Ergo 3D Tobacco Hopper and Handle Bundle for Powermatic 2 and 2+ Cigarette Rolling Machine

This is a bundled listing to help you save on shipping fees. This contains two items 1) Ergo 3D Handle includes two-piece handle and a Philips head screw. 2) Also included is the Ergo 3D Hopper, shown in pictures above. Ergo 3D Handle info: The 3D printed Ergo Handle solves that challenge by making the handle longer/wider and thus easier to pull down. Simply fasten the two pieces together with the included screw. Only takes around 10 sec. Do not over-tighten the screw past snug. The two pieces lock together and will last the life of your machine. Each Ergo 3D Handle takes about 1-2 hrs to make on our 3D printer here in Allentown. Combine with our Ergo 3D Hopper to make for a truly Zen like experience while making cigarettes… and save 10x the money over buying packs or cartons from the store. Ergo 3D Hopper info: Ergo 3D Tobacco hopper holds enough tobacco to make around a pack and half to two packs of cigarettes when sitting atop a Powermatic 2 cigarette injection machine. We 3D print these to order here in Allentown, Pennsylvania and they take around 3~4 hours to make. We include a small tube of super glue so you can affix it onto the loading insert. The hopper makes quick work of rolling your own and will save you lots of time. (Refilling the machine stock takes much longer and makes a mess.) If you choose, apply a few drops of the included super glue on the outside of the left and right edges at the base to make it extra snug. There is no need to put any along the back side of the hopper. Happy rolling and saving 10x the cost of buying them in a store. P.S. We highly suggest using King’s vs 100’s, as you don’t have to pack the injector well as much. Recent reviews: Great product! Very happy!! kenger65 5/18 AAA+++ taz12tg 3/18 I couldn’t be more satisfied. I totally love the hopper. zafreebird 3/18 Good product, thank you davieira2011 2/18 Very nice, fits good zsteel55 2/18 Excellent, hopper squanto-99 2/18

Product Features

  • Bundled listing for Hopper and Handle to help you save
  • Faster operation due to less refilling of hopper – Easier lever control
  • Includes super glue for optimal performance
  • Maximize capacity, yet still allows tobacco to flow freely
  • Powermatic Injector sold separately – Ergo 3D Hopper and Handle is Made in USA

Detailed Information available on our Homepage…

Dikale 3D Print Removal Tools with Sturdy Wooden Handle, Tool Kit for 3D Printer Spatula Palette Knife Painting Enhanced Version Pack of 2

Dikale 3D Print Removal Tools

Product Features

  • ✔️【Enhanced version pack of 2】It includes 2 sizes. You can choose a suitable one to help with prying out printed items.
  • ✔️【Thicker neck,not bent easily】It needs to be just a bit stiffer to loosen a stubborn print, but it doesn’t damaged any of your projects your my printer bed by using it.
  • ✔️【Fantastic and versatile】Although it’s marketed as a 3D print removal tool, it also very useful for removing stickers and scraping the small amounts of filament you tend to get stuck on the bed from not having a level bed, and it helped remove the painters tape residue left from the tape. Works very well to remove freshly printed parts.
  • ✔️【Flexible and effective】This 3D Print Removal Tool works super well. A must have for a 3D printer. It’s great for getting prints off your print surface without damaging their bases. It is very simple and extremely effective. Seems to be very well constructed and the blade is flexible but doesn’t get bent up easily; it has a very flat top which makes removing models really easy.
  • ✔️【Durable and stiff】Note that this isn’t made for prying the print off the bed like you would use a putty knife. It’s more for sliding under the print and unsticking as you go, or perhaps slipping the middle under the print and “sawing” the print off. It’s thin and flimsy which lets it get under the print, but not TOO flimsy – it’s also thick enough to be durable, assuming you aren’t prying. Prying would definitely ruin this tool. This tool is that much better than trying to use something else.

Click Here For More Information

3D Print Removal Tools with Natural Sturdy Wooden Handle, Tool Kit for 3D Printer Spatula Palette Knife, 6 Pack

Features :
– A set of 6 3D printer tools, rigid, functional, various sizes, various shapes, various uses
– Excellent flexible flat top, stainless steel, anti-destructive
– Solid and comfortable wooden handle
– Coarse neck can be used to remove the raft and trim the support

Specifications :
Size: 6 various sizes
Weight: 0.12kg
Material: Stainless steel with Natural wooden handle
Color: Brown and Yellow

Directions for Use
To remove the print from the bed, process the edges of the print under the corners of the print about halfway between the tip of the insert and the handle
Next, use a sawing action to place the tool under the rest of the print to separate it from the bed. Tilting or twisting the blade slightly will help speed up printing
If the blade under the printer does not start, align the left edge of the tool with the right corner of the printer and rotate the handle clockwise. Repeat until the corner rises and let the blade begin to descend
If the print sticks firmly to the print bed, try pushing the tool closer to the print. This places the thicker part of the blade (closest to the handle) under the object and helps pry the part as a wedge. Rock the blade loose and repeat
If the print is jammed too tightly to be removed by a tool, you may need to slightly increase the initial nozzle height. The idea is to have the print firmly attached to the bed during the printing process, but the tool can still be used to remove it.

