Amagabeli 4″ Carbon Filter for Indoor Plants Grow Tent Air Filters 4 Inch Activated Virgin Charcoal Air Scrubber 1050+ IAV Odor Control for Inline Fan Hydroponics Grow Room Ventilation Pre-filter

Exceptional Odor Control: Amagabeli 190 CFM Air Flow Carbon Fliter can effectively eliminate odors, filter particulates and purify the air to provide both you and your plants with clean and fresh environment.

Professional Grade: Amagabeli filter contains very special virgin carbons that come from some of the oldest, most pressurized sources on earth which have exceptional odor control and make air fresh.

Simple Setup: Easy install with a simple plug-and-play feature that will keep you free from any unnecessary mess or hassle.

Environment Friendly: Not only will you keep your space smelling clean and fresh, but Amagabeli’s carbon filters also eliminate additional harmful and potentially ill-fating chemicals from the air you breathe.

Product Features

  • Absorbent Carbon Filter: 4 inch carbon filter, 1050+ IAV Australian virgin charcoal bed, machine packed carbon enables 99.8% filtered air flow. Inner and outer mesh provides 55% open area allowing increased air flow.
  • Air Scrubber: Materail more durable than aluminum, lasts long from plants germination, sexing, flowering and harvest. Includes washable pre-filter, easily mount the filter with velcro seam.
  • Odor Control: Air purifier to eliminate odor, pungent smell and particulates from indoor grow tent, hydroponics grow room, smoking room, living room, bathroom, kitchen, drying rooms, pet house, welding workshop, 3D printer etc. Perfect for tomato plants, pepper, vegetable lettuce, cilantro, cigarettes smell plant, herbal cannabis, medical marijuana, herbs.
  • Fresh Air Combo: The 4in carbon filter matches with 4 inch inline fans, can fans, duct fans, intake fans, exhaust fans, air exchange fans, ventilation duct, air ducts, paint fumes hose, vent duct hoses, fan speed controller and other ventilation system accessories.
  • Reversible Smell Filtration: The charcoal air filter can be used as both Intake Filter and Exhaust Filter. After a period of time use as an intake filter, go on using it as an exhaust filter. Moving air, purifying air and filtering air.

Detailed Information available on our Homepage…

1 Roll 6″ inch WIDE 3D Printing Made In USA PRO Grade Blue Painters Tape Masking Clean Release Easy Removal NO RESIDUE (144MM x 55M 5.7 inch). 3D Printer bed grip deck cover 3D Prints Removal 60 Yd

3D printing enthusiasts will LOVE this tape! Cover your printer bed deck for easy removal of prints and replace tape easily as it wears. 3D printers do not come with good surfaces for easy print removal.

This Blue Painters Tape is Professional Grade multi-use Contractors tape featuring a specially formulated, high tack adhesive. Works for textured, semi-rough, or smooth surfaces and has the tackiness it needs to adhere to your surfaces yet allows for clean removal up to 21 days.

High performance masking tape is for general industrial, construction, and do-it-yourself use. The acrylic adhesive system will not dry out or lose holding power. Works well on drywall, glass, hardwood floors, wood trim, and a variety of surfaces. Most typical use is LATEX paint jobs and window protection mask off.

(REMOVE SLOWLY and carefully from freshly painted surfaces!)

Very Important: Surfaces must be well cleaned, dust free, greaseless, and very dry before application. While the backing of the tape is moisture resistant the adhesive is definitely not. ALL adhesive is pressure & heat sensitive. Make sure you press it firmly after application. Apply at room temperature or above if possible. The dryer and warmer the installation area, the more you run your fingers over it, the better the adhesion (less bleed). REMOVE ASAP! (always pull gently at slight angle AWAY from painted edge) Painters tape is known as semi-permanent removable, it gets stronger every day. The longer you leave it on the more difficulty removing it. Rolled or brushed paint jobs require much sooner removal than sprayed.

