Kweiny Heat Insulation Cotton and PTFE High Temp Tape for 3D Printer Makerbot Hotend Heater Block | 10PCS Cotton and A Roll of Tape for Extruder Parts Tool Kit

Notice:
1. After replace the nozzle, Please recalibrate the distance between nozzle and build plate to ensure the quality of print parts;
2. Please do not use flame to test their heat resistance, because the flame’s temperature is much higher than 300 degrees Celsius (572 Fahrenheit ).

Size:
Heat insulation cotton: Length 80mm/3.15in, width 20mm/0.78in, thickness 2mm;
PTFE high temp tape: Total length 10m/32.8ft, width 8mm, thickness 0.13mm

package including:
10PCS heat insulation cotton;
One Roll of PTFE High Temp Tape

Product Features

  • Compatibility: Matches all 3D print extruder heater block offered from E3D Makerbot, MK8 Makerbot RepRap , etc.
  • High temperature resistance: Both PTFE tape and heat insulation cotton, short term resistance to temperature 260 degrees Celsius (500 Fahrenheit ), long term resistance to temperature 300 degrees Celsius (572 Fahrenheit )
  • Function: Keep heater block temperature constant, so that improving the quality of the printed matter, save electricity and prolong the service life of heater and temp sensor
  • Use-method: You can cut cotton into the right size and hole according to your needs, then stick it firmly with PTFE tape. 5 sides of heater can be wrapped up in cotton, except the surface installed heater wire, but you just need to use 1 piece cotton. You can also use PTFE tape to stick any other parts on your 3D printer
  • Material: The heating insulation cotton is made from heat resistant ceramic fiber, the tape is made from PTFE

Visit The Website For More Information…

Wangdd22 15pc/set 1.75mm Teflon Throat Tube+0.4mm Extruder Nozzle Print Heads+Heater Blocks Hotend for MK8 Makerbot Anet A8 3D Printer

Descriptions:
Specification of Brass Nozzle:
Type:0.4mm Extruder Brass Nozzle Print Head
Color:Golden.
Material:Brass
Size:5*13mm
Input Diameter:1.75mm
Output Diameter:0.4mm

Specification of Extruder Tube:
Type:Nozzle Throat
Compatibility:3D Printer
Outer Thread:M6
Nozzle Throat Outer Diameter:7mm
Nozzle Throat Inner Diameter:4mm
Length:30mm
Filament Diameter:1.75mm
Material:Stainless Steel

Specification of Heater Blocks Hotend:
Name:Metal Part
Color:Silver
Specification:20*20*10mm

Package list:
15 piece/set ( 1.75mm Teflon Throat Tubex5pcs,nozzle 0.4mmx5pcs,Heater Blocks Heating Hotendx5pcs)

Product Features

  • Pack of 5 x 3D Printer Extruder Hotend 30mm Length 1.75mm Nozzle Inputting Tube( for MK8 Makerbot Reprap Prusa I3 3D Printer) and 5 x 3D Printer 0.4mm Extruder Brass Nozzle Print Head.
  • Nozzle Throat: Outer Thread – M6; Inner Diameter – 2mm; Length – 30mm; Filament Diameter – 1.75mm; Material – Stainless Steel.
  • 0.4mm Extruder Brass Nozzle Print Head: Color – Golden; Material – copper (brass); Size – 5*13mm; Input Diameter: 1.75mm; Output Diameter: 0.4mm.
  • Compatibility: compatible with all 1.75mm PLA ABS 3D Printer
  • Quanlity:15pcs/lot (5 piece 1.75mm Nozzle Inputting Tube,5 piece 3D Printer 0.4mm Extruder Brass Nozzle Print Head,5 piece Heater Blocks Hotend)

Visit The Website For More Information…

EAONE 18 Pcs 3D Printer Nozzles M6 Extruder Brass Nozzle Print Head (2×0.2mm+2×0.3mm+6×0.4mm+2×0.5mm+2×0.6mm+2×0.8mm+2×1.0mm) for MK8 Makerbot


EAONE 18 Pcs 3D Printer Nozzles M6 Extruder Brass Nozzle Print Head (2*0.2mm+2*0.3mm+6*0.4mm+2*0.5mm+2*0.6mm+2*0.8mm+2*1.0mm) for MK8 Makerbot

