Haitronic 120pcs 20cm length Jumper Wires/dupont cable Multicolored(10 color) 40pin M to F, 40pin M to M, 40pin F to F for Breadboard/Arduino based/DIY/raspberry Pi 2 3/Robot Ribbon Cables Ki

We Haitronic are original Factory with traditonal wholesale distributors on various jumper wires, arduino wire connectors.

New released on Amazon only on Oct 7th 2016, although there are few reviews till now, we actually sold few hundreds of a month.

This 3 in 1 set Jumper wire is Durability Tested ULTRA USERFUL!

After you tear apart into individual cable, in total 120pcs cable, 10 different color do to multiful DIY electronic connection. Each axis has 20cm length, with 10 colors option(each color has 12 roots), and 3 various F2F, F2M, M2M pin, very convenient for Arduino/breadboard or other DIY connection, Maker experiment, engineers LAB testing, as well as can be soldering as you wish.

——————————————————–

Features:

Ø Color: 10 options as shown in the pictures.

Ø Material: high-grade copper core.

Ø Each cable length: 20cm / 8-inch.

Ø 3 pieces of the 40pin breadboard jumper wires in one set together.

Ø Including one 40-pin male to female jumper wires, one 40-pin male to male jumper wires, one 40-pin female to female jumper wires.

Ø The male ends meant for insertion into standard 0.1 quot;(2.54mm) female sockets and the female ends are meant for insertion into standard 0.1 quot;(2.54mm) male headers.

Ø The cables can be separated into single root as you request to do multiple connection.

Ø Portable design, easy and safe to use.

——————————————————–

What’s in Package:

* 1 x 20cm 40-pin Male to Female prototyping Jumper Wires Ribbon Cable

* 1 x 20cm 40-pin Male to Male prototyping Jumper Wires Ribbon Cable

* 1 x20cm 40-pin Female to Female prototype Jumper Wires Ribbon Cable

ØYour REVIEW is ULTRA PRECIOUS! we sincerely invite you share your review for this Multicolored BB Jumper Wires, MANY THANKS!

Product Features

  • 10 different colors, 120units copper cable in total, for making prototypes with arduino boards, stepper motor 3D printer etc, The combinations provide a jumper for whatever you need. Just peel off
  • Factory directly, 10 tiny copper wires inside of single jumper wire: high-level copper wire inside, durable for conductive connection.
  • 0.127mm, 36 AWG/ single root, 20cm(7.87inch)/axis; Standard 2.54mm headers and sockets.
  • Can be detached into120 single axis: 40 male-male, 40 male-female, 40 female-female.
  • Computers and smart phone maintainance, Various prototyping, such as Arduino/Maker/3D printer control board, DIY experiment needs frequently, If the terminals does not damaged it can be reused, if dam

Visit The Website For More Information…

AIKEER 14Pcs 3D Printer Nozzles M6 Brass Extruder Nozzle Print Heads (2Pcs 0.2mm + 6Pcs 0.4mm + 2Pcs 0.6mm + 2Pcs 0.8mm + 2Pcs 1.0mm) and 6Pcs 30MM Length Extruder 1.75MM Tube for MK8 Makerbot Reprap


AIKEER Accessories Series
Designed and Manufactured by AIKEER Only

Specification of Brass Nozzle:
Type: 0.4mm Extruder Brass Nozzle Print Head
Color: Golden
Material: brass
Input Diameter: 1.75mm
Output Diameter: 0.4mm

Specification of Extruder Tube:
Type: Nozzle Throat 
Compatibility: 3D Printer 
Outer Thread: M6 
Color: Silver
Material: Stainless Steel
Length: 30MM / 6/5 Inch
Filament Diameter: 1.75MM

Package
2 * 0.2mm extruder nozzle
6 * 0.4mm extruder nozzle
2 * 0.6mm extruder nozzle
2 * 0.8mm extruder nozzle
2 * 1.0mm extruder nozzle
6 * extruder nozzle 1.75MM Tube

Note: Compatible with all 1.75mm PLA ABS printer, works with Anet A8

Contact
If you have any problem with our products or service,
Please contact us first and we will provide the best solution for you soon.
Wish you a happy shopping.

Warranty
30 Days Money Back

Product Features

  • Compatibility: This Extruder Brass Nozzle Print Head is fit for MK8 Makerbot Reprap 3D Printers
  • Premium Material: Made of solid and durable high precision Brass material which is wear resistant, can provide a long service life
  • Size and Installation: The Input Diameter is 1.75mm and the Output Diameter is 0.4mm. It connected with M6 thread in external
  • Enough Quantity: The package includes 14 packs 3D printer nozzles, it’s enough quantity to replace the old or broken one
  • Warm Notice: These 3D printer heads are small parts, please keep them away from children to avoid swallow risk

Click Here For More Information

Hot End for 3D Printer Assembled Extruder DIY Hotend 1.75mm Filament 0.4mm Nozzle 12V 40W Heater Including 10PCS Extra Nozzles and Tubes(30mm Length)

MK8 Extruder Hot End kit, white wire was temperature thermistor, red wire was heating tube 12V/40W
Material: Aluminum and Stainless Steel and Brass
Extra Nozzles: 7*0.4mm, 1*0.2mm, 1*0.3mm, 1*0.5mm
Extra Tube: 10x 30mm Length Extruder 1.75mm Tube Compatible with 1.75mm PLA ABS 3D printer.

