[sg_popup id=1]

KINGPRINT GT2 Timing Pulley Aluminum Bore 40 Teeth 8mm for Width 6mm for 3D Printer Parts(Pack of 2pcs)

Specification:
Tooth number: 40
Tooth pitch: 2mm
Hole diameter: 8mm
Tooth width: 6.5mm

Package Included:
2* 40 Teeth GT2 Timing Pulley 8mm Bore
1*Hexagon wrench

Product Features

  • Product Name: 40 teeth GT2 Timing Pulley
  • Material: Aluminum
  • Type: Ball
  • Material: Aluminum Alloy
  • Widely used in milling machine, gear shaper, drilling machine, CNC engine lathe, hobbing machine or other machinery transmission occasions

Visit The Website For More Information…

KINGPRINT 3D Printer Kit for Reprap Prusa I3 20T Timing Pulley + 2 Meter GT2 Timing Belt + LM8UU Linear Bearing + 608ZZ Bearing + 624ZZ Bearing + Motor Shaft Coupler

Specification:

GT2 Timing Pulley:
Pulley length:18mm
Teeth: 20T
Bore:5mm
Belt width:6.5mm

GT2 Timing Belt:
Length:2m
Belt width:6mm

LM8UU Linear Bearing:
Inside diameter:8mm
Outside diameter:15mm
Length:24mm

608ZZ Bearing:
Dimension:8*22*7mm

624ZZ Bearing:
Dimension:4*13*5mm

5*5 Coupler Wave:
Material : Aluminium
Inner : 5mm to 8mm
Total Size : 20*25mm

Package Contents:
2 x 20t timing pulley
1 x 2m GT2 belt
12 x LM8UU linear bearing
4 x 608zz Bearing
1 x 624zz Bearing
2 x 5*5 coupler wave
1 x Wrench

Product Features

  • Movement kits suitable for prusa i3 3d printer
  • GT2 Timing Belt System designed for linear motion and precision,6mm width, stretch resistant fiberglass reinforced neoprene rubber GT2 timing belt
  • LM8UU suitable for linear motion on 3D Printer and CNC parts
  • The motor shaft coupler provides an extremely tight grip
  • High Quality Aluminum Pulleys for 5mm diameter shafts

Click Here If You Need More Detailed Info…

KINGPRINT Coupling for 3D Printer Accessories CNC Engraving Machines DIY Aluminum Coupling 5mm to 8mm for 3D Printer(Pack of 5pcs)

Specifications:

Color: Bule
Aaterial: Aluminum
Size: 5*8MM
Usege: 3D printer CNC engraving machines
High: 25mm
outer diameter : 14mm
inner diameter: 5 and 8mm

Package Included:

5* Blue Aluminum Coupling
1*Wrench

Visit The Website For More Information…

KINGPRINT DC 12V 30A 360W Universal Regulated Switching Power Supply for 3D Printer, CCTV, Radio, LED Strip Lights,Computer Project

Basic requirements: 12V 30A 360W
Rated voltage range: 110-220VAC
Input voltage range: 110-220V
Input frequency range: 47 ~ 63Hz
Input voltage protection: 115 ~ 150% intermittent mode
Input voltage recovery: automatic recovery
Impact current: ≤1%
Machine efficiency: ≤ 0.5%
Output voltage range: 12V ± 0.5%
Output current: 30A
Ripple and noise: ≤100 mVp-p
Rise time: ≤50ms
Voltage regulation rate: ≤0.5%
Load regulation: ≤1%
Output over-current protection: current sag type
Output short circuit protection: IGBT
Output over-voltage protection: soft-start protection
Insulation resistance: > 50MΩ
High-quality materials, heat-resistant, dust-proof and moistureproof, flame-retardant, built-in cooling fan, safe and reliable, can guarantee better cooling effect, the service life of up to 20,000 hours

NOTE:
* This product is not waterproof, please be careful when you use it.
* This Power Supply is only suitable for indoor use, non-detachable power shell.
* Don’t place other items in the product range of 5 cm, to ensure the powersupply with good thermal environment and safety.
* Carefully verify the power link is correct rigorously, power lines reversed before use it. Don’t touch the case during the power is working.
* Don’t place other items in the product range of 5cm, in the range of 50cm within the outlet Do not place other flammable items.
* Do not short-circuit output if no output, please use off one minute re-energized.
* Professional installation of qualified electrician is highly recommended.
* If the power supply is defective, please contact us at first.

Package Included:

1 * 12V 30A Power Supply

Product Features

  • Dimensions: 21.5 * 11.5 * 5.0 cm /8.46*4.53*1.97 inch (L*W*H)
  • Operating temperature: -10 ℃ ~ +50 ℃, 20% ~ 95% RH (no condensation)
  • Storage temperature: -20 ℃ ~ +85 ℃, 20% ~ 95% RH (no condensation)
  • Temperature coefficient: 0.02 ~ 0.05% / ℃
  • Cooling method: fan cooling

Click Here For More Information

KINGPRINT Masking Tape 50 x 33 Blue 2 Rolls for 3D Printer

Specifications:
The 3D printer printing molding, the workpiece removed from the hot bed has been being the problem of 3D printer enthusiasts, and our masking tape has improved the problem effectively.
Other uses: 3D print bed masking or printer deck covering, Glue or Caulk lines, over spray protection etc.

Package Included:
2 * Masking tape

Product Features

  • Before printing, cover the masking tape on the hot bed, that will be easy to remove the workpiece, because the tape itself is also designed adhesive material, it can be clean from the hot bed easily.
  • Masking tape is effectively to prolongs the life of the hot bed, protecting the hot bed from being scratched.
  • Making the print surface more smooth, when printing, the resin is fixed, the workpiece close to the tape, and it’ll not warp.
  • Application: ABS, PLA material printing, width 50mm, length 33m.
  • NOTE: please make the print surface cleanly before application.

Visit The Website For More Information…