Specification of Brass Nozzle:
Type: Extruder Brass Nozzle Print Head
Color: golden
Material: brass
Input diameter: 1.75mm
Output diameter: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm

Attention: Small parts, keep away from children

package including:
2x 0.2mm Nozzle Print Head
2x 0.3mm Nozzle Print Head
6x 0.4mm Nozzle Print Head
2x 0.5mm Nozzle Print Head
2x 0.6mm Nozzle Print Head
2x 0.8mm Nozzle Print Head
2x 1.0mm Nozzle Print Head

Product Features

  • Package include: 18 pieces M6 3D Printer nozzles for MK8 Makerbot, 2 x 0.2mm, 2 x 0.3mm, 6 x 0.4mm, 2 x 0.5mm, 2 x 0.6mm, 2 x 0.8mm, 2 x 1.0mm
  • Diameter: input diameter: 1.75mm; output diameter: 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm
  • Compatibility: compatible with all 1.75mm pla abs printer
  • Material: brass
  • Installation: external M6 thread connection

Click Here For More Information

AUSTOR 3D Printer Tool Kit – 6pcs Extruder 1.75MM Tube, 6pcs 0.4MM Brass Extruder Nozzle Print Heads, 2M PTFE Teflon Tube(2.0mm ID/4.0mm OD) for E3D V6 Makerbot (Bonus: 3pcs Cleaning Drill Bits)


AUSTOR 3D Printer Tool Kit

Specific parameter

Nozzle throat: outer thread: M6; outer diameter: 6mm; inner diameter: 4mm; teflon pipe inner diameter: 2mm; length: 22.5mm; filament diameter: 1.75mm; material: stainless steel.
Brass nozzle: output diameter: 0.4mm; input diameter: 1.75mm; size: 5*13mm; material: brass; color: golden.
PTFE teflon tube: material: PTFE (Poly Tetra Fluoro Ethylene); density: 2.15-2.20g/cm3; heat resistance: up to 260℃; outside diameter: 4mm; inside diameter: 2mm; color: white; length: 2m.
Cleaning drill kit: bit diameter: 0.4mm; bit length: 8mm; length of shank: 20mm; handle material: silicone.

Compatibility
Compatible with all 1.75mm E3D V6 Makerbot 3D printer.

NOTE: small parts, please keep away from baby child.

package including:
6 x 3D Printer nozzle throat
6 x 3D Printer extruder brass nozzle
1 x 2M PTFE teflon tube(2.0mm ID/4.0mm OD)
3 x cleaning drill bits

Product Warranty

Austor Direct Customer Service Team is dedicated to offering our valued customers a great and professional services – Timely email reply, Helpful solutions, Refund & Return Warranty.

All Austor products supply 45 days money-back & 18-month warranty. Any questions you have, please don’t hesitate to contact us. We will get you back within 24hours.

Product Features

  • Package include: 6pcs 3D Printer nozzle throats + 6pcs nozzle print heads + 2M PTFE teflon tube(2.0mm ID/4.0mm OD) + 3pcs cleaning drill bits
  • Compatibility: compatible with all 1.75mm E3D V6 Makerbot 3D printer
  • Nozzle throat: material: stainless steel; outer thread: M6; inner diameter: 2mm; length: 22.5mm; filament diameter: 1.75mm
  • Extruder brass nozzle: material: copper(brass); size: 5*13mm; output diameter: 0.4mm; input diameter: 1.75mm; color: golden
  • PTFE teflon tube: material: PTFE(Poly Tetra Fluoro Ethylene); length: 2m; outside diameter: 4mm; inside diameter: 2mm; density: 2.15-2.20g/cm3

Click Here If You Need More Detailed Info…

Wangdd22 3D Printer Accessories 4pcs/lot 38 Tooth Mold Steel Linear Extruder Filament Drive Gear for Planetary Gear Extruder

Specifications:

Inner diameter: 5mm
Outer diameter: 10.8mm
Height: 12mm
Teeth: 38 teeth

Mounting holes: M3

Shipping list:
4pcs 38 Tooth Mold Steel Linear

Product Features

  • 100%brand and new
  • CNC wire cutting.
  • Durable wear resistant.
  • Mold steel gear is a high-quality gear that have better effect than the brass ones.

Detailed Information available on our Homepage…