Blue Painters Tape is not for everything! May not play well with all types of oil based paints, lacquers, etc. You must be willing to experiment, there are 100’s of kinds of tape for a reason.

Other uses: 3D print bed masking or printer deck covering, Glue or Caulk lines, Over spray protection, Chrome protection when cutting or grinding.

Product Features

  • Premium #1 Grade USA MADE Product – Thicker paper, Stronger adhesive for Contractors & Pros
  • 6 Mil High Tack creped backing, 22.0 steel adhesion, 20 lb tensile strength, 9% elongation
  • UV Resistant for 10 days up to 150 degrees outdoors, 40-125 indoor range for 21 day clean removal
  • 3D Printer bed print surfaces – Strong, flexible, durable, versatile – broad range of applications
  • Dispenser friendly, Pulls off roll VERY quick without tearing, needs LESS pressure to stick down.

Click Here For More Information

1 Roll 5″ inch WIDE 3D Printing Made In USA PRO Grade Blue Painters Tape Masking Clean Release Easy Removal NO RESIDUE (120MM x 55M 4.7 inch). 3D Printer bed grip deck cover 3D Prints Removal 60 Yd

3D printing enthusiasts will LOVE this tape! Cover your printer bed deck for easy removal of prints and replace tape easily as it wears. 3D printers do not come with good surfaces for easy print removal.

This Blue Painters Tape is Professional Grade multi-use Contractors tape featuring a specially formulated, high tack adhesive. Works for textured, semi-rough, or smooth surfaces and has the tackiness it needs to adhere to your surfaces yet allows for clean removal up to 21 days.

High performance masking tape is for general industrial, construction, and do-it-yourself use. The acrylic adhesive system will not dry out or lose holding power. Works well on drywall, glass, hardwood floors, wood trim, and a variety of surfaces. Most typical use is LATEX paint jobs and window protection mask off.

(REMOVE SLOWLY and carefully from freshly painted surfaces!)

Very Important: Surfaces must be well cleaned, dust free, greaseless, and very dry before application. While the backing of the tape is moisture resistant the adhesive is definitely not. ALL adhesive is pressure & heat sensitive. Make sure you press it firmly after application. Apply at room temperature or above if possible. The dryer and warmer the installation area, the more you run your fingers over it, the better the adhesion (less bleed). REMOVE ASAP! (always pull gently at slight angle AWAY from painted edge) Painters tape is known as semi-permanent removable, it gets stronger every day. The longer you leave it on the more difficulty removing it. Rolled or brushed paint jobs require much sooner removal than sprayed.

Blue Painters Tape is not for everything! May not play well with all types of oil based paints, lacquers, etc. You must be willing to experiment, there are 100’s of kinds of tape for a reason.

Other uses: 3D print bed masking or printer deck covering, Glue or Caulk lines, Over spray protection, Chrome protection when cutting or grinding.

Product Features

  • Premium #1 Grade USA MADE Product – Thicker paper, Stronger adhesive for Contractors & Pros
  • 6 Mil High Tack creped backing, 22.0 steel adhesion, 20 lb tensile strength, 9% elongation
  • UV Resistant for 10 days up to 150 degrees outdoors, 40-125 indoor range for 21 day clean removal
  • 3D Printer bed print surfaces – Strong, flexible, durable, versatile – broad range of applications
  • Dispenser friendly, Pulls off roll VERY quick without tearing, needs LESS pressure to stick down.

Click Here For More Information

Anycubic i3 Mega 3D Printer Intelligent Leveling with 3.5 Inch Touch Screen and Large Print Size

Quality Guarantee:

Professional tech support and customer service. Feel free to make contact! We are here to answer to any customer needs. Satisfaction guaranteed!

