Heat Bed Mosfet, MACTISICAL 2 Pack 3D Printer Heat Bed Power Module 3D Printer Board Expansion Board MOS Tube High Current Load Module

100% Brand new and Premium Professional Grade MACTISICAL 3D Printer Hot Bed Power Expansion Board .

This module is based on power mosfet and will allow PID control of the heated bed (DC-DC Relays usually do not allow this).

According to the thermal power of the bed, please choose the matching power supply, with sufficient margin. High-Power heated bed is recommended to use 24V power supply,under the same power requirements, the current is smaller than 12V.

Specification
Color: Black, cable length: 6 inch
Net Weight: 75g(approx.)
Size: 2.36″ x 1.97″ x 1.2″ / 60mm x 50mm x 30mm
Mounting Holes: D=3.2MM For M3 Screws.

Notice:
Under the premise of normal cooling, it work stable under I(Max)=25A, the current must not exceed 25A while the process working.

Package Content:
2*Heat bed Power Module with 2 connection cables

Support
Please do not hesitate to contact us if there’s any problem or question about our products. We will keep improving our products and service, and try our best to meet customers’ needs. Thank you for supporting MACTISICAL.

Product Features

  • ★ WELL MADE- New material with superior quality stainless, High-grade Aluminum block for best connectivity and long life.
  • ★ HIGH TRANSMISSION – With this addon module to your 3D printer motherboard you can lead the maximum current up to 25A.
  • ★ MULTIFUNCTION – Completely solve the hot bed power is too large and load current problems,and can well protect the connectors on the controller board from overheating.
  • ★ MEET YOUR NEEDS -Widely used for common 3D printer models,extruder and other open 3D printer motherboards.such as Anet A8, etc.
  • ★ WARNING – For use on some devices (for example,Anet A8),you need to make sure the power supply is set to 110 volts instead of the default 220 volts.If the voltage is too high, the product will get super hot, even charred!! Don’t touch it lightly.

Click Here For More Information

Extruder Part Hot End, MACTISICAL 3D Printer Hot End Assembled Extruder Kits Hictop Parts Accessory with 1.75mm Filament Direct Feed 12V Extruder 0.4mm Nozzle

100% Brand new and Premium Professional Grade MACTISICAL 3D Printer Hot End Assembled Extruder Kits Hictop Parts Accessory .

Specification
Type: Assembled Extruder Kits
The kits include: 1 pc Aluminum Heater Block, 1 pc 1.75MM Tube and 1 pc 0.4MM Brass Extruder Nozzle (extra 4pcs for spare)
Pre-wired thermistor to the updated heater block
Input Diameter: 1.75mm
Output diameter: 0.4mm
Voltage: 12V
Extruder Tube
Type: Nozzle Throat
Compatibility: 3D Printer
Outer Thread: M6
Nozzle Throat Outer Diameter: 7mm
Nozzle Throat Inner Diameter: 4mm
Teflon Pipe Inner Diameter: 2mm
Length: 26mm
Filament Diameter: 1.75mm
Material: Stainless Steel
Extruder Brass Nozzle
Nozzle: 0.4mm
Input Diameter: 1.75mm
Output Diameter: 0.4mm
Material: copper (brass)
Size: 5*13mm

Package Content:
1 x Assembled Extruder Kits
4 x 3D Printer Extruder Brass Nozzle Print Head (0.4mm)

Attention: Small parts, keep away from children

Product Features

  • ★ WELL MADE- New material with superior quality stainless throat, heater cartridge and High-grade Aluminum block for best connectivity and long life.
  • ★ PRECISION MATCHING – Chamfer design, much easier for feeding; Sandblastng surface & anodic oxidation treatment.
  • ★ EXQUISITE WORKMANSHIP – Capable of printing high temperature melting plastics such as polycarbonate and nylon.
  • ★ MULTIFUNCTION – Hotend can be used for both: direct feed and bowden applications. Good for ABS, PLA and other conventional print materials.
  • ★ MEET YOUR NEEDS –  The item is a 3D printer extruder which saves 35% more power, compatible with all 1.75mm PLA ABS printer.

Visit The Website For More Information…