Wangdd22 15pc/set 1.75mm Teflon Throat Tube+0.4mm Extruder Nozzle Print Heads+Heater Blocks Hotend for MK8 Makerbot Anet A8 3D Printer

Descriptions:
Specification of Brass Nozzle:
Type:0.4mm Extruder Brass Nozzle Print Head
Color:Golden.
Material:Brass
Size:5*13mm
Input Diameter:1.75mm
Output Diameter:0.4mm

Specification of Extruder Tube:
Type:Nozzle Throat
Compatibility:3D Printer
Outer Thread:M6
Nozzle Throat Outer Diameter:7mm
Nozzle Throat Inner Diameter:4mm
Length:30mm
Filament Diameter:1.75mm
Material:Stainless Steel

Specification of Heater Blocks Hotend:
Name:Metal Part
Color:Silver
Specification:20*20*10mm

Package list:
15 piece/set ( 1.75mm Teflon Throat Tubex5pcs,nozzle 0.4mmx5pcs,Heater Blocks Heating Hotendx5pcs)

Product Features

  • Pack of 5 x 3D Printer Extruder Hotend 30mm Length 1.75mm Nozzle Inputting Tube( for MK8 Makerbot Reprap Prusa I3 3D Printer) and 5 x 3D Printer 0.4mm Extruder Brass Nozzle Print Head.
  • Nozzle Throat: Outer Thread – M6; Inner Diameter – 2mm; Length – 30mm; Filament Diameter – 1.75mm; Material – Stainless Steel.
  • 0.4mm Extruder Brass Nozzle Print Head: Color – Golden; Material – copper (brass); Size – 5*13mm; Input Diameter: 1.75mm; Output Diameter: 0.4mm.
  • Compatibility: compatible with all 1.75mm PLA ABS 3D Printer
  • Quanlity:15pcs/lot (5 piece 1.75mm Nozzle Inputting Tube,5 piece 3D Printer 0.4mm Extruder Brass Nozzle Print Head,5 piece Heater Blocks Hotend)

Visit The Website For More Information…

SIMPZIA Heat Bed Power Module General Add-on Hot Bed Power Module Expansion Board High Current Load Module Mos Tube Hotend Replacement with Cables for 3D Printer – 2 Pack

Heated Bed Power Module Features:
Based on powerful MOSFET HA210NO6
Dimensions: 70 x 45mm/ approx 2.76 x 1.77″
Distance between holes: 62.8 x 37.8mm/ approx 2.47 x 1.49″
Supply/Operating Voltage: 12V-50V (12-24VDC recommended)
Max Current: 25A (Enhance heat dissipation) safe for prolonged times. ensure active cooling of the heatsink.
This module is based on power MOSFET and will allow PID control of the heated bed (DC-DC Relays usually do not allow this)

Package Includes:
1 x Heated Bed Power Module.
1 x Connection cable for input signal
2 x Power cable

Note:
This module under the premise of normal cooling, it work stable under (Max) = 25A, the process of using the current not exceed 25A.

Product Features

  • APPLICATION: This high power module is a general add-on heated bed power expansion module for 3D printer. It can work with the Anet A8.
  • UNIQUE DESIGN: With unique snowflake heatsink design, it has a great cooling effect. The heat bed power module can be used in both Lerdge motherboard and other 3D printer motherboards.
  • 25A MAXIMUM CURRENT: This high power module helps your 3D printer equipped with the Lerdge controller board become even more powerful. The module can solve the current load problem when the heated bed power is too large. With this add-on module to board lead the maximum current up to 25A.
  • GOOD PROTECTION: When using heated bed 3D printer for 12V power supply which may cause excessive current during times, with this module, it can well protect the connectors on the controller board from burning.
  • PACKAGE INCLUDES: 2 x Heated bed power module (motherboard is not included) and 2 x Connection cable for input signal. BONUS: 4 x Power cables.

