[sg_popup id=1]

BIQU 42 Nema 17 Stepper Motor 34mm Height for CNC X / Y / Z axis For 3D Printer Electronic Parts

Specification:
Step angle accuracy: + – 5%(full step,not load)
Resistance accuracy: + – 10%
Inductance accuracy: + – 20%
Temperature rise: 80deg Max(rated current,2 phase on)
Ambient temperature ———–20deg ~+50deg
Insulation resistance:100MΩ Min,500VDC
Insultion Strength——–500VAC for one minute
Step Angle (deg):1.8A
Motor Length(mm): 33MM
Rated Current (A): 1.33A
Phase Resistance (Ohm) :2.1Ω
Phase Inductance(mH) :2.5mh
Detent Torque (N.cm) : 19mm
Voltage:2.8V
Shaft length mm: 19mm

Package List:
1x Stepper Motor
1xUSB Cable

Visit The Website For More Information…

Velleman K8400-BT Buildtak 3D Print Bed Surface for Model K8400 Vertex 3D Printer, 1 Grade to 12 Grade, 9.44″ Height, 8.44″ Length

The K8400-BT BuildTak sheet is an easy-to-install, heat-resistant, long-lasting 3D printing surface. BuildTak is a thin, durable plastic sheet that adheres to the print bed of FFF (fused filament fabrication) 3D printers. It provides an optimal printing surface for 3D objects to adhere to for the duration of a print, while allowing for a clean, easy removal of completed builds.

Product Features

  • For : K8400 vertex 3D printer
  • Dimensions: 9.44″ x 8.44″
  • Long-lasting 3D printing surface

Click Here For More Information

Q3D ThreeUp v3 w/ Heated Bed 3D Printer i3 DIY Kit 7″ x 7″ x 9″ 50 Micron Layer Height

ThreeUp Version 3 w/ Heated Bed for Warp Free ABS and Nylon Printing

This is the 3rd generation of the famous ThreeUp printers. With over 7,000 units out in the wild, the ThreeUp is the standard for entry level 3D printer kits. The 3rd generation comes with revised instructions to make assembly and printing easier than ever. Many of our customers report build times of under 2 hours til their first print!

The ThreeUp sets itself apart from other 3D printers in its class by using the finest linear motion components, including chromed, induction hardened linear shafts, dual precision ACME screws (for the Z axis) and LM8LUU linear bearings for double the rigidity over the LM8UU bearings used in most printer kits. Each of the linear motion components is tied together with a CNC laser cut melamine frame (Made in the USA) which provides not only rigidity but light weight for high speed printing.

The printing area of the ThreeUp for both the heated bed and standard version is increased to 175mm x 175mm x 228mm. While most printers max out at 100 micron layer heights, the ThreeUp can print consistenly at 50 microns, double the resolution of its competitors. With improved print speeds up to 100mm/s due to the lighter weight extruder and hotend, print time is almost cut in half!

The brand new auto-adjusting extruder puts the exact amount of tension required on the filament and allows quick loading and unloading. Due to its open design you can visually see the feeding of filament into the hotend for easy maintenance and setup. The all new metal hotend improves print speeds and reliability and looks AWESOME!

Additional improvements include a much more robust mounting system for the linear bearings and belts as well. The printer is compatible with all filaments that have melting temperatures below 250C including, PLA , ABS , Nylon , Laywoo , Bronze fill , Ninja Flex , PVA , HIPS and many more!

Product Features

  • Version 3 Improves Reliability, Speed and Print Quality
  • New Q3D Metal Hotend
  • 50 Micron Layer! Double the Resolution of Its Competitors
  • Now Up to 100mm/s Print Speeds
  • Easier Than Ever to Assemble (2-6 Hours), No Soldering or Crimping Required

Click Here If You Need More Detailed Info…

Q3D ThreeUp v3 3D Printer i3 DIY Kit 7″ x 7″ x 9″ 50 Micron Layer Height

ThreeUp Version 3

This is the 3rd generation of the famous ThreeUp printers. With over 7,000 units out in the wild, the ThreeUp is the standard for entry level 3D printer kits. The 3rd generation comes with revised instructions to make assembly and printing easier than ever. Many of our customers report build times of under 2 hours til their first print!

