RepRap Champion MK2B PCB HeatBed Heat Bed RepRap 3D Printers pre-wired for 12V SMT LED soldered

MK2B comes with pre-soldered SMT LEDs and wiring. PCB pre-wired for 12V power.

Specifications:

Outer Dimensions: 214mm (8 7/16 in) x 214mm (8 7/16 in)
Dimensions between holes: 209 x 209mm
Laminate FR4 1.6+-0.15mm
2 Layer, 35µm Copper
White Soldermask – Both Side
Black Silkscreen – Both Side
Power Input: 12V/24V DC
Copper Plated Holes
Wiring length: 700mm

Package contents:

1 x MK2B PCB Heated Bed pre-wired for 12V power.

Product Features

  • Popular MK2B 200x200mm dual power heated bed design
  • Compatible with most Prusa i3 variations, Mendel, Mendelmax and plenty of other 3D printers
  • Power rating is 120 Watt under 12V
  • Power wiring is included in the kit, length of wires 0.7 meter

Detailed Information available on our Homepage…

Inkbird Pre-Wired 308S + 1.97” Replaceable NTC-5cm Probe Digital Dual Stage Temperature Controller 110V 1000W for Aquarium Heaters,Reptile,Hatching etc.


Features:
Temperature Control Range : -50~99 °C / -58~210 ° F
Temperature Resolution: 0.1 ° C / 0.1° F Temperature
Accuracy: ±1°C (-50 ~ 70°C) / ±1°F (-50 ~ 160° F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V ~240V AC
Buzzer Alarm: High and Low Temperature Alarm
Dimension Body: 140x68x33mm (5.5×2.7×1.3inch)
Socket: 85x42x24mm(3.3×1.7x1inch)
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Ambient Temperature: -30~ 75 ° C / -22~ 167 ° F
Storage Temperature: -20~ 60 ° C / -4~ 140 ° F
Humidity 20~85% (No Condensate)
Warranty: 1 Year

Package Content:
1x ITC308S Temperature Controller;
1x 1.97”Stainless Steel Probe
1x English Manual

About Probe:
This temperature probe can be submersed into aquarium direclty.
No need to worry about inserting a smaller probe into a separate thermowell temperature probe.
It’s compatible with INKBIRD’s following controllers:ITC-308,ITC-306T,ITC-310T.

Product Features

  • 110V 1000W
  • Plug and play design, easy to use
  • ℃ / ℉ Display can be chosen
  • Easy to set your parameters
  • Heating and Cooling differential function could be set separately

Detailed Information available on our Homepage…

TOOTO 3 PCS 100Kohm NTC 3950 Thermistors with Teflon Insulated Wiring for RepRap Prusa 3D Printer Extruder or Heated Bed pre-wired


Lot of 3 pcs NTC 3950 thermistors. Thermistors have been pre-wired for your convenience with 1 meter teflon insulated wires.

NTC 3950 Thermistor features:

– For 3D printers: use TEMP_SENSOR 11 in Marlin firmware
– Small Size: 1.25mmx2.0mm glass bead
– High accuracy: 1%
– Resistance value at 25¡ãC=100K
– Wiring insulation: high temperature teflon/PTFE
– Wiring length: 1 meter

Package contents:

– 3 x NTC 3950 100k Thermistor assembled with 1 meter teflon wiring.

Product Features

  • Support for NTC 3950 is included in Marlin firmware, use TEMP_SENSOR 11 in firmware configuration
  • Conviniently pre-wired with 1 meter long high temperature teflon insulated wiring
  • Use it with heated bed or extruder
  • Cable length :1m
  • Temperature sensor 100K¦¸ accuracy of ¡À 1%

Detailed Information available on our Homepage…

[3D CAM] 3 PCS NTC3950 Thermistors for RepRap 3D Printer Extruder or Heated Bed pre-wired with Teflon Insulated Wiring

Lot of 3 pcs NTC 3950 thermistors. Thermistors have been pre-wired for your convenience with 1 meter teflon insulated wires.

NTC 3950 Thermistor features:

– For 3D printers: use TEMP_SENSOR 11 in Marlin firmware
– Small Size: 1.25mmx2.0mm glass bead
– High accuracy: 1%
– Resistance value at 25°C=100K
– Wiring insulation: high temperature teflon/PTFE
– Wiring length: 1 meter

Package contents:

– 3 x NTC 3950 100k Thermistor assembled with 1 meter teflon wiring.

Product Features

  • Conviniently pre-wired with 1 meter long high temperature teflon insulated wiring
  • Popular low cost thermistor for RepRap 3D printers
  • Use it with heated bed or extruder
  • Support for NTC 3950 is included in Marlin firmware, use TEMP_SENSOR 11 in firmware configuration

Detailed Information available on our Homepage…