KINGPRINT DC 12V 30A 360W Universal Regulated Switching Power Supply for 3D Printer, CCTV, Radio, LED Strip Lights,Computer Project

Basic requirements: 12V 30A 360W
Rated voltage range: 110-220VAC
Input voltage range: 110-220V
Input frequency range: 47 ~ 63Hz
Input voltage protection: 115 ~ 150% intermittent mode
Input voltage recovery: automatic recovery
Impact current: ≤1%
Machine efficiency: ≤ 0.5%
Output voltage range: 12V ± 0.5%
Output current: 30A
Ripple and noise: ≤100 mVp-p
Rise time: ≤50ms
Voltage regulation rate: ≤0.5%
Load regulation: ≤1%
Output over-current protection: current sag type
Output short circuit protection: IGBT
Output over-voltage protection: soft-start protection
Insulation resistance: > 50MΩ
High-quality materials, heat-resistant, dust-proof and moistureproof, flame-retardant, built-in cooling fan, safe and reliable, can guarantee better cooling effect, the service life of up to 20,000 hours

NOTE:
* This product is not waterproof, please be careful when you use it.
* This Power Supply is only suitable for indoor use, non-detachable power shell.
* Don’t place other items in the product range of 5 cm, to ensure the powersupply with good thermal environment and safety.
* Carefully verify the power link is correct rigorously, power lines reversed before use it. Don’t touch the case during the power is working.
* Don’t place other items in the product range of 5cm, in the range of 50cm within the outlet Do not place other flammable items.
* Do not short-circuit output if no output, please use off one minute re-energized.
* Professional installation of qualified electrician is highly recommended.
* If the power supply is defective, please contact us at first.

Package Included:

1 * 12V 30A Power Supply

Product Features

  • Dimensions: 21.5 * 11.5 * 5.0 cm /8.46*4.53*1.97 inch (L*W*H)
  • Operating temperature: -10 ℃ ~ +50 ℃, 20% ~ 95% RH (no condensation)
  • Storage temperature: -20 ℃ ~ +85 ℃, 20% ~ 95% RH (no condensation)
  • Temperature coefficient: 0.02 ~ 0.05% / ℃
  • Cooling method: fan cooling

Click Here For More Information

JoyNano 240W Switching Power Supply 24V 10A AC-DC Converter Transformer for 3D Printer, CCTV Surveillance LED Display Industrial Automation Stepper Motor and More [Upgraded Version]

JoyNano – Enjoy Gadgets and Electronics

Description:
1. The JoyNano 24V 10A Switching power supply is great electronic devices that operate on 24VDC and require less than 240W of power.
2. Constant voltage output to ensure the stability of the power supply. Efficient work and low temperature.
3. Input voltage 110V/230V is selected by switch. Before power on please check input voltage avoiding damage.
4. Safety Protection: Overvoltage protection, short circuit protection and overload protection. Hiccup mode, recovers automatically after faulty condition is removed.
5. Upgraded Glass-Fiber Board offers high performance of electrical insulation. Premium Transformer converts incoming line voltage to desired output load easily.

Specifications:
Input Voltage: AC110V/ 220V
Output Voltage: 24V DC
Output Current: 10A
Power: 240W Max
Screw Terminal Number: 9
Cooling: By free air convection.
Shell material: Aluminum case
Dimension: 200 x 110 x 50 mm (L x W x H) 7.8 x 4.3 x 1.9 inch
Net Weight: 690g 1.5lb

Wiring:
L, N, GND: AC power input
+V: DC power output “+”
-V: DC power output “-“
+V / ADJ: fine adjustment of output voltage

Environmental Requirement:
Working temperature: -10 to 50 degree Celsius
Storage temperature: -20 to 60 degree Celsius
Environmental humidity: 10-95%

Usage:
Switching Power Supply Driver for 3D Printer, LED Strip Light, CCTV Surveillance, Industrial Automation, CNC Stepper/Servo System, DSP controller, LED Decorative Lighting, LED Display, Stage Lighting, Communications, Network, etc.

Notice:
1. In-door use only.
2. Professional Installation of qualified electrician is highly recommended.

