Ivelink 3mm Heating Block Cotton and Kapton Tape Adhesive Gold Tape Heat High Temperature Resistant for 3D Printer (11Pcs, 12mm 33mm)

Specification of Heating block cotton
Material: cotton
Size: 62mm*20*2mm +/-0.2mm

Specification of Kapton
Material: durable polyimide and silicone
Size:12mm*33m
Temperature resistance:-50℃ to 280℃

Safety Guide

Keep away from small children
This Heater Block Cotton in normal working, may be appear some slight smoke, and the color will turn into dark brown and black is normal, it will not burn! please feel relieved to use
Must pay attention to the Safe working temperature of the 3D printer’s consumable and accessories, May cause high temperature hazards
PLA (190°C-230°C)
ABS (230°C-250°C)

Package
10*heating block cottons
1*Heat Resistant adhesive tape

Product Features

  • Heating block cotton is made from heat-resistant ceramic fiber
  • Polyimide Tape is thin and conformable enabling masking of uneven surface
  • Heating cotton work as high as 900 degree,Tape is high of 250 degree
  • High performance, reliability and durability, with a unique combination of electrical, thermal, chemical and mechanical properties
  • This heat insulation cotton is used for 3D printer nozzle keeping warm

Detailed Information available on our Homepage…

CCTREE 15PCS 3D Printer Heating Block Cotton with Kapton Tape Hotend Nozzle Heat Insulation Cotton for Ultimaker/Makerbot/Creality CR-10

Specification
Material: cotton
Cotton Size: 70mm x 20mm x 2mm
Kapton:Width 6mm, Lenght:33M
Feature: heat preservation

Note: this product only suitable for 3D printer using indoors

Attention: Small parts, keep away from children

Package including:
15PCS x 2mm heating block cotton
1PCS x6mm Kapton Tape

WARNING!!
1.3D printer replacement parts, Always shut off power to the circuit before starting installation work.
2.The surface temperature of the 3D printer might be high, and be careful not to touch the heating element to prevent injury.
3.3D printer initial operation, Do not run the equipment Unattended state.
4.When printing with a PLA(190°C-230°C) or ABS(230°C-250°C)consumable, if the temperature sensor and other accessories fail, it may cause high temperature hazards. Do not run the equipment Unattended state.
5.To ensure the users will use the product safely and properly, Please read your 3D printer manual first and follow the instructions step by step before using the product.
6.Due to the variety of possible end-uses, it is ultimately the responsibility of the customer to determine a product’s suitability for a particular application.

Product Features

  • Heat preservation, keep the printer heating evenly and work better
  • You can Punch Holes or Cut fit size to the cotton.
  • Recommend Safe Working Temperature : <300°C
  • Cotton Size: 70mm x 20mm x 2mm Kapton:Width 6mm, Lenght:33M
  • Package including:15PCS x 2mm heating block cotton + 1PCS x 6mm Kapton Tape

Visit The Website For More Information…

ARQQ Heat Bed Mosfet Tube Hot Bed Power Module Expansion for 3D Printer Heating Bed Accessories(Pack of 2)

Details: Dimensions: 60*50mm
Net Weight: 40g
Color:Black
Max Current: 25A(Enhance heat dissipation)
Wire’s color is random

Summary:
1. Remove basically all ouside screws for your anet a8 control box
2. Take pictures of existing board wiring
3. Unscrew two large 12/14GA wires on the board labeled “hot bed”
4. Screw these two wires into the new mosfet board labled “hot bed”
5. Connect the small jumper wires (white) to the control board where you just removed the two wires and screw them down. Note the polarity on each board. Match (+) to (+) and (-) to (-)
6. FInd 2x 6-8″ pieces of 12 or 14 AWG wire. Most cheap extension cords are 16AWG (too thin). Your local home depot / menards / ace will have this as cut-to-length
7. Run one of the 6″ wires to the power supply (+), screw in; and the other side to the (+) DC IN on the new mosfet board. Repeat for the negative wire (-) to (-)
8. Many people use velcro to secure the new board to the top of the control box. Others print off a holder from thingiverse
9. Put everything back together
10. When complete, you’ll see a blue light activate for signal from inside the box when the bed heater is activated by the control board

Package Included:
2xHot bed MOS Tube Power Module Expansion

Product Features

  • Work with anet a8 3d printer heat bed
  • Completely solve the hot bed power is too large and the load current issue
  • Under the premise of normal cooling, it work stable under I(Max)=25A, the current must not exceed 25A while the process working
  • General Add-on Heated Bed Power Expansion Module
  • Note: Any issue please contact us before, we will always here to help!

Detailed Information available on our Homepage…

Dernord Cartridge Heater 12V 100W Electric Hot Rod Stainless Steel Heating Element Replacement


Product Features

12v 100W Cartridge Heater widely used for 3D printer

From the Manufacturer

The Dernord 12v 100w Cartridge heaters are an extraordinarily versatile and durable product that is used to heat a myriad different processes from heavy industrial – plastics and packaging applications to critical care medical devices and analytical test instruments to being used on aircrafts, railcars and trucks. Cartridge heaters are capable of operating at temperatures of up to 1400F and achieving watt densities of up to 260 watts per square inch.

Application

1: Boiling water because of flange

2: Patient Comfort heating used in medical devices

3: Mold die and platen heating

4: Seal bars used in packaging equipment

5: Heating of hot stamps
Technical Details

Tube length: 100mm

Tube diameter: 8mm

Wire length: 32cm

Product Features

  • Cartridge Heater 12v 100w
  • Tube diameter: 8mm (0.32 Inch)
  • Tube length: 100mm (3.94 Inch)
  • Cartridge heaters is consist of a cylindrical stainless steel 304 tube and thus provide a high corrosion prevention
  • Widely used for manufacturing plastic and rubber parts in the car industry or in the food processing industry, etc

Detailed Information available on our Homepage…

ARQQ Heat Bed Mosfet Tube Hot Bed Power Module Expansion for 3D Printer Heating Bed Accessories

Details: Dimensions: 60*50mm
Net Weight: 40g
Color:Black
Max Current: 25A(Enhance heat dissipation)
Wire’s color is random

Summary:
1. Remove basically all ouside screws for your anet a8 control box
2. Take pictures of existing board wiring
3. Unscrew two large 12/14GA wires on the board labeled “hot bed”
4. Screw these two wires into the new mosfet board labled “hot bed”
5. Connect the small jumper wires (white) to the control board where you just removed the two wires and screw them down. Note the polarity on each board. Match (+) to (+) and (-) to (-)
6. FInd 2x 6-8″ pieces of 12 or 14 AWG wire. Most cheap extension cords are 16AWG (too thin). Your local home depot / menards / ace will have this as cut-to-length
7. Run one of the 6″ wires to the power supply (+), screw in; and the other side to the (+) DC IN on the new mosfet board. Repeat for the negative wire (-) to (-)
8. Many people use velcro to secure the new board to the top of the control box. Others print off a holder from thingiverse
9. Put everything back together
10. When complete, you’ll see a blue light activate for signal from inside the box when the bed heater is activated by the control board

Package Included:
1xHot bed MOS Tube Power Module Expansion

Product Features

  • Work with anet a8 3d printer heat bed
  • Completely solve the hot bed power is too large and the load current issue
  • Under the premise of normal cooling, it work stable under I(Max)=25A, the current must not exceed 25A while the process working
  • General Add-on Heated Bed Power Expansion Module

Detailed Information available on our Homepage…