Certifications:

All Anycubic i3 Mega 3D Printers have been Certificated by CE, FCC, RoHS and EN

Technical Specifications:

Printing Technology: FDM (Fused Deposition Modeling)

Layer Resolution: 0.05-0.3 mm

Positioning Accuracy: X/Y 0.01mm Z 0.002mm

Print Speed: 20~100mm/s (Recommended Speed 60% )

Travel Speed: 150mm/s

Nozzle Diameter: 0.4 mm

Extruder Quantity: 1

Support Print Materials: PLA, ABS, HIPS, WOOD

Build Dimensions : 210 x 210 x 205mm

Here is the video for your reference: https://youtu.be/zwKTwh0XlPk

Here is the manual in pdf:https: //drive.google.com/open?id=0B8VIB533cgdMaTdLQVU4SG8wd2M

Temperature:

Operational Print Bed Temperature: 80-100ºC Max

Operational Extruder Temperature: 260ºC

Ambient Operating Temperature: 8ºC – 40ºC

Software:

Input Formats: .STL, OBJ, .DAE, .AMF

Slicer Software: Cura

Cura Output Formats: G-Code

Connectivity: SD Card & USB support

Electrical:

Input Rating: 100-240V AC, 50/60Hz, 1.5A Physical Dimensions:

Printer Dimensions: 405 x 410 x 453mm

Package Weight: 15kg

Package List:

1x I3 Mega

1x 8G SD Card

1x User Guide

1x Backup Hotend Set

1x Test filament ( Random Color )

1x Spool Holder

1x Tool Set

Product Features

  • Professional After-sale Support: All the Anycubic 3D printers have been certificated by CE. Need professional tech support ,please feel free to contact us directly
  • Large build volume: 210 x 210 x 205mm and user friendly 3.5-inch TFT touch screen
  • Rigid metal frame and superior stability, can be assembled in under just 2 minutes! Faster and more accurate printing within mere microns
  • Filament detection: Automatic printing pause when filament runs out, resume after filament re-load with just one click
  • Proximity sensor leveling support. Combined with the advantage of manual and auto leveling.Auto resume when printing in case of a power failure

Click Here For More Information

QIDI TECHNOLOGY 3D Printer, New Model: X-one, Fully Metal Structure, 3.5 Inch Touchscreen

Product Description:
QIDI TECH new 3D printer model X-one is easy to operate,safe and very cost-effective desktop 3d printer. It’s a good choice not only for 3D printing novices but also for educators,students or hobbyists who are inventing,creating or course studying. The 3.5 inch touch screen and concise interface is very easy to operate.The frame of the X-one is all metal which makes the 3d printer very stable for printing. PLA is an environmentally friendly filament. QIDI TECH after-sales team supplies technical support and lifetime service.

Included in the QIDI TECHNOLOGY 3D Printer X-one box:
-1 roll of 1kg PLA filament,color randomly selected.
-Power cable
-USB cable
-SD Card
-SD Card Reader
-Scraper
-Tool box
-Filament guide tube

Printing Technology: FDM (Fused Deposition Modeling)
Build Volume:150 L X 150 W X 150 H mm
Layer Resolution: 100~500 microns
Positioning Precision: 11 microns on X and Y and 2.5 microns on Z
Filament Diameter: 1.75 mm
Nozzle Diameter: 0.4 mm

Frame & Body: Metal
Extruder Quantity: One
Product Dimension:380x320x360mm (15×12.5×14 inches)
Product Weight: 19 kg(42 lbs)

Software: Cura,Simplify 3d
Operating Systems: Windows 7/8/Vista Mac OS X
Printing: Via USB Cable or SD card
Voltage: 115V~230 V
Power:100W

Product Features

  • Heating bed can be heated to 110C, this will support printing both PLA or ABS filament.
  • New designed double layer metal structure makes printing very stable.
  • Metal platform support,CNC machined aluminum alloy build platform with a thickness of 6mm gurantees the surface will be completely flat.
  • Upgraded 10mm guide rod ensure a precise Z axis movement and prevent platform arm from deforming.
  • 3.5 inch touch screen is a simple,user-friendly interface and easy to operate.

Click Here For More Information