The ThreeUp sets itself apart from other 3D printers in its class by using the finest linear motion components, including chromed, induction hardened linear shafts, dual precision ACME screws (for the Z axis) and LM8LUU linear bearings for double the rigidity over the LM8UU bearings used in most printer kits. Each of the linear motion components is tied together with a CNC laser cut melamine frame (Made in the USA) which provides not only rigidity but light weight for high speed printing.

The printing area of the ThreeUp for both the heated bed and standard version is increased to 175mm x 175mm x 228mm. While most printers max out at 100 micron layer heights, the ThreeUp can print consistenly at 50 microns, double the resolution of its competitors. With improved print speeds up to 100mm/s due to the lighter weight extruder and hotend, print time is almost cut in half!

The brand new auto-adjusting extruder puts the exact amount of tension required on the filament and allows quick loading and unloading. Due to its open design you can visually see the feeding of filament into the hotend for easy maintenance and setup. The all new metal hotend improves print speeds and reliability and looks AWESOME!

Additional improvements include a much more robust mounting system for the linear bearings and belts as well. The printer is compatible with all filaments that have melting temperatures below 250C including, PLA , ABS , Nylon , Laywoo , Bronze fill , Ninja Flex , PVA , HIPS and many more!

Product Features

  • Version 3 Improves Reliability, Speed and Print Quality
  • New Q3D Metal Hotend
  • 50 Micron Layer! Double the Resolution of Its Competitors
  • Now Up to 100mm/s Print Speeds
  • Easier Than Ever to Assemble (2-6 Hours), No Soldering or Crimping Required

Click Here If You Need More Detailed Info…

HATCHBOX 3D PTR-ALPHA Alpha 3D Printer, Fully Assembled, Heated Build Plate with Glass Bed and Automatic Leveling, Volume 300 mm Diameter x 330 mm Height, Print Resolution 50-400

Welcome to Hatchbox 3D Printer Clean and elegant, Hatchbox’s Alpha is fully assembled and easy to calibrate for beginning designers to expert engineers. While many consumers may be familiar with the Cartesian 3D printers, which are named after the coordinate system where movement is always linear left to right, front to back, and up and down, the limitation of Cartesian printers is its inability to change direction instantaneously. Hatchbox Alpha printers expand on this square 3D space by featuring a circular print bed that is designed for speed and precise prints. The elongated design allows for you to build much taller prints that otherwise would have been built in parts by a Cartesian printer. The overall minimalistic construction makes 3D printing easier, and with less complication to reduce maintenance and cost. Technical Specification: Operating System: Windows XP, Windows 7, MAC OS Compatible Material: ABS, PLA, Performance PLA, Wood, TPU, PET, PETG, HIPS, PVA, TPE, and Specialty Filaments with a extrusion temperature under 270° C Readable File Type: GCODE Print Speed: 20-150 MM/S Travel Speed: 300 MM/S Filament Diameter: 1.75 MM Nozzle Diameter: 0.40 MM Extrusion Temperature: Up to 270° C Heated Build Plate Temperature: Up to 110° C USB Compatible: Yes SD Card Compatible: Yes Build Platform: Glass Automatic Leveling: Yes Heated Build Plate: Yes Hatchbox Filament Rack Included: Yes 3D Printer Assembled: Yes Hatchbox Filament Rack Assembled: No Software: Any open source with file output. GCODE Instructional Manual Included: Yes Additional Accessories and Replacement Included: Yes.

Product Features

  • Shipped fully assembled
  • Build Volume: 300 MM Diameter x 330 MM Height – Filament Diameter 1.75 MM – Nozzle Size: 0.40 MM
  • Print Resolution: 50-400 Micron (0.05 MM to 0.40 MM)
  • Automatic leveling with heated bed and glass build platform
  • Readable File Type: GCODE

Click Here For More Information