HICTOP 3D Printer Tools Kit 3D Printing Models Clean Up Kit and Removal Tool

Everything needed to print, maintain and clean up 3d model, and replace some parts of 3d printer.
Your knives always stay sharp with this 13 piece knife kit.
Package includes, 13 sharp blades, 3 handles and convenient storage case.
Great for 3D Print Clean-up & Arts and Crafts, change nozzle and removel models.
This kit has everything to make 3D printing easy and the printed results spectacular.

Package:
13pcs sharp blades
3pcs handles
2pcs removal tool
1pcs nozzle sleeve
1pcs pliers

Product Features

  • Quantity: 17-pcs tools with great quality and one year warranty.
  • Multifunction: all kinds of tools for 3d printing and model.
  • Function: This kit has everything to make 3D printing easy and the printed results spectacular.

Click Here If You Need More Detailed Info…

1 Roll 6″ inch WIDE 3D Printing Made In USA PRO Grade Blue Painters Tape Masking Clean Release Easy Removal NO RESIDUE (144MM x 55M 5.7 inch). 3D Printer bed grip deck cover 3D Prints Removal 60 Yd

3D printing enthusiasts will LOVE this tape! Cover your printer bed deck for easy removal of prints and replace tape easily as it wears. 3D printers do not come with good surfaces for easy print removal.

This Blue Painters Tape is Professional Grade multi-use Contractors tape featuring a specially formulated, high tack adhesive. Works for textured, semi-rough, or smooth surfaces and has the tackiness it needs to adhere to your surfaces yet allows for clean removal up to 21 days.

High performance masking tape is for general industrial, construction, and do-it-yourself use. The acrylic adhesive system will not dry out or lose holding power. Works well on drywall, glass, hardwood floors, wood trim, and a variety of surfaces. Most typical use is LATEX paint jobs and window protection mask off.

(REMOVE SLOWLY and carefully from freshly painted surfaces!)

Very Important: Surfaces must be well cleaned, dust free, greaseless, and very dry before application. While the backing of the tape is moisture resistant the adhesive is definitely not. ALL adhesive is pressure & heat sensitive. Make sure you press it firmly after application. Apply at room temperature or above if possible. The dryer and warmer the installation area, the more you run your fingers over it, the better the adhesion (less bleed). REMOVE ASAP! (always pull gently at slight angle AWAY from painted edge) Painters tape is known as semi-permanent removable, it gets stronger every day. The longer you leave it on the more difficulty removing it. Rolled or brushed paint jobs require much sooner removal than sprayed.

Blue Painters Tape is not for everything! May not play well with all types of oil based paints, lacquers, etc. You must be willing to experiment, there are 100’s of kinds of tape for a reason.

Other uses: 3D print bed masking or printer deck covering, Glue or Caulk lines, Over spray protection, Chrome protection when cutting or grinding.

Product Features

  • Premium #1 Grade USA MADE Product – Thicker paper, Stronger adhesive for Contractors & Pros
  • 6 Mil High Tack creped backing, 22.0 steel adhesion, 20 lb tensile strength, 9% elongation
  • UV Resistant for 10 days up to 150 degrees outdoors, 40-125 indoor range for 21 day clean removal
  • 3D Printer bed print surfaces – Strong, flexible, durable, versatile – broad range of applications
  • Dispenser friendly, Pulls off roll VERY quick without tearing, needs LESS pressure to stick down.

Click Here For More Information

iNSTONE Easier 3D Printer Kit With iNSTONE Slice Software TF Card Sample PLA Filament Clean Kit Desktop 3D Printer DIY Mini 3D Printer Online print WIN/MAC

The INSTONE Mini 3D Printer boasts a 4.3x 4.3 x 4.9 inch, no need to leveling print bed, and an auto-calibrating extruder module which ensures the user gets the best possible prints.

Software: iNSTONE 3D, Cura, Simplify 3D, etc.
Material: PLA
Accuracy: 0.1mm

Build volume: 4.3 x 4.3 x 4.9 inch
Package size: 9.85 x 9.85 x 14 inch
G.W.: 3.8kg

Packing List:
Mini 3D Printer *1
Bottom Plate *1
Consumable *1
Power Supply *1
Date Line *1
TF Card *1
Card Reader *1
Glue Stick *1

Guaranty:
1 year for printer; 6 months for motor

Note: Do not touch the nozzle when using! Hot!

Product Features

  • Creativity – iNSTONE Easier 3D Printer inspires your imagination and wake your inner art talent.
  • Easy Use – Mini 3D Printer Just needs by 6 steps you can make any items you want. All the operations can be done just with a knob.
  • Portable – Light weight 5.3(lb) make you can easily enjoy 3d Printer diy everywhere and anytime whatever you are doing: working, preparing paper even cooking.
  • Big discount on filament – You will get 40% off on our filament after you ordered iNSTONE 3D Printer Kit.
  • iNSTONE Quality Assurance/Technical Assistance – Live service every day||ready to answer all technical questions ||Follow us: Skype: instone 3D / Facebook: Instone 3D/ Youtube: Instone 3D

Click Here For More Information

1 Roll 5″ inch WIDE 3D Printing Made In USA PRO Grade Blue Painters Tape Masking Clean Release Easy Removal NO RESIDUE (120MM x 55M 4.7 inch). 3D Printer bed grip deck cover 3D Prints Removal 60 Yd

3D printing enthusiasts will LOVE this tape! Cover your printer bed deck for easy removal of prints and replace tape easily as it wears. 3D printers do not come with good surfaces for easy print removal.

This Blue Painters Tape is Professional Grade multi-use Contractors tape featuring a specially formulated, high tack adhesive. Works for textured, semi-rough, or smooth surfaces and has the tackiness it needs to adhere to your surfaces yet allows for clean removal up to 21 days.

High performance masking tape is for general industrial, construction, and do-it-yourself use. The acrylic adhesive system will not dry out or lose holding power. Works well on drywall, glass, hardwood floors, wood trim, and a variety of surfaces. Most typical use is LATEX paint jobs and window protection mask off.

(REMOVE SLOWLY and carefully from freshly painted surfaces!)

Very Important: Surfaces must be well cleaned, dust free, greaseless, and very dry before application. While the backing of the tape is moisture resistant the adhesive is definitely not. ALL adhesive is pressure & heat sensitive. Make sure you press it firmly after application. Apply at room temperature or above if possible. The dryer and warmer the installation area, the more you run your fingers over it, the better the adhesion (less bleed). REMOVE ASAP! (always pull gently at slight angle AWAY from painted edge) Painters tape is known as semi-permanent removable, it gets stronger every day. The longer you leave it on the more difficulty removing it. Rolled or brushed paint jobs require much sooner removal than sprayed.

Blue Painters Tape is not for everything! May not play well with all types of oil based paints, lacquers, etc. You must be willing to experiment, there are 100’s of kinds of tape for a reason.

Other uses: 3D print bed masking or printer deck covering, Glue or Caulk lines, Over spray protection, Chrome protection when cutting or grinding.

Product Features

  • Premium #1 Grade USA MADE Product – Thicker paper, Stronger adhesive for Contractors & Pros
  • 6 Mil High Tack creped backing, 22.0 steel adhesion, 20 lb tensile strength, 9% elongation
  • UV Resistant for 10 days up to 150 degrees outdoors, 40-125 indoor range for 21 day clean removal
  • 3D Printer bed print surfaces – Strong, flexible, durable, versatile – broad range of applications
  • Dispenser friendly, Pulls off roll VERY quick without tearing, needs LESS pressure to stick down.

Click Here For More Information

Printr Eases Dual Extrusion, Keeping the Process Clean & Efficient with 'Donut Wipe Towers'

printrDual extrusion has the potential to offer double the fun of single extrusion in 3D printing — but anyone who’s tried it can also attest that there’s also the potential for double the headaches. Often, in order to avoid common problems including color blending and blemishes and to encourage a clean print, users turn to ‘wipe towers’, where filament can be wiped off from the extruder in order to forestall accidental color blending or other messy issues. This hasn’t been a perfect solution — and it hasn’t been universal. Now, though, Amsterdam-based Printr is offering a new technology that can clean up prints using dual extrusion.

Their solution seems to be as intuitive to use as its name is fun to say, as Printr calls its solution a ‘Donut wipe tower’. While many wipe towers in use from other slicers are solid, Printr’s solution is, just as it sounds, donut-shaped. That is, a hollow structure, which is faster and more efficient to produce while still wiping excess filament from the extruder. Printr’s Formide platform, which integrates its Katana cloud slicing software, is said to be the first to enable this particular structure, which Printr assures us leads to “exceptionally clean dual prints.”

small_wipetower

“Due to its shape, the Donut wipe tower is much more efficient in time and material. As the extruder skips the middle part of the wipe tower and only prints the outline of the donut, it does not use as much filament compared to a regular wipe tower and thus, saves printing time. As the Donut wipe tower has a bigger base on the print bed, it is also much more stable than regular wipe towers and is thus less likely to accidentally tip over during printing,” the company explains in its latest press release.

dual_extrusionPrintr’s Donut wipe tower is additionally set to allow for additional customization and optimization in prints. Aware of the fact that extruders can begin to release filament prior to hitting the target temperature and beginning to print, Printr took inspiration from BCN’s Independent Dual Extruder (IDEX) trays for material leakage, ensuring that the Donut wipe tower’s hollow part is the setting for extruders to heat up — any filament released thus stays off the print bed and away from the desired print, keeping any unexpected messes in the Donut wipe tower. Further keeping the print bed safe from stray filament, the Donut wipe towers are designed to use a wider base than many users may have seen before. No tipping over here!

Settings for the Donut wipe tower — such as infill percentage — can also be user-specified, based on time and material considerations. Additionally, if a user is printing with two not-totally-compatible materials (Printr gives the example of PVA and PLA), two separate wipe towers can be set down, keeping each tower dedicated to one material.

On top of the user-generated settings, Katana is, as Printr reminds us, “designed to be smart” and so it will detect “whether the 3D model requires a complete wipe tower at the whole model or just part of it.”

“For example,” the company states, if you have a dual extrusion model and only need to print the bottom 40% of the model in dual colors, Katana will automatically detect this and stop the Donut wipe tower after the dual colored part has been printed. Moreover, if a 3D model contains a single color at the bottom and dual colors at the top, Katana will also automatically detect this and create the bottom of the wipe tower in a single color. This way no unnecessary extruder switching, and thus heating, is done.”

Printr has been keeping up with its mission of enhancing the 3D printing process since it was founded in 2014. With The Element, Katana, Formide, and now the Donut Wipe Towers, this Dutch company has certainly been busy ensuring that those at any stage of expertise in 3D printing have the tools they need to design and print successfully.

The company has also been working on tutorials, such as this one, to introduce users just getting started on their first print job. Discuss further in the Printr Cleans Up 3D Printing with Dual Extruders forum over at 3DPB.com.

[All images supplied to 3DPrint.com by Printr]