4″ in WIDE 3D Printing LOW TEMP Blue Painters Tape Masking Clean Release Easy Removal NO RESIDUE 3D Printer bed grip deck cover EZ Easy Print Removal 60 Yd 4″ Inch

3D printing enthusiasts will LOVE this tape! Cover your printer bed deck for easy removal of prints and replace tape easily as it wears. 3D printers do not come with good surfaces for easy print removal.

This Blue Painters Tape features a specially formulated, high tack adhesive. Works for textured, semi-rough, or smooth surfaces and has the tackiness it needs to adhere to your surfaces yet allows for clean removal up to 21 days. Heat from prints will greatly affect this however!

High performance masking tape is for general industrial, construction, and do-it-yourself use. The acrylic adhesive system will not dry out or lose holding power. Works well on drywall, glass, hardwood floors, wood trim, and a variety of surfaces. Most typical use is LATEX paint jobs and window protection mask off.

Very Important: Surfaces must be well cleaned, dust free, greaseless, and very dry before application. While the backing of the tape is moisture resistant the adhesive is definitely not. ALL adhesive is pressure & heat sensitive. Make sure you press it firmly after application. Apply at room temperature or above if possible. The dryer and warmer the installation area, the more you run your fingers over it, the better the adhesion (less bleed). REMOVE ASAP! (always pull gently at slight angle AWAY from painted edge) Painters tape is known as semi-permanent removable, it gets stronger every day. The longer you leave it on the more difficulty removing it. Rolled or brushed paint jobs require much sooner removal than sprayed.

Blue Painters Tape is not for everything! May not play well with all types of oil based paints, lacquers, etc. You must be willing to experiment, there are 100’s of kinds of tape for a reason.

Other uses: 3D print bed masking or printer deck covering, Glue or Caulk lines, Over spray protection, Chrome protection when cutting or grinding.

Product Features

  • Premium #1 Grade USA MADE Product – Thicker paper, Stronger adhesive for Contractors & Pros
  • 6 Mil High Tack creped backing, 22.0 steel adhesion, 20 lb tensile strength, 9% elongation
  • UV Resistant for 10 days up to 150 degrees outdoors, 40-125 indoor range for 21 day clean removal
  • 3D Printer bed print surfaces – Strong, flexible, durable, versatile – broad range of applications
  • Dispenser friendly, Pulls off roll VERY quick without tearing, needs LESS pressure to stick down.

Click Here For More Information

7″ inch WIDE 3D Printing Made In USA PRO Grade Blue Painters Tape Masking Clean Release Easy Removal NO RESIDUE (144MM x 55M 5.7 inch). 3D Printer bed grip deck cover 3D Prints Removal 60 Yd

3D printing enthusiasts will LOVE this tape! Cover your printer bed deck for easy removal of prints and replace tape easily as it wears. 3D printers do not come with good surfaces for easy print removal.

This Blue Painters Tape is Professional Grade multi-use Contractors tape featuring a specially formulated, high tack adhesive. Works for textured, semi-rough, or smooth surfaces and has the tackiness it needs to adhere to your surfaces yet allows for clean removal up to 21 days.

High performance masking tape is for general industrial, construction, and do-it-yourself use. The acrylic adhesive system will not dry out or lose holding power. Works well on drywall, glass, hardwood floors, wood trim, and a variety of surfaces. Most typical use is LATEX paint jobs and window protection mask off.

(REMOVE SLOWLY and carefully from freshly painted surfaces!)

Very Important: Surfaces must be well cleaned, dust free, greaseless, and dry before application. While the backing of the tape is moisture resistant the adhesive is not. Adhesive is pressure & heat sensitive. Make sure you press it firmly after application. Apply at room temperature or above if possible. The dryer and warmer the installation area, the more firmly pressure is applied, the better the adhesion (less bleed). Remove upon completion! (always pull gently at slight angle AWAY from painted edge) Painters tape is known as semi-permanent removable, it gets stronger every day. The longer you leave it on the more difficulty removing it. Rolled or brushed paint jobs require much sooner removal than sprayed.

