220x220mm Flex Magnetic Print Bed Tape Hot Bed Sticker Build Surface Tape w/Adhesive Backing F/Wanhao i3, ANET A8 A6 Prusa i3 3D Printer

Package:

1piece A + 1piece B sticker

Advantage: 1. use again and again. More money. 2. separation type bending to take the model. It’s more convenient. 3. do not need the beauty of paper and scraper to assist the model. 4. can be installed on a hot bed and a glass platform. 5. print not warped edge. No glue is needed. 6. can be printed on cold bed 7.The A plate is flexible, frosted and magnetic, it is easy to move away from build platform and take away printed models 8. The A B plates are flatness 9.It can print a variety of materials such as PLA and so on.

Product Features

  • Backing: B with 3M backing
  • Size: 220mm x220mm
  • Please level the build plate well before printing
  • Please do not let heated nozzle touch the A plate directly !
  • Because of the material of the product, it is recommended that the temperature of the hot bed should not exceed 80 degrees.

Click Here For More Information

3D printer NTC Thermistor Temp Sensor 100K for Reprap Prusa i3 Comgrow

Package included: 5pcs thermistors
Application : Heated bed or extruder of Reprap Prusa I3 3D Printer
Resistance value at 25°C=100K
Thermistor: small size 1.25mmx2.0mm glass bead
Wiring insulation: high temperature Teflon/PTFE.

Product Features

  • Use for heated bed or extruder
  • It has 2 pin female connector
  • Wire length: 1m/39.4 inches
  • Package include: 5 thermistors
  • Temperature sensor 100KΩ accuracy of ± 1%

Detailed Information available on our Homepage…

[Sintron] 3D Printer Plastic Printed Part Frame Kit for MK8 Extuder Reprap Mendal Prusa i3

This is the excellent and popular version of the Prusa i3 Acrylic Frame 3D Printer, This kit comes with the following parts in PLA. These are the parts you’ll need to complete your Prusa i3, As the picture, what you see will be what you get.

Overview:

PLA, Polylactic Acid, is created from processing a number of plant products.
PLA can be composted at commercial facilities unlike ABS which is derived from fossil fuels, Our fine grade PLA filament (Poly Lactic Acid) is derived from corn starch and is biodegraded in an active compost heap. We recommend PLA for beginners as its more forgiving and easier to work with as it cools & sets faster reducing warpage.

PLA is a more earth friendly plastic. It is stronger and more rigid than ABS, and in general the printed objects will have a more glossy look and feel compared to ABS, unlike ABS, PLA can be sanded and machined.

Features:

(1) PLA has a lower melting temperature compared to ABS.
(2) As a material, PLA has much less warping versus ABS. Additionally, a heated bed is not required to print it.
(3) PLA plastic is a much harder plastic compared to ABS. With PLA your printer will flex less and your gears will last much longer.

Package list:(Bolts and Nuts included)

1 Pcs X carriage for 8mm smooth rod and LM8UU bearings
3 Pcs Clamp style endstop holders
1 Pcs X end idler for 8mm smooth rod and LM8UU bearings
1 Pcs X end motor for 8mm smooth rod and LM8UU bearings
1 Pcs Y belt holder
1 Pcs Y idler bracket
1 Pcs Y motor mount
1 Pcs Extruder mount for MK8 extruder
3 Pcs Y bushings for 8mm smooth rod and LM8UU bearings
4 Pