PTFE Tube Teflon PiPe to J-Head Hotend RepRap Rostock Bowden Extruder For 1.75mm Filament 3D Printer Part (2m, 2mmx3mm)


Specification:
Material: PTFE(common name:Teflon)
Used For: 1.75mm filament Bowden 3D Printer,Translucent
Temperature range (Degree F): -454 to 500.
Flame rating: UL-224 VW-1(UL-recognized).
Density: 2.15-2.20 g/cm3.
Size: 2mm*3mm, 2mm*4mm, 4mm*6mm
Length: 1Meter, 5Meter, 10Meter

Package:
1 x PTFE Tube

Product Features

  • Excellent resistant to acids, alkali and all kinds of organic solvents: ASTM D543.
  • High lubricating ability and non-stick.
  • Raw materials meet FDA requirements per FDA 21 CFR 177.1550 for use with food contact surfaces.
  • Excellent electric property and long life. Widely used in electronics, chemicals, medical and industrial.
  • Multiple sizes to your choice.

Visit The Website For More Information…

Zinnor 3D Printer Parts V6 J-Head Hotend Extruder Nozzle-0.4mm filament-1.75mm RepRap With 12V fan and 1 m PTFE tube Printer Accessories

Features:
High accuracy: 1%
Resistance value at 25°C=100K
Wiring insulation: high temperature teflon/PTFE
Wiring length: 1 meter

Specification:
Type: Bowden J-head
Thermister: 100K NTC

Package include:
1 x Metal J-Head hotend 1.75mm / 0.4mm nozzle / 12V 40W Heater / NTC3950 Thermistor.
1 x Heatsink Shroud with High Speed Fan 3010 12V 0.13A
1 x One Meter long Bowden tubing 4mm OD 2mm ID
1 x PC4-M6 Straight Fitting

Note :
Dear friend,if you have any question about the product, please contact us before leaving the feedback, we will deal with the issue immediately and carefully until you are satisfied.

Product Features

  • ★[Length] :Metal J Head Hotend 1.75mm Filament 0.4mm Bowden Extruder Reprap 3D Printer
  • ★[Included]: NTC3950 Thermistor and 12V 40W Heater
  • ★[Material]: This 3D print head is equipped with a stainless steel all-metal heat insulation material without internal PTFE lining
  • ★[Parameters]: NTC 3950 Thermistor Parameters: Marin Thermistor Temperature Table
  • ★[Small size]: 1.25mmx2.0mm glass beads

Visit The Website For More Information…

5pcs Aluminium V6 Heat Block For RepRap J-head Extruder HotEnd 3D Printers Parts Heater Hot End Heating Accessories 20x16x11.5 mm Part

Throat and the Nozzle Mounting Holes: M6
Heating Rod Mounting Holes: diameter 6mm
Fixed Screw Holes: M3
Thermocouple Mounting Holes: 3mm
Material: Aluminum
Size(mm): 20*16*115
Package Included:
5 x Aluminum Heater Block

Product Features

  • Accept Nozzle with M6
  • Material: aluminum, size: 20 * 16 * 11.5MM, slotted width 1.3MM; heating hole 6.11MM
  • Suitable for Filament : both 1.75mm and 3.0mm M6 Nozzle
  • Package Included: 5pc Aluminium Heat Block

Visit The Website For More Information…

WINSINN 3D Printer J-head V6 Hotend Extruder Kit – High Speed Volcano Upgrade + Sensor Copper heater block 0.4mm Copper & Stainless steel Nozzle For PT100 1.75mm Filament

►This is The latest V6 kit, replacement parts is very easy, so you can easily upgrade your printer. High-quality stainless steel nozzle + copper heating block + TC4 titanium alloy, you can ultra-high temperature printing. Let’s try it :)))

 

—————————————————————————————————————

 

►TC4 titanium alloy: TC4 titanium alloy material composition is Ti-6Al-4V, (a + b) type titanium alloy, It has good mechanical properties, specific strength. TC4 strength sb = 1,012MPa, density g = 4.4 x 103, specific strength sb / g = 23.5, while the specific strength of alloy steel sb / g is less than 18. Titanium alloy has low thermal conductivity. Titanium alloy thermal conductivity 1/5 of steel , 1/13 of aluminum, 1/25 of copper , TC4 thermal conductivity l = 7.955W / m.K. The above data is only for reference.

 

—————————————————————————————————————

 

►Sensor heater block is the 2016 new V6 heater block, it compatible with PT100 sensor, size 23*16*12mm

►Copper heater block is The latest heating block, suitable for ultra-high temperature printing, size 22*16*11.5mm

 

—————————————————————————————————————

 

Package include:
►1 x High quality copper + stainless steel 1.75mm-0.4mm nozzle
►1 x High quality copper + stainless steel 1.75mm-0.4mm Volcano Sharp nozzle
►1 x High quality Standard V6 + Volcano +Copper heater block
►1 x TC4 titanium alloy + 4.1mm Bore Heat Break
►1 x V6 Aluminum alloy Radiator + PC4-01 Pneumatic fittings
►1 x Heatsink Shroud + High Speed 3010 Fan 12V 0.1A 9000±RPM
►1 x 12V 40W 1m Heater Cartridge Cable + NTC 100K 3950B Temperature sensor
►2 x Allen wrench + 4 x Fan fixing screw

Product Features

  • Emergency Notice: Recently some customer feedback that V6 heat sink had the thread error, the heat sink in the kit is M6 thread, it can not be used. We are very sorry about this problem. This is our mistake. We apologize to all customers. If you have received a problem product, don’t worry. Contact us immediately, keep your product, we will re-send to you immediately for free. Thank you!
  • TC4 Titanium alloy Heatbreak – Ultra-low thermal conductivity, Make sure the printer stable operation.
  • 3 Models of heater blocks, upgrade your printer, experience the latest high-temperature printer technology.
  • High quality International copper nozzle + stainless steel nozzle (1.75mm-0.4mm)
  • Suitable use for Remote and 1.75mm Filament. With Heatsink Shroud + High Speed 3010 Fan, the fan 0.1A 9000+-10%RPM

Click Here If You Need More Detailed Info…

YOTINO All Metal 1.75mm V6 J-Head Hotend Full Kit | 5Pcs Extruder Brass Print Head | 5Pcs Stainless Steel Nozzle Throat for 3D Printer

YOTINO 16Pcs J-Head V6 Hotend Sets/5Pcs All-Metal Hotend Kit+5 Pcs Extruder Brass Print Head+5 Pcs Stainless Steel Nozzle Throat Pipes+Mini hexagonal wrench

All Metal V6 J-Head Hotend Sets:
12V/40W heater(the temperature can up to 280℃, Long-term temperature: 240℃/ short-term temperature: 280℃)
12V high speed fan with shroud
1M long PTFE/teflon tubing (4mm OD and 2mm ID)
PC4-01 Tube Fitting
Specification:
Nozzle Throat Extruder Tube:
Outer Thread Type: M6 M7
Outer Diameter:6mm
Inner Diameter:4mm
Teflon Pipe Inner Diameter : 2mm
Length : 22.5mm
Filament Diameter : 1.75mm
Material : Stainless Steel

Brass Nozzle Print Head
Color: Golden
Material: Brass
Input Diameter: 1.75mm
Output Diameter: 0.2mm/0.3mm/0.4mm/0.5mm

Package Incuded:
1 x All Metal V6 J-Head Hotend Sets (5 Pcs)
1 x 0.2mm Nozzle Print Head
1 x 0.3mm Nozzle Print Head
2 x 0.4mm Nozzle Print Head
1 x 0.5mm Nozzle Print Head
5 x 1.75mm Nozzles Throat 1 x mini L-shaped hexagonal wrench

Product Features

  • Package Contents – All metal V6 J-Head 12v/40w/1.75mm/0.4mm full kit (V6 print head + fan + fan cover + PTFE tube + tube fitting) + 5pcs extruder brass Print Head(1*0.2/1*0.3/2*0.4/1*0.5mm) + 5Pcs Stainless Steel Nozzle Throat + 3ft/1m PTFE Tube
  • High Temperature & Heat Ventilation – 12v/40w high-speed fan, rapid cooling to prevent NTC burnout, disconnection, heating rod aging fast, stainless steel material nozzle throat high quality resistance whose temperature up to 280℃
  • EASY INSTALLATION – NTC with terminal connector, using without install, mini nickel-plated L-shaped hexagonal wrench, can be used in the synchronous wheel, coupling, heating block v5, v6 and other accessories
  • Anti-leakge & anti-blockage – Seamless connect nozzle and tube, no leakge and bolckage
  • Compatibility – Hotend is suitable for ABS, PLA and other traditional printed materials. Perfect applied for 1.75mm / 0.4mm Filament E3D Long-Distance Filament Bowden extruder

Detailed Information available on our Homepage…