Package includes :
6*3D Print Removal Tools

Product Features

  • Enhanced 6 pack: It contains 6 sizes. You can choose the right one to help identify printed matter.
  • Thicker neck that does not bend easily: It takes a little harder to loosen stubborn prints, but it does not use any of your items as the print bed.
  • Amazing and Versatile: Although it is marketed as a 3D print removal tool, it is also great for removing stickers and scratching a small amount of thread because you do not have a flat bed and get stuck in bed and help remove the paint tape to leave Of the residue. Good removal of freshly printed parts
  • Durable and hard: Please note that this is not intended to pry off the print from the bed, just as with a putty knife. More to slide when printing and gliding, or you may be able to swipe the middle of the print and “cut” the print. It’s thin and fragile, it can get it under print, but not too fragile – it’s thick enough to be durable, assuming you’re not prizing it. This will surely ruin this tool. This tool is much better than trying to use something else
  • Yellow wooden handle tool Speeds removal of parts from print bed.

Click Here If You Need More Detailed Info…

Spatula Palette Painting Knife Set – Bemaxy Professional Stainless Steel 3D Printing Tools Wood Grain Handle Putty Knife, 3D Printer Accessories – Set of 5

Save you all the hassle from the crappy plastic scrapper your printer came with!
They are great tool to go with your 3D printer — the long, flexible blade is rounded, making it safer for kids, effective with large printed items, and minimizes damage to the printing surface.
The different shapes makes it easier because of part variations.
Material:
stainless steel blade with wood handle
Weight:
0.088 pounds/knife Package included:
5 x Spatula Palette Knife

Product Features

  • A Good addition to your 3D printer equipment. They make easier and safer to take out printed pieces out of the printer table, reducing risk of damaging the piece.
  • Useful – it also doubles as great cleaning tool for scraping off glue and various debris (with the aide of liquids like water and/or alcohol).
  • Five pallete knives painting knives set with different blade shapes and sizes, which can exchange use and slide flexibly under big parts and save your time.
  • Works well for PEI and PLA prints.
  • Make sure to keep it laid flat when removing prints from your platform.

Detailed Information available on our Homepage…

Teenitor 3D Print Removal Tools with Sturdy Wooden Handle, Tool Kit for 3D Printer Spatula Palette Knife Painting Enhanced Version Pack of 5

Weight:0.12kg
Material: Stainless steel with wooden handle
Color: Brown
A great tool for your 3D printer-Stiff, flexible,rigid,functional,effective with 5 pieces, this set of tool minimizes damage to the printing surface.At the same time, the thicker neck is useful for removing rafts and for trimming off supports
Directions for Use
To remove prints off the bed, work the edge of the tool under a corner of the print, approximately half way between the tip of the blade and the handle. Next, use a sawing motion to get the tool under the rest of the print to separate it from the bed. Tilting or twisting the blade slightly will help speed up the lifting of the print. When tilting the blade, twist the handle counter-clockwise if you’re working from the right side of the print. (If you are left-handed and starting from the left, twist the tool clockwise)
If you cannot get the blade under the print to start, bring the left edge of the tool against a right-side corner of the print and twist the handle clockwise. Repeat until the corner lifts up enough to allow the blade to start getting under the print
If the print is firmly stuck to the print bed, try pushing the tool so that the handle is closer to the print. This brings the thicker part of the blade (closest to the handle) under the object and acts as a wedge to help pry the part up. Wiggle the blade loose and repeat
If the print is stuck too firmly to remove with the tool, you may need to slightly increase your starting nozzle elevation. The idea is to have the print stick firmly to the bed during printing, but still be removed with the tool

Product Features

  • Enhanced version pack of 5: it includes 5 sizes.you can choose a suitble one to help with prying out printed items.
  • Thicker neck,not bent easily:It needs to be just a bit stiffer to loosen a stubborn print,but it doesn’t damaged any of your projects your my printer bed by using it.
  • Fantastic and versatile:Although it’s marketed as a 3D print removal tool,it also very useful for removing stickers and scraping the small amounts of filament you tend to get stuck on the bed from not having a level bed, and it helped remove the painters tape residue left from the tape.Works very well to remove freshly printed parts
  • Durable and stiff: Note that this isn’t made for prying the print off the bed like you would use a putty knife. It’s more for sliding under the print and unsticking as you go, or perhaps slipping the middle under the print and “sawing” the print off. It’s thin and flimsy which lets it get under the print, but not TOO flimsy – it’s also thick enough to be durable, assuming you aren’t prying. Prying would definitely ruin this tool.This tool is that much better than trying to use something else
  • Flexible and effective:This 3D Print Removal Tool Works super well,A must have for a 3D printer. It’s great for getting prints off your print surface without damaging their bases.it is very simple and extremely effective. Seems to be very well constructed and the blade is flexible but doesn’t get bent up easily;it has a very flat top which makes removing models really easy.

Click Here If You Need More Detailed Info…