HESAI DRV8825 Stepstick Stepper Motor Driver Module + Heat Sink for RepRad 3D Printer RAMPS 1.4 Controller Replace A4988 (Pack of 5 pcs)

Description:

The DRV8825 stepper motor driver carrier board TI DRV8825 micro bipolar stepper motor drive is a breakthrough. The module has a pinout and interface with our A4988 stepper motor driver carrier is almost the same, so it can be used as a better performance of the pull-down menu board replacement in many applications. DRV8825 features an adjustable current limit, overcurrent and overtemperature protection, six micro-resolution (down 1/32-step). It uses 8.2 – 45 V, can provide up to about 1.5 per phase no heat sink or forced air flow (rated up to 2.2 per volume sufficient additional cooling).

Feature:

A simple steps and direction control interface

Six different steps resolutions: full step, half step, 1/4-step1/8-step1/16-step, 1/32-step

CAN interface directly with 3.3 V and 5 V systems

Over-temperature thermal shutdown, overcurrent shutdown, undervoltage lockout

Short to ground short circuit load protection

4 Layer 2 oz copper PCB, in order to improve heat dissipation

Exposed solder ground below the bottom of the driver IC on the printed circuit board pad

Module size, pin and interface matching A4988 stepper motor driver operators in many ways

Adjustable current control lets you set a potentiometer, which lets you use the stepper motor\’s rated voltage or more, in order to achieve a higher rate of maximum output current step

Intelligent chopping control automatically selects the correct current decay mode (fast decay or slow decay)

Maximum 45 V supply voltage

Built-in voltage regulator (the need for any external logic supply voltage)

Package List:

5x DRV8825 Stepper Motor Driver

5x Heatsink

1x Screwdriver

Product Features

  • This DRV8825 Stepper Motor Driver Module is upgrade of A4988
  • Simple step and direction control interface
  • 4-layer, 2 oz copper PCB for improved heat dissipation
  • Six different step resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step
  • Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor’s rated voltage to achieve higher step rates

Visit The Website For More Information…

Induxpert 3D Pen ABS Filament Refill Pack (Compatible with All 3D Pens)

10 High quality colours for all your 3D prototype drawing and crafting needs. Choose one or use all White, Black, Red, Yellow, Purple, Green, Grey, Gold, Pink and Sky Blue filaments to turn your 3D ideas to life.

1.75mm thick ABS filaments are compatible with 3D printing pens that can load 1.75 mm filaments. Use this with the Induxpert SleekPen 3D Printing Pen for the best results.

Enjoy hours of fun with your kids. Simple and easy to use for all ages and projects. Try it for 90 days, and if you’re not satisfied for any reason, we will accept your returns for a no-questions-asked refund. Add to cart today!

Specifications:

Material: ABS(Acrylonitrile Butadiene Styrene)

Diameter: 1.75mm

Each Length: 10 feet

Quantity: 10 Pcs

Total Length: 100 feet

ABS Print Temperature: 374°F – 518°F / 190°C – 270°C

Recommended Temperature: 410°F / 210°C

Product Features

  • 10 PREMIUM COLORS for all your design projects – White, Black, Red, Yellow, Purple, Green, Grey, Gold, Pink and Sky Blue.
  • 100 FEET OF ABS FILAMENTS – 10 Colors X 10 Feet of Non-toxic, smokeless ABS 3D pen wires for safe family fun and art projects!
  • 1.75mm FILAMENT REFILLS – Compatible with 3D printing pens that use 1.75 mm ABS filaments and the Induxpert 3D pen. High quality wires for smooth loading and an even extrusion every time!
  • USED IN 3D PENS – The recommended melting temperature for these filaments is 410°F. Depending on the printer, these ABS filaments can be printed between the temperature range of 374°F – 518°F.
  • BONUS STENCILS – Receive a FREE book of stencils that you can print and use right away to create 3D artistic masterpieces.

