CCTREE 12V 40W 620 Ceramic Cartridge Heater and NTC Thermistor 100K 3950 for 3D Printer Creality CR-10 CR-10S S4 S5 Makerbot RepRap Prusa i3 (Pack of 10pcs)

Product description:

Cartridge Heater Description

Cartridge heaters is consist of a cylindrical stainless steel tube and thus provide a high corrosion prevention

The heating wire inside which is wound onto a ceramic core

The number of coils varies depending on the power, and provide a great uniform distribution of heat, which considerably increases the long life of the heater as well as prevents the oxidation of the heater wire even at high temperatures

The solids, liquids, and gases need to be heated by cartridge heater, transmit heat quickly by conduction if the producer of the heat (the cartridge) is in direct contact with the heat sink (any solid, liquid, or gas)

Widely used for manufacturing plastic and rubber parts in the car industry or in the food processing industry, etc

Package Included :
5*12V Cartridge Heater with 1m wiring
5* NTC 3950 100k thermistor

Product Features

  • Thermistor Color : white,Cartridge Heater Material: 304 Stainless Steel
  • Voltage: 12V. Power: 40W
  • Diameter: 6mm ; Length: 20mm
  • Conviniently pre-wired with 1 meter long high temperature teflon insulated wiring
  • Support for NTC 3950 is included in Marlin firmware, use TEMP_SENSOR 11 in firmware configuration

Visit The Website For More Information…

CCTREE 3D Printer Build Surface with 3M Sticker 3D Printer heated bed Sheet for Creality CR-10 CR-10S 300x300mm (Pack of 3)

Size:310mm x 310mm (12.2″x12.2″)
Background is made of 3M adhesive , easily stick on the heat bed platform


There are 2 methods to attaching the build surface on heatbed:

1. clamp the build surface to the print bed using binder clips(at least 3 clips)

2. Torn off 3M tape on back and stick it on heatbed.

Product Features

  • Size:310mm x 310mm (12.2″x12.2″)
  • Build sheet adheres to a print bed to help the filament stick during printing, while also enabling clean removal of the printed part afterward
  • Compatible with ABS, PLA, HIPS and other filament
  • Single sheet design installs more quickly and with fewer bubbles than tape or films
  • Durable construction allows for multiple uses with either the same or different filament material

Visit The Website For More Information…

Creality Aluminum MK8 Extruder Drive Feed for CR-10 CR-10S 3D Printer Part by Luxnwatts

Welcome to order from Luxnwatts for Creality 3D Printer Parts

Package List:
Mounting screws
Aluminum MK8 extruder frame, with bored intake hole
Brass extruder drive gear
35 mm long Teflon intake guide. (keeps filament away from Z-screw rod)
Special Bowden tube fitting (improved over stock)
For all 1.75 mm filament

Notice: Please feel free to contact us if you have any questions or problem for our products, we will reply you within 24 hours, thank you

Product Features

  • This is Creality Original Part for CR-10/CR-10S S4 S5 3D Printer
  • It is Aluminum Replacement MK8 Extruder Drive Feed Kit
  • Well Package With Fast Delivery

Visit The Website For More Information…

Athorbot 3D Printing Build Surface, Black (Pack of 3) (310mm X 310mm) for CR-10 CR-10S 3D printer

Size: 310x310mm
Color: Black
Maxmum temperature: 200℃
Package content: 3x printing build surface
Package size:37.6×34.4×0.4cm
Package weight:0.37kg

Product Features

  • 1.Excellent adhesion: easy to install and no bubbles, print adheres well
  • 2.Easy to take off: take off easily and cleanly
  • 3.Great durability: can be used for many times of cycle print
  • 4.Work on many surface: apply to many 3d filament types printing, such as PLA, ABS and so on
  • 5.Withstand high temperature: resistant to high temperatures making it perfect for the filaments requiring heated build beds such as ABS

Detailed Information available on our Homepage…

HICTOP CR-10S 3D Printer Filament Monitor Prusa I3 Upgrade Dual Z axis T Screw Rods 300x300x400mm

HICTOP CR-10S 3D Printer Filament Monitor Prusa I3 Upgrade Dual Z axis T Screw Rods 300x300x400mm

The difference bettwen CR-10 and CR-10S is CR-10S upgraded with dual Z axies leading screw rod which make printing quality better and more stable.
Another upgrading is CR-10S mainboard with filament monitor function, this function can detect when filament is running out or not.

Product Parameter:
Printing Size: 300*300*400mm
Printing accuracy:±0.1mm
Layer thickness: 0.05-0.4mm (adjustable)
Nozzle temp: 250 degree
Extruder temperature: PLA: 210
Hot bed temperature: PLA: 50
Printing Speed:Normal: 80mm/s, Max.: 200mm/s
Materials:1.75mm PLA
Working condition temp: 10-30℃, Humidity:20-50%
Nozzle: 0.4mm, 0.3mm, 0.2mm

Extruder quantity: 1
Molding: FDM
Body Structure: Imported V-Slot Aluminum Bearings
Nozzle Diameter:Standard 0.4mm
Printing Method: SD card(off-line), contact to the PC(online)
LCD screen: 3 inch LCD screen with aircraft knob
Power supply: input: 110-240V output: 12V/30a
Hot bed: 4mm aluminum alloy platform, 3mm special tempered glass
Operating Software:CURA、Repetier-Host simplify 3D
Software supporting: PROE, Solid-works, UG, 3d Max, Rhino 3D design software, etc.
Cura language: English
Interface language: English
Format : STL, G-Code
Operating System: Linux, Windows, OSX
High accuracy bearings and quality parts, it makes the printer much more stable and quiet when printing.

Packing details:
Product Size: 490*600*615mm
Package Size: 540*640*310 mm
Net Weight: 11kg
Gross Weight: 15kg

Package content:
*HICTOP 3D printer DIY kits (including build plate and tempered glass)
*Dual Z axis
*Filament monitor
*Spare screws and Wrench kits
*Assembly instructions and user manual.
*SD card 1pcs (the user manual is in SD card)
*0.2kg PLA Filament

Product Features

  • UPGRADE: CR-10S updated with dual Z axies leading screw rod which make printing quality better and more stable, with different mainboard and firmware from CR-10.
  • RESUME PRINTS: CR-10S has the ability to resume prints even after a power outage or lapse occurs.
  • FILAMENT MONITOR: CR-10S mainboard with filament alarming function, this function can detective if filament is running out or not.
  • PRINTING SIZE: Prints max size of 300X300X400mm. No longer will you be limited to small models.
  • EASY ASSEMBLY: Delivery with three sets, just need about 10 minutes to assemble well.

Click Here For More Information