Zinnor 3D Printer Parts V6 J-Head Hotend Extruder Nozzle-0.4mm filament-1.75mm RepRap With 12V fan and 1 m PTFE tube Printer Accessories

Features:
High accuracy: 1%
Resistance value at 25°C=100K
Wiring insulation: high temperature teflon/PTFE
Wiring length: 1 meter

Specification:
Type: Bowden J-head
Thermister: 100K NTC

Package include:
1 x Metal J-Head hotend 1.75mm / 0.4mm nozzle / 12V 40W Heater / NTC3950 Thermistor.
1 x Heatsink Shroud with High Speed Fan 3010 12V 0.13A
1 x One Meter long Bowden tubing 4mm OD 2mm ID
1 x PC4-M6 Straight Fitting

Note :
Dear friend,if you have any question about the product, please contact us before leaving the feedback, we will deal with the issue immediately and carefully until you are satisfied.

Product Features

  • ★[Length] :Metal J Head Hotend 1.75mm Filament 0.4mm Bowden Extruder Reprap 3D Printer
  • ★[Included]: NTC3950 Thermistor and 12V 40W Heater
  • ★[Material]: This 3D print head is equipped with a stainless steel all-metal heat insulation material without internal PTFE lining
  • ★[Parameters]: NTC 3950 Thermistor Parameters: Marin Thermistor Temperature Table
  • ★[Small size]: 1.25mmx2.0mm glass beads

Visit The Website For More Information…

Zorvo Brand New 3D Printer J-head V6 Hotend Extruder Nozzle-0.4mm filament-1.75mm , With 12V fan and 1 m PTFE tube

Description:
●With PTFE in hot regions of our HotEnd we can reach 260C with the supplied thermistor. By swapping a thermistor for a thermocouple (may require additional electronics) you can reach over 280C.
●This not only allows you to print extremely high temperature materials like PP/ Polycarbonate and Nylons but also eliminates HotEnd meltdown failures associated . latest v6 hotend has a PTFE liner inside the hotend this liner is never subjected to high temperatures so there is no risk of damaging the liner through overheating.
●Our new HeaterBlock gives the fastest heat up times and the most responsive temperature control by clamping around the cartridge for maximum thermal contact. The new thermistor placement means you get the most accurate temperature readings with the fastest response. What this means for you the user is that you can go from 20C to 200C in just 65 seconds, temperature control is responsive enough that you can keep the hotend within 0.5C of your set temperature or less with ease.

NTC 3950 Thermistor parameters:
►Thermistor temperature value table for Marlin
►Small Size: 1.25mmx2.0mm glass bead
►High accuracy: 1%
►Resistance value at 25°C=100K
►Wiring insulation: high temperature teflon/PTFE
►Wiring length: 1 meter

Specification:
►Type: Bowden E3D V6 J-head
►Thermister: 100K NTC

Package include:
►1 x Metal J-Head hotend 1.75mm / 0.4mm nozzle / 12V 40W Heater / NTC3950 Thermistor.
►1 x Heatsink Shroud with High Speed Fan 3010 12V 0.13A
►1 x One Meter long Bowden tubing 4mm OD 2mm ID
►1 x PC4-M6 Straight Fitting

It usually takes 5-14 days to arrive to US by FBM

It usually takes 5-14 days to arrive to US by FBM

Product Features

  • Type: Bowden V6 J-head, Wiring length: 1 meter
  • Metal construction with PTFE liner inside, good for ABS, PLA and other conventional print materials
  • Included: NTC3950 thermistors and 12V 40W heater,High Temperature Peformance.
  • This hotend is equipped with stainless metal heatbreak and with PTFE liner inside heatbreak to reduce extruder jamming.
  • 30 DAY MONEY BACK GUARANTEE- All Torege customers enjoy 30 Day Money Back Guarantee. Customers can return and get refunded in case the purchasing is not satisfactory for any reason. You have no risk to try.

Click Here For More Information