Check Out Our Website For Details…

Pack of 2Meters 2GT Open Timing Belt Width=6mm Rubber With Fiberglass Core for 3D Printer CNC

2GT/GT2 Open Timing Belt 2GT-6 Specs:

Type: 2GT-6
GT2 Pitch :2mm
Belt Height:1.38mm
Tooth Height:0.76mm
Material: Neoprene Rubber With Fiberglass Core
Width:6mm
Length:2meters
Shape:Open ended

The Package Listing Includes as Follow:
Quantity:2meters GT2 Open Ended Timing belt

Product Features

  • Compared with the T2.5 or MXL timing pulley, the GT2 pulley tooth profile is anti-backlash
  • Circular arc Tooth Profile Tooth Space is Small, Suitable for Straight Line Driving
  • GT2 pulley with 20 teeth or grooves is one of the best choices for 3d printer construction
  • Fit for Reprap, Prusa, MendelMax,3D Printer
  • It Gives Better Smoothness and Cccuracy of Positioning

Click Here For More Information

CCTREE 3D Printer Build Surface with 3M Sticker 3D Printer heated bed Sheet for Creality CR-10 CR-10S 300x300mm (Pack of 3)

Size:310mm x 310mm (12.2″x12.2″)
Color:Blue
Background is made of 3M adhesive , easily stick on the heat bed platform

HOW TO USE:

There are 2 methods to attaching the build surface on heatbed:

1. clamp the build surface to the print bed using binder clips(at least 3 clips)

2. Torn off 3M tape on back and stick it on heatbed.

Product Features

  • Size:310mm x 310mm (12.2″x12.2″)
  • Build sheet adheres to a print bed to help the filament stick during printing, while also enabling clean removal of the printed part afterward
  • Compatible with ABS, PLA, HIPS and other filament
  • Single sheet design installs more quickly and with fewer bubbles than tape or films
  • Durable construction allows for multiple uses with either the same or different filament material

Visit The Website For More Information…

EAGY 3D Pen Filament Refills – 1.75mm PLA Material Low Odor 3D Printing Supplies Pack of 20 Vibrant Popular Colors 330 Linear Feet (16.5 ft Each), Applies to any 3D pen!

EAGY! 

Professional R & D and production of 3D printing materials experts come!

You will have full 20 different colors of 3D Pen Refill Filaments!

Guaranteed Safety: These Elastic PLA Filaments are odorless, smokeless and toxic free. They are safe for people with allergies as well. You can be assured that you and your family are safe from any harmful chemicals.

Forget about ABS toxic materials with a strong odor – now you can relax and keep creating without having a single care in this world.

Specification:

Material: PLA (Polylactic Acid). Non-Toxic and Eco-Friendly

Diameter: 1.75mm(Important: This 1.75 mm Filament is not compliant with devices designed for 3.00mm)

Bag Packing: 20 rolls per package

Color: 20 colorful popular colors

Roll length: 5m (16.5ft)

Total length: 100m (330ft)

Temperature Range: 180°C – 210°C (356°F – 410°F)

Please make sure your pen use 1.75mm diameter of 3d pen filament.

Take advantage of the benefits and create something new!

Contact us if you have any problem with the item. We are always here to serve you!

From the Manufacturer 

EAGY is a larger producers of 3D printer filament made from environmental materials. All of the products meet, and more often, exceed the strictest international standards for quality and safety. But behind the innovative designs and meticulous quality lies the even stronger. A collaboration of international and local employees creates a global corporate culture with a particular understanding and respect for the world in which we live. 

Keep Creating Without Limits. Express Yourself With Colorful Shapes. Order Your 3D Pen Refill Filaments Today. Click “Add To Cart” above NOW to take advantage of our lowest price ever!

Product Features

  • 1.75MM PLA FILAMENT: The PLA filaments are useful in a broad range of printing applications which have the advantage of Low-Odor and Low-Warp. Compared with traditional brittle PLA, EAGY 3D printing pen filament have adjusted the degradability of the material for optimal performance, so EAGY PLA filaments are not brittle during 3D printing jobs.
  • 100% ENVIRONMENTAL FRIENDLY: EAGY 3D printing pen filament comply with the Restriction of Hazardous Substance (RoHS) directive and are free from potentially hazardous substances. The 1.75 mm PLA filament gives off a sweet smell, and it is considered by many as an improvement over hot plastic.
  • 20 Colors 3D PLA Filament – Used to draw 3D objects from the paper to real life! This quality PLA printer filament is ideal from your 3D printing needs and suitable for both professional and casual printing jobs. We have a wide range of bright Colors that produce tough and durable prints.
  • 100% SATISFACTION GUARANTEE: EAGY insists on offering best 3D Printing Pen Filament and best customer service for customers. The PLA 3D Printing Pen Filament are backed by EAGY 90 days Money Back Guarantee with 1-Year Warranty. Seize the chance to click “Add to Cart” button right now!
  • 3D art is fun for the family! Put down those tablets and start creating memories together! Unleash your children’s imagination and challenge their minds in new ways as they build in 3D!Your 3D art is special and unique, and that’s why your creations make the perfect gift to friends and family!

Check Out Our Website For Details…