Product Features

  • Offers you an easy way to upgrade your hotend with plenty of MK8 brass extruder nozzles for 1.75mm Filament, including 0.4mm(7pcs), 0.2mm(1pc), 0.3mm(1pc) and 0.5mm(1pc).
  • 12V/40W high temperature resistance heater catridge(wire length 1M/39.4inches), operating temperature range:0~+280°C (0~+538°F)
  • Aluminium heater block 20*20*10mm, comes with a necessary screw. Working perfectly with everyday filaments like PLA and ABS. Note: heat block inner hole for set screw: M6 and M3.
  • 30mm Length Extruder 1.75mm Tube, made from Aluminum. Compatible with 1.75mm PLA ABS 3D printer. Reduces extrusion force and improve reliability of retractions thanks to the improved internal surface finish.
  • You can repair your extruder with this kit instead of replacing a new one when your extruder suffers a clog that can’t be fixed. A great replacement hot end for MK8, i3, E3D, Anet A8, Alunar M508, CR7, V2 etc.

Visit The Website For More Information…

Hicarer 3D Printer Tool Kit Include 6 Pieces 0.4 mm Brass Extruder Nozzle Print Head, 6 Pieces 30 mm Length Extruder 1.75 mm Tube, 3 Pieces 0.4 mm Cleaning Drill Bits with 2 Pieces Hex Drivers for MK8


3D printer tool kit include 6 pieces 0.4 mm brass extruder nozzle print head, 6 pieces 30 mm length extruder 1.75 mm tube, 3 pieces 0.4 mm cleaning drill bits with 2 pieces hex drivers for MK8 3D printers

3D printer tool set:
Anti-leakage and anti-blocking design, outer thread, you can install directly, compatible with most 1.75 mm PLA ABS 3D printer.

Specifications:
Nozzle print head:
Type: 0.4 mm extruder brass nozzle print head
Color: golden
Material: brass
Oversize: 8 x 13 mm
Input diameter: 1.75 mm
Output diameter: 0.4 mm

Nozzle inputting tube:
Type: nozzle throat
Compatibility: 3D printer
Outer thread: M6
Nozzle throat outer diameter: 6 mm
Nozzle throat inner diameter: 4 mm
Pipe inner diameter: 2 mm
Length: 30 mm
Filament diameter: 1.75 mm
Material: stainless steel

Cleaning drill bits:
Type: drill bit
Bit diameter: 0.4 mm
Bit length: 7 mm
Shank length: 31 mm

Package include:
6 x 0.4 mm brass extruder nozzle print heads
6 x 30 mm length extruder 1.75 mm tube
3 x 0.4 mm cleaning drill bits
2 x Hex drivers

Attention:
1. Don’t use the drill to clean until the nozzle is heated to above 200 degrees.
2. Small parts, keep away from children.

Product Features

  • Package include: 6 pieces 0.4 mm brass extruder nozzle print heads, 6 pieces 30 mm length extruder 1.75 mm tube, 3 pieces 0.4 mm extruder nozzle drill and 2 pieces hex drivers
  • Nozzle print head: made of brass material; Oversize: 8 x 13 mm; Input diameter: 1.75 mm; Output diameter: 0.4 mm
  • Nozzle inputting tube: made of stainless steel; inner diameter: 2 mm; Length: 30 mm; Outer thread: M6; Filament diameter: 1.75 mm
  • Cleaning drill bits: bit diameter: 0.4 mm; Bit length: 7 mm, the length of shank: 31 mm; Comes with a plastic box, convenient to store
  • Good compatibility: these 3D printer tool kit is compatible with most 1.75 mm PLA ABS 3D printer

Click Here If You Need More Detailed Info…

BALITENSEN 6pcs of K800 Upgrade Diagonal Carbon Push Rods Arm Kit 217mm Length 4x6mm Parallel Arm Fisheye Rods for Delta Mini Kossel 3D Printer Part

Specification:
Lenght of carbon Rod: 180MM
Total Length: 217mm
Outer Diameter: 6MM
Inner Diameter: 4MM

Package:
6* Carbon Rod With Fisheyes

Product Features

  • The whole set has six parallel manipulator.
  • 217MM Length, 4*6mm Parallel Arm Fisheye Carbon Rod Kit Set.
  • K800 upgrade Diagonal Push Rods Kit – 3D Printer Delta Kossel.
  • M3 screw is used in knuckle bearing.
  • High Accuracy.

Visit The Website For More Information…