire inside which is wound onto a ceramic core

The number of coils varies depending on the power, and provide a great uniform distribution of heat, which considerably increases the long life of the heater as well as prevents the oxidation of the heater wire even at high temperatures

The solids, liquids, and gases need to be heated by cartridge heater, transmit heat quickly by conduction if the producer of the heat (the cartridge) is in direct contact with the heat sink (any solid, liquid, or gas)

Widely used for manufacturing plastic and rubber parts in the car industry or in the food processing industry, etc

Package Included :
5*12V Cartridge Heater with 1m wiring
5* NTC 3950 100k thermistor

Product Features

  • Thermistor Color : white,Cartridge Heater Material: 304 Stainless Steel
  • Voltage: 12V. Power: 40W
  • Diameter: 6mm ; Length: 20mm
  • Conviniently pre-wired with 1 meter long high temperature teflon insulated wiring
  • Support for NTC 3950 is included in Marlin firmware, use TEMP_SENSOR 11 in firmware configuration

Visit The Website For More Information…

CCTREE 3D Printer Build Surface with 3M Sticker 3D Printer heated bed Sheet for Creality CR-10 CR-10S 300x300mm (Pack of 3)

Size:310mm x 310mm (12.2″x12.2″)
Background is made of 3M adhesive , easily stick on the heat bed platform


There are 2 methods to attaching the build surface on heatbed:

1. clamp the build surface to the print bed using binder clips(at least 3 clips)

2. Torn off 3M tape on back and stick it on heatbed.

Product Features

  • Size:310mm x 310mm (12.2″x12.2″)
  • Build sheet adheres to a print bed to help the filament stick during printing, while also enabling clean removal of the printed part afterward
  • Compatible with ABS, PLA, HIPS and other filament
  • Single sheet design installs more quickly and with fewer bubbles than tape or films
  • Durable construction allows for multiple uses with either the same or different filament material

Visit The Website For More Information…

CCTREE 15PCS 3D Printer Heating Block Cotton with Kapton Tape Hotend Nozzle Heat Insulation Cotton for Ultimaker/Makerbot/Creality CR-10

Material: cotton
Cotton Size: 70mm x 20mm x 2mm
Kapton:Width 6mm, Lenght:33M
Feature: heat preservation

Note: this product only suitable for 3D printer using indoors

Attention: Small parts, keep away from children

Package including:
15PCS x 2mm heating block cotton
1PCS x6mm Kapton Tape

1.3D printer replacement parts, Always shut off power to the circuit before starting installation work.
2.The surface temperature of the 3D printer might be high, and be careful not to touch the heating element to prevent injury.
3.3D printer initial operation, Do not run the equipment Unattended state.
4.When printing with a PLA(190°C-230°C) or ABS(230°C-250°C)consumable, if the temperature sensor and other accessories fail, it may cause high temperature hazards. Do not run the equipment Unattended state.
5.To ensure the users will use the product safely and properly, Please read your 3D printer manual first and follow the instructions step by step before using the product.
6.Due to the variety of possible end-uses, it is ultimately the responsibility of the customer to determine a product’s suitability for a particular application.

Product Features

  • Heat preservation, keep the printer heating evenly and work better
  • You can Punch Holes or Cut fit size to the cotton.
  • Recommend Safe Working Temperature : <300°C
  • Cotton Size: 70mm x 20mm x 2mm Kapton:Width 6mm, Lenght:33M
  • Package including:15PCS x 2mm heating block cotton + 1PCS x 6mm Kapton Tape

Visit The Website For More Information…

CCTREE 2.85mm (3mm) PLA 3D Printing Filament Material Accuracy +/- 0.05mm 1kg Spool (2.2lbs), Red

Welcome to CCTREE 3D Products Our engineered filament is here to help you stream your creative outlet, enabling you to see your thoughts and concepts engineered into a real and rewarding reality. The filaments are universally designed and compatible with 3D Printers using 2.85mm diameter filament, with a dimensional accuracy of +/- 0.05mm. 

PLA(Polylactic acid) is a environmentally friendly materials that can easy to be degradated and without smell. It is thermoplastic aliphatic polyester made of renewable resources like corn or starch. Its extrusion-temperature is much lower than ABS, and most often doesn’t require a heated bed. It is the ” default ” recommended material for many desktop 3D printers. It has the following characteristics:

• Good toughness high strength, high stiffness
• No block nozzle, good stick hot bed, a smooth PLA used
• Low shrinkage, thermoforming dimensional stability
•Accurate diameter: 2.85mm, variations + /-0.05mm, roundness +/-0.03mm

Product Features

  • 2.85mm diameter, 1kg net weight, PLA Filament
  • Spool Size:diameter 200mm + inner hub 55mm
  • PLA (Polylactic Acid) 3D Printing Filament Vacuumed Sealed With Desiccant
  • Print Temperature: 190 – 220°C, depending on printer model
  • Compatible with Makerbot,UP,Afinia,Leapfrog Creatr, Builder,Reprap,Felix, Ultimaker and any other FDM 3D printers

Check Out Our Website For Details…

CCTREE 3D Printer Nozzle Cleaning Kit Drill Bits Tool For Makerbot And Creality CR-10 MAKERBOT 10 PCS (0.2-0.6mm)

Size: 0.2mm,0.3mm,0.4mm,0.5mm,0.6mm
Type : Extruder Nozzle Drill
With storage box
Used for 3D Printer nozzle

Please clear the nozzle when heated to 200 °C while using the drill

Package Included:
10pcs x nozzle drill

Product Features

  • Material: Stainless Steel.
  • Size: 0.2mm,0.3mm,0.4mm,0.5mm,0.6mm
  • 5 different size (each size 2pcs)
  • Used for 3D Printer nozzle
  • Package Included: 10pcs x Nozzle Drill

Click Here If You Need More Detailed Info…