Blue Painters Tape is not for everything! May not play well with all types of oil based paints, lacquers, etc. You must be willing to experiment, there are 100’s of kinds of tape for a reason.

Other uses: 3D print bed masking or printer deck covering, Glue or Caulk lines, Over spray protection, Chrome protection when cutting or grinding.

Product Features

  • Premium #1 Grade USA MADE Product – Thicker paper, Stronger adhesive for Contractors & Pros
  • 6 Mil High Tack creped backing, 22.0 steel adhesion, 20 lb tensile strength, 9% elongation
  • UV Resistant for 10 days up to 150 degrees outdoors, 40-125 indoor range for 21 day clean removal
  • 3D Printer bed print surfaces – Strong, flexible, durable, versatile – broad range of applications
  • Dispenser friendly, Pulls off roll VERY quick without tearing, needs LESS pressure to stick down.

Click Here For More Information

fosa 3D Printer Part 241815mm Silicone Shock Cover, Blue Heater Block Protective Cover Case for 3D Printer Part V6 PT100

Description:
This protective cover is specially designed for V6 PT100 aluminum block to ensure the heater block clean and keep temperature stability. Silicone material has great property of heat resistance and extensibility.

Specifications:
Condition: 100% Brand New
Material: Silicone
Color: Blue
Fit For: V6 PT100 Aluminum Block
Outer Size: approx. 2.5 x 2 x 1.5cm / 1.0 x 0.8 x 0.6in
Weight: approx. 4g

Package Included:
1 x Silicone Case(Aluminum Block not included)

Product Features

  • It adopts silicone material, it features high temperature resistance and non-stick
  • Efficiently keep your heater block clean
  • Helps to keep the hot end temperature extremely stable
  • The silicone cover will fit the hot end snugly because of the extensibility of silicone when hot
  • Well designed for protection and accessibility due to its reserved notches

Visit The Website For More Information…

CCTREE 3D Printer Heater Block Silicone Cover MK7/MK8/MK9 Hotend For Creality CR-10,10S,S4,S5 Anet A8

Materil:Silicone

Color: coffee

Item Weight: 2g

Item Size: 22 x 22 x 15mm/ 0.66 * 0.66 * 0.6in (approx.)

Package List:
3 x Silicone Cover

Product Features

  • Made of non-stick silicone material
  • Helps to keep the hotend temperature extremely stable.
  • Can extend the life of the heater block and extruder by keeping it cleaner.
  • High temperature resistance: 280℃.
  • Professional for 3D printer extruder.

Detailed Information available on our Homepage…

2PCS Silicone Case Cover Sock Shell for MK10 Aluminum Block 3D Printer Part Hot End

Features 
1.Suitable For MK10 Hot End Covers 3D printer part. These cases will keep your nozzle clean and free of burnt on blackened plastic. These also offer a huge boost in temperature stability, particularly if you use high airflow cooling around the nozzle to cool the print.
2.These silicone case really helps with sticky materials like Co-Polyesters and filled materials that like to build up on nozzles
3.Well designed for protection and accessibility due to its reserved notches.
4.Helps to keep the hot end temperature extremely stable
5.The silicone cover will fit the hot end snugly because of the extensibility of silicone when hot.

Specifications
Material: Silica gel
Color:Pink,brown

note 
1. Manual measuring, please allow 1 ~ 3 mm error
2. Due to the difference between different monitors, the picture may not reflect the actual color of the item. We guarantee the style is the same as shown in the pictures. Please understand
Package Including
2 x Silicone Case (Aluminum Block Not Included)

Product Features

  • This protective cover is specially designed for MK10 heat block to keep it clean and help temperature stability.
  • 2.These silicone case really helps with sticky materials like Co-Polyesters and filled materials that like to build up on nozzles
  • 3.Color: Pink,brown
  • 4.Helps to keep the hot end temperature extremely stable
  • 5.2 x Silicone Case (Aluminum Block Not Included)

Visit The Website For More Information…