TIANSE Wood 3D Printer Filament 1.75mm 1KG Spool Filament for 3D Printing, Dimensional Accuracy +/- 0.03 mm

Product Features

  • Material: Wood-Pla Composite – Color: Wood (25%-30% wood fill)
  • Weight: 1 KG (approximately 2.20 lbs) Spool
  • 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm)
  • Wood 3D Printer Filament Vacuumed Sealed With Desiccant
  • 100% Satisfaction Guarantee: 2-Year Warranty and 24*7 customer support with technical advice

Check Out Our Website For Details…

Polymaker PolyPlus PLA 3D Printer Filament, PLA Filament, True Grey, 1.75 mm, 750g


Specifics and Printing Conditions

Color: True Grey

Diameter (Tolerance): 1.75 mm ±0.05 mm

Net Weight: 750g

Recommended Printing Temp: 195 – 230 °C

Recommended Printing Speed: 40 – 90 mm/s

Heated Bed: Not required but can be used (up to 60 °C)

All PolyPlus PLA filaments have been properly dried before packaging and shipping. It is recommended that the filament, when not used, be stored in the provided resealable bag with the desiccant pack to minimize moisture absorption and to ensure the best printing performance.

About Polymaker

Polymaker is a ISO9001:2008 certified, 3D printing innovation company dedicated to enabling a better future with 3D printing. We achieve this goal by integrating advanced materials, additive manufacturing technologies, and design to meet the needs of today’s industries and consumers.

Product Features

  • A 1.75 mm PLA based filament compatible with Makerbot, FlashForge,Monoprice,XYZprinting,ALUNAR and other desktop 3D printers
  • PolyPlus PLA is compliance with RoSH,REACH,PAHs and produced exclusively using NatureWorks’Ingeo PLA resin
  • Polymaker patented Jam-Free technology which dramatically improves the heat stability of PLA filament by raising the softening temperature, ensuring a jam-free 3D printing experience.
  • Works well with all common printing surfaces such as the blue tape, Kapton tape, glass, BuildTak, etc. No heated bed or 3D printer chamber required but can be used (up to 60°C)
  • On line support: any questions or problems please leave us a message. A Polymaker engineer will get back to you within 24 hours. Polymaker has worldwide distribution centers located in Europe and North America. All Polymaker filaments are researched, developed and manufactured in house at Polymaker’s Headquarters in China.

Check Out Our Website For Details…

Armadillo Nylon Alternative 3D Printing Filament – 3mm .5kg – SNOW

Tired of fragile 3D printed parts? Armadillo 3D printing filament is a perfect alternative to some of the most common rigid materials on the market. Armadillo filament is a high performing rigid material, providing 90% higher abrasion resistance than nylon materials. Its toughness ratings are superior to commonly used materials, 86 times greater than that of ABS. It is an excellent material to use for bridging, with virtually no warping issues. When you need a rigid product that can withstand wear and tear, the Armadillo resistance to fracturing makes it a perfect replacement. Suggested Applications: braces, fasteners, gears and protective covers. KEY FEATURES: Abrasion resistance 84% better than PLA and 60% better than ABS Chemical resistance to many materials, including naphtha, ASTM Oils #1-3, petroleum and Freon Consistent diameter and material properties providing reliable, high quality prints No heated bed required. Build platform requires same prep as PLA PRINTING GUIDELINES: Extruder Temperature:  220°C – 230°C Platform Temperature: Room temperature – 45°C Glue or blue painters tape is suggested if not using a heated bed. Print Speed:  Top and bottom layers: 15-20 mm/ sec (900-1800 mm/ min) Infill speeds: 45-60 mm/ sec (2700-3600 mm/ min) Layer 2+ use cooling fan if available.

Product Features

  • The toughness of a nylon with enhanced tensile strength
  • Excellent bridging capabilities and virtually no warping
  • Shore Hardness = 75D
  • Suggested Applications: braces, fasteners, gears and protective covers

Check Out Our Website For Details…

eSUN 1.75mm Black PLA PRO (PLA+) 3D Printer Filament 1KG Spool (2.2lbs), Black

eSUN 3D Printer Filament: PLA PRO (PLA+)

Color: Black

Extrusion Temperature Range: 205 to 225

PLA PRO(PLA+) Advantages:

Superb layer bonding
High rigidity. Good glossiness.
Several times tougher than PLA
Smoother finished printouts.
No cracking or brittle problem.
Prints are hard to break.

PLA PRO(PLA+) print temperature is about 20 Celsius higher than regular PLA. Most users print at around 210 to 215 Celsius. Other settings are about the same.

INTSERVO is dedicated to customer satisfaction. Customers are always welcome to contact us for any questions and/or support needs.

Product Features

  • 1KG net (approximately 2.2 lbs) Filament with Clear Spool
  • eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA.
  • 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm)
  • Recommended Extrusion/Nozzle Temperature 205C – 225C
  • Spool Diameter: 8″ – Spool Width: 2.50″ – Spool Hub Hole Diameter: 2.05″ – Inner Circle Diameter: 3.5″

Click Here For More Information

Gizmo Dorks 1.75mm HIPS Filament 1kg / 2.2lb for 3D Printers, White

Gizmo Dorks
We provide the highest quality 3D printing materials such as ABS, PLA, HIPS, PVA, and more. Our filaments are run with tight tolerances. There are no air bubbles or oily residues. Every filament comes loaded on a durable, hard plastic spool, not a cheap, flimsy cardboard spool.

HIPS, High Impact Polystyrene, is very similar to ABS. They share a lot of the same characteristics and qualities. However, HIPS is used with different solvents versus ABS. Limonene is used with HIPS instead of Acetone for ABS. Since Limonene does not affect ABS, HIPS is commonly used as a supporting material. HIPS is versatile, economical, and impact resistant.

Compatible with RepRap, Makerbot, UP!, Lulzbot, Afinia, Solidoodle, MakerGear, Printrbot LC, and more!

FAQ?
Is the spindle hole large enough to fit my Makerbot printer?
Yes! Our spindle holes are large enough to fit the Makerbot printers. You don’t have to worry about fabricating a spindle extension any longer. *NOTE, these spools will not fit inside of the new Makerbot 5th generation printer drawers. You can still use these spools and feed the filament directly through the top of the printer.

What are some printing tips?
Please use Kapton tape or 3M blue tape. Please use in well ventilated areas.

What other colors are available?
HIPS comes in a variety of different vibrant colors, 12 different options total.

Product Features

  • 1.75mm diameter, 1kg net weight, HIPS Filament
  • Filament Roundness: +/- 0.07mm
  • Filament Diameter: +/- 0.05mm
  • Recommended Print Temperature: 210 – 230°C, depending on printer model
  • Compatible with RepRap, Makerbot, Afinia, Solidoodle or any standard spool based 3D printer

Check Out Our Website For Details…