[sg_popup id=1]

INKBIRD 12″ Stainless Probe NTC-30CM Sensor Thermocouple w/ DC Cord for ITC-1000,ITC-306T, ITC-308S, ITC-310T Thermostat Temperature Controller


Features:
NTC Temperature Sensor 12in Stainless Stell Probe with 6.5ft DC cord
This temperature probe can be submersed into your beer direclty during fermentation.
No need to worry about inserting a smaller probe into a separate thermowell temperature probe.
It’s ONLY compatible with INKBIRD’s following controllers: ITC-308,ITC-306T,ITC-310T, ITC-1000.

Measuring temperature range: -50℃~120℃
Sensor Type: NTC
Probe Material:Stainless steel
Probe Dimensions: 6mm x 300mm (0.24in x 12in)
Cord Length (excluding probe): 2m (6.5ft)

Package Included:
1 x 12″ Probe Sensor
1 x 10cm DC Cord cable

Product Features

  • NTC Temperature Sensor 12in Stainless Stell Probe with 6.5ft DC cord
  • It’s ONLY compatible with INKBIRD’s following controllers: ITC-308,ITC-306T,ITC-310T, ITC-1000.
  • The sensor is waterproof and is better for the freshwater tank than the saltwater tank.
  • Can be submersed into your beer direclty during fermentation.
  • Easy to use

Detailed Information available on our Homepage…

Inkbird Dual Stage Digital Temperature Controller Fahrenheit Thermostat with Sensor for 3D Printer,Freezer,Fridge,Hatching ect


Fahrenheit and Celsius Display Can Be Choose
Temperature Calibrating, Refrigerating control output delay protection
Control the Temperature by Setting the Temperature Set Value and the Difference Value
Alarm When Temperature Exceeds the Limit or When Sensor Error
2 Relays, Switch Between Cooling and Heating Modes

Technical Parameter:
Output: 2 Relays
Temperature Measuring Range: -50~210 oF / -50 oC-99 oC
Resolution: 0.1 oF / 0.1 oC
Accuracy: ±1 oF(-50 oF -160 oF)/ ±1 oC(-50 oC -70 oC) Power Supply: 110VAC 50Hz/60Hz
Power Consumption: 3W
Sensor: NTC Sensor
Relay Contact Capacity: Cooling (10A/250VAC)/ Heating (10A/250VAC);
Ambient Temperature: 0 oC-60 oC
Storage Temperature: -30 oC-75 oC
Relative Humidity: 20-85% (No Condensate)

Package Content:
1x Temperature controller ITC 1000 110V
1x 7.87″ SENSOR
1x Muanal

Product Features

  • It does indeed read in deg F.
  • Can control both heating and cooling output
  • Has an alarm to indicate sensor failure or high temperature
  • Highly accurate and reliable temperature controller
  • Be more user friendly than the STC-1000

Detailed Information available on our Homepage…

Inkbird Pre-Wired 308S + 1.97” Replaceable NTC-5cm Probe Digital Dual Stage Temperature Controller 110V 1000W for Aquarium Heaters,Reptile,Hatching etc.


Features:
Temperature Control Range : -50~99 °C / -58~210 ° F
Temperature Resolution: 0.1 ° C / 0.1° F Temperature
Accuracy: ±1°C (-50 ~ 70°C) / ±1°F (-50 ~ 160° F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V ~240V AC
Buzzer Alarm: High and Low Temperature Alarm
Dimension Body: 140x68x33mm (5.5×2.7×1.3inch)
Socket: 85x42x24mm(3.3×1.7x1inch)
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Ambient Temperature: -30~ 75 ° C / -22~ 167 ° F
Storage Temperature: -20~ 60 ° C / -4~ 140 ° F
Humidity 20~85% (No Condensate)
Warranty: 1 Year

Package Content:
1x ITC308S Temperature Controller;
1x 1.97”Stainless Steel Probe
1x English Manual

About Probe:
This temperature probe can be submersed into aquarium direclty.
No need to worry about inserting a smaller probe into a separate thermowell temperature probe.
It’s compatible with INKBIRD’s following controllers:ITC-308,ITC-306T,ITC-310T.

Product Features

  • 110V 1000W
  • Plug and play design, easy to use
  • ℃ / ℉ Display can be chosen
  • Easy to set your parameters
  • Heating and Cooling differential function could be set separately

Detailed Information available on our Homepage…