Package Included:
1 x JoyNano 240W Switch Power Supply 24V 10A

Product Features

  • Converts AC voltage to 24V DC. LED Indicator.
  • Output Current 10 Amp, Power 240 Watt. Efficiency more than 80%.
  • Smart device surge protection for Shortage Protection, Overload Protection, Over Voltage Protection
  • Widely used in 3D Printer, Industrial automation, LED display, communications, CNC Stepper, etc
  • Efficient, long life, stable, and reliable – JoyNano Quality Warranty

Click Here For More Information

GALYGG DC 12V 33A 400W Switching Power Supply,for LED Strip Lights,Electronic Equipment,Computer Project,3D Printer

Parameter

– Watts: 400W
– Input Voltage: AC110V-220V
– Output Voltage: DC 12V
– Output Current: 33A
– Frequency: 50/60Hz
– Shell Material: Aluminium

Application

– Only indoor use, non-waterproof.
– High quality material, durable and safety in use.
– Great switching power supply for home appliances.
– A new style Switching Power Supply which can keep the voltage stability.

Attentions

1. When the power supply is working, please do not touch it.
2. This product is suitable for indoor use, non-detachable power shell.
3. Please DO NOT let the unit work long hours over rated current! Normally it is better to work under 80% of rated current.
4. External power supply round hole mesh heat vents, in the range of 50cm within the outlet,do not place other flammable items.

Product Features

  • High safety performance, with short circuit, overload, over voltage, protection function.
  • The DC ripple is small, the power supply efficiency is high, and the electromagnetic interference is low.
  • Low working temperature, long service life. Wide input voltage range, in line with global standards.
  • Compatible with 110V/220V, need to adjust the switch before use, select the correct input voltage stalls.
  • High quality Switch Power Supply widely used in Industrial automation, LED display, communications, etc.

Click Here For More Information

PHEVOS ac110v to12v 250 Watt Dc Universal Switching Power Supply for 3D Printer, CCTV, The monitoring system,ham Radio Transceiver, Car Audio Amplifier, Computer Project and LED Strips


Descriptions: DC 5V 20A LED Switching Power Supply, a reliable switching power supply with high quality material, durable and safety in use. A new style Switching Power Supply which can keep the voltage stability. Great switching power supply for home appliances. Universal AC input/full range, cooling by free air convection. Full load burn-in test.

Features:
DC 5V 20A Switching power supply, convert AC 110/220V to DC 5V.
Compact small size, high efficiency and stable performance.
Metal housing, good heat dissipation, built-in indicator light.
With overload and short circuit protection.
Wide input voltage range, steady and precise output voltage.
Mainly used for CCTV camera, LED flexible strip, LED decorative lighting, street light, building lighting, stage lighting, LED display home appliances and so on.

Specifications:
Product Name: LED Switching Power Supply
Model: S-100-5
Safety Compliance: CE, RoHS
Input: AC110V/220V(+/-15%)
Output: DC 5V 20A
Rated Power: 100W
Screw Terminal Number: 5
Material: Metal, Electronic Parts
Fix Screw Hole Diameter: 2.5mm(0.1 inch)
Main Color: Silver Tone

Product Features

  • Input:You can choose the input voltage (110V/240V) by switch.The input is 110/240volts AC and the output is DC 12V 20A
  • Protection: Shortage Protection, Overload Protection, Over-voltage Protection:115%-135%,Action output cut-off Reset:Auto Reset or fuse.
  • Application:High quality Switch Power Supply Widely used in Industrial automation, LED display, communications, etc.
  • Smart device surge protection for Shortage Protection, Overload Protection, Over Voltage Protection.
  • GUARANTEE. 1 Year manufacturer 100% money back guarantee warranty!

Click Here For More Information

RepRapChampion 3D Printer Heated Bed Power Module High Current 210A MOSFET upgrade Anet A8, TEVO Tarantula and others

This listing is for one power module for controlling 3D printer heated bed, it is also can be used to drive other non-inductive loads. If you plan to use silicone heater of large area heated bed, you most likely will overcome limitations for the current, that can handle your current 3d printer electronics. This control board will handle high current without even getting warm. Oversize MOSFET and overall very robust PCB design will allow for trouble free operation without active cooling.

Heated bed power module features:

Based on powerful MOSFET HA210NO6.
Dimensions: 60x50mm.
Mounting holes: 3.2mm diameter, for M3 screws.
Distance between holes: 54x43mm.
Very powerful MOSFET to withstand higher current than normal RAMPS or other 3D Printer controller can handle.
Voltage: 12V-24V.
Maximum current with active cooling: 210A.
Current: 50-80A safe for prolonged times without active cooling.
This module is based on power MOSFET and will allow PID control of the heated bed (DC-DC Relays usually do not allow this).

Package contents:

1 x Heated Bed Power Module.
1 x Connection cable for input signal.

Product Features

  • Safe and reliable way to handle high current heate bed on 3D Printer
  • Easy to install and connect with supplied connection diagram
  • It will not overheat under normal load
  • Active cooling is not required but recommend

Detailed Information available on our Homepage…