Detailed Information available on our Homepage…

5pcs Aluminium V6 Heat Block For RepRap J-head Extruder HotEnd 3D Printers Parts Heater Hot End Heating Accessories 20x16x11.5 mm Part

Throat and the Nozzle Mounting Holes: M6
Heating Rod Mounting Holes: diameter 6mm
Fixed Screw Holes: M3
Thermocouple Mounting Holes: 3mm
Material: Aluminum
Size(mm): 20*16*115
Package Included:
5 x Aluminum Heater Block

Product Features

  • Accept Nozzle with M6
  • Material: aluminum, size: 20 * 16 * 11.5MM, slotted width 1.3MM; heating hole 6.11MM
  • Suitable for Filament : both 1.75mm and 3.0mm M6 Nozzle
  • Package Included: 5pc Aluminium Heat Block

Visit The Website For More Information…

LEANINGTECH 4Pcs 2 Pin Cooling Fan 40x40x10mm DC 12V for 3D Printer Hotend Extruder, Quiet Brushless 7000RPM

Specifications:
Voltage: 12V
Current: 0.12A
Air volume 7CFM
Speed 7000r / min
Wiring Length: 100cm
Weight 20g

Package Content:
4 x 2 Pin Cooling Fan for 3D Printer

Product Features

  • ☢ UNIVERSAL SIZE: 40*40*10mm, These small fans are widely used in humidifier, aromatherapy and other small appliances series like small heat radiating communication equipment, military equipment, intelligent industrial control equipment plate cooling heat and high precision medical equipment(3D printer) as cooling function.
  • ☢ FAST COOL DOWN: With 2-pin dual ball bearing design, these 3D printer fans is with 7CFM high air flow and fast speed up to 7000RPM, at the same time it is pretty quiet when working.
  • ☢ CONNECTOR TYPE: 2 terminal connectors with 2 pin type, portable small size.
  • ☢ BRUSHLESS COOLING FAN: Rated Voltage: DC 12V, Current: 0.12A. With mounting screws, very easy to install.
  • ☢ WHAT YOU GET: 4 packs of cooling fan for 3D printer.

Detailed Information available on our Homepage…

WINSINN 3D Printer J-head V6 Hotend Extruder Kit – High Speed Volcano Upgrade + Sensor Copper heater block 0.4mm Copper & Stainless steel Nozzle For PT100 1.75mm Filament

►This is The latest V6 kit, replacement parts is very easy, so you can easily upgrade your printer. High-quality stainless steel nozzle + copper heating block + TC4 titanium alloy, you can ultra-high temperature printing. Let’s try it :)))

 

—————————————————————————————————————

 

►TC4 titanium alloy: TC4 titanium alloy material composition is Ti-6Al-4V, (a + b) type titanium alloy, It has good mechanical properties, specific strength. TC4 strength sb = 1,012MPa, density g = 4.4 x 103, specific strength sb / g = 23.5, while the specific strength of alloy steel sb / g is less than 18. Titanium alloy has low thermal conductivity. Titanium alloy thermal conductivity 1/5 of steel , 1/13 of aluminum, 1/25 of copper , TC4 thermal conductivity l = 7.955W / m.K. The above data is only for reference.

 

—————————————————————————————————————

 

►Sensor heater block is the 2016 new V6 heater block, it compatible with PT100 sensor, size 23*16*12mm

►Copper heater block is The latest heating block, suitable for ultra-high temperature printing, size 22*16*11.5mm

 

—————————————————————————————————————

 

Package include:
►1 x High quality copper + stainless steel 1.75mm-0.4mm nozzle
►1 x High quality copper + stainless steel 1.75mm-0.4mm Volcano Sharp nozzle
►1 x High quality Standard V6 + Volcano +Copper heater block
►1 x TC4 titanium alloy + 4.1mm Bore Heat Break
►1 x V6 Aluminum alloy Radiator + PC4-01 Pneumatic fittings
►1 x Heatsink Shroud + High Speed 3010 Fan 12V 0.1A 9000±RPM
►1 x 12V 40W 1m Heater Cartridge Cable + NTC 100K 3950B Temperature sensor
►2 x Allen wrench + 4 x Fan fixing screw

Product Features

  • Emergency Notice: Recently some customer feedback that V6 heat sink had the thread error, the heat sink in the kit is M6 thread, it can not be used. We are very sorry about this problem. This is our mistake. We apologize to all customers. If you have received a problem product, don’t worry. Contact us immediately, keep your product, we will re-send to you immediately for free. Thank you!
  • TC4 Titanium alloy Heatbreak – Ultra-low thermal conductivity, Make sure the printer stable operation.
  • 3 Models of heater blocks, upgrade your printer, experience the latest high-temperature printer technology.
  • High quality International copper nozzle + stainless steel nozzle (1.75mm-0.4mm)
  • Suitable use for Remote and 1.75mm Filament. With Heatsink Shroud + High Speed 3010 Fan, the fan 0.1A 9000+-10%RPM

Click Here If You Need More Detailed Info…