[sg_popup id=1]

Ifun 3D Printer Filament Carbon Fiber which Compatible with Major 3D Printers 1.75 mm 1KG(2.2LB) Black Premium raw Material Top Dimensional Accuracy for Your Advanced 3D Printing Requirements

Parameter:

Printing recommendation:typical ranger

Extrude temperature:220-240℃

Printing speed:40-100mm/s

Bed temperature:60-100℃

Diameter:1.75mm

Nozzle: we currently recommend minimum 0.4mm

Weight:1KG

Gross weight:1.4KG

Density:1.29g/

Glass transition temperature:60℃

Melt index:4.5g/10min

Tensile strength:31.2Mpa

Elongation at break:6.3%

Bending strength:40.2Mpa

Bending modulus:2200Mpa

Izod impact notched:5.5KJ/ M

Heat distortion temperature:57℃

Flammability:HB class

Layer Height:0.1-0.2mm

Infill: As needed up to 100%

Matters need attention:General printing.

Product Features

  • The raw materials of carbon fiber are imported from Japan Toray corporation.Premium quality raw material.Good flexibility and Better physical performance than usual ABS or PLA filament, High stiffness and toughness and Surface durability.
  • Because of the carbon fiber composition, the strength of the material is greatly enhanced, The physical properties of the 3D filament are much better than those of ABS or PLA. It can meet the demand of industrial use with the 3D printing filament.
  • Low shrinkage and Excellent dimensional stability. stable melting point and low brittleness.
  • While enhancing the performance of material, we take into account the requirements of environmental protection.
  • High resolution and the tolerance could been controled in 0.03 mm, It is stable and smooth.

Check Out Our Website For Details…

Exterior Accessories – 200x20cm Diy 3d Carbon Fiber Vinyl Wrap Roll Film Sticker Car Home Decal Sheet – Carbon Fiber Vinyl Wrap 3m Black White Roof 5d – 3d – 1PCs

Specification:
Color: Silver, White, Black, Red, Orange, Green, Pink, Gray
Size:200x20cm / 78.7″x 7.9″
Features:
-Self adhesive stickers
-Long lasting, flexble and durable.
-High temperature & water Proof
-Easily cleansed with water.
-Fashion and decoration, unique and attractive.
-Resistant to UV, water, dirt, grease, salt, mild acid and oil.
-Carbon fiber vinyl can be re-lifted, repositioned and stretched with heat gun.
-Can be applied on the interior and exterior surface of car or motocycle as u like to protect the car.
Installation:
Need sharp utility or xacto style knife,squeegee, blow dryer, or heat gun to install. You can cut the shape you like.
Fitment:
Common use,fit for car used, motorcycle parts,such as roofs, hoods, trunk lids, wing covers, bumper.
You also use on mobile phone, laptop, furniture window molding etc.
Please note tools are not included.
Package includes:
1 x 200x20cm Carbon Fiber Vinyl Sticker

Product Features

  • 80 % ORDERS ARRIVE IN 7-12 BINESS DAYS
  • Vynil wrap carbon fiber vinyl texture vietnam hard sheets wallet hood wallpaper roll sticker interior brh tape
  • Carbon fiber vinyl wrap hood interior laptop wood gloss 1080 dinoc vynal fibre vynil water filter window tint vvivid blue headlight grey marble black roll matte white chameleon wraps cars tool wrapping boat film chrome adhesive
  • Vinyl wrap tools roll tool cars knife squeegee white gloves black carbon fiber matte flat motorcycle film blue pink filament sheet sticker decal sheets chameleon body printer roof screen protector racer rear wings brh fabric gloss colored cleaner cutter cutting color rojo vintage purse dress ring overalls leather belt circles levis pantry sign

Detailed Information available on our Homepage…

Ifun 3D printing filament Carbon Fiber which compatible with all major 3D printers 1.75 mm 1KG(2.2LB) black -Quality raw material- Top Dimensional Accuracy +/-0.03 mm for your wonderful masterpiece

Parameter:

Printing recommendation:typical ranger

Extrude temperature:220-240℃

Printing speed:40-100mm/s

Bed temperature:60-100℃

Diameter:1.75mm

Nozzle: we currently recommend minimum 0.4mm

Weight:1KG

Gross weight:1.4KG

Density:1.29g/

Glass transition temperature:60℃

Melt index:4.5g/10min

Tensile strength:31.2Mpa

Elongation at break:6.3%

Bending strength:40.2Mpa

Bending modulus:2200Mpa

Izod impact notched:5.5KJ/ M

Heat distortion temperature:57℃

Flammability:HB class

Layer Height:0.1-0.2mm

Infill: As needed up to 100%

Matters need attention:General printing.

Product Features

  • The raw materials of carbon fiber are imported from Japan Toray corporation.Premium quality raw material.Good flexibility and Better physical performance than usual ABS or PLA filament, High stiffness and toughness and Surface durability.
  • Because of the carbon fiber composition, the strength of the material is greatly enhanced, The physical properties of the 3D filament are much better than those of ABS or PLA.
  • Low shrinkage and Excellent dimensional stability. stable melting point and low brittleness.
  • Environment friendly and biodegradable.
  • High resolution and the tolerance could been controled in 0.03 mm, It is stable and smooth.

Check Out Our Website For Details…

Hackka 1.75mm 1KG Fine Grain Carbon Fiber Reinforced PLA 3D Printing Filament

  • This carbon fiber reinforced PLA has very fine grain, and would not clog on regular size nozzles.
  • Diameter: 1.75mm (±0.02)
  • Weight: Approx. 2.2lb (1kg)
  • Nozzle: At least 0.4mm

Product Features

  • Fine grain formula carbon fiber; this PLA would not clog on regular size printing nozzles.
  • Compatible with all 3D printers.
  • Carbon Fiber Reinforced PLA filament offers more stiffness compared to regular PLA.
  • Printing Temperature: 200-230 degree Celsius. 215 degree Celsius recommended.
  • Carbon Fiber Reinforced PLA have different characteristics than regular PLA. Their output has a less smooth surface and they also have a matte finish.

Check Out Our Website For Details…

Filament Innovations 2016 Carbon Fiber High Modulus ABS Hybrid Filament 3D Printer 1.75mm – 0.8KG

Filament Innovations 2016 Carbon Fiber ABS Hybrid filament is a continuation of our 2015 formula. As a company who listens to our customers and treats them like family, we listened to you on this filament. And the consensus was “How can you make it print better on my stock .4mm nozzle?” Well, we tried lots of things and what works was adding just a sprinkle of PLA into the mixture! And just like that, our hybrid ABS formula was born. This prints better on a stock .4mm nozzle and for all intensive purposes, is still the ABS based Carbon Fiber filament you are looking for. This filament is now made from 20% Carbon Fiber, 72% ABS, and 8% PLA – by weight. High Modulus Carbon Fiber strands are combined with industry leading, virgin ABS and PLA material and extruded into 1.75mm filament; you are sure to love this filament! Officially founded in October 2015, Filament Innovations is an open-source 3D Printing company located in the heart of historic Bethlehem, PA. We have contracted with a manufacturing company to have our filaments produced for us. All filaments are shipped vacuum sealed with added desiccant to ensure long shelf-life and freshness. 3D Printing is what we do. Buy your filament from a real 3D Printing company!

Product Features

  • 20% High Modulus Carbon Fiber, 72% ABS, and 8% PLA
  • .4mm Nozzle or Larger Required – .5mm Recommended
  • Extruder 220C-240C
  • Heated Bed: 100C-110C
  • Professionally Extruded with +/- .05mm Diameter Tolerance

Check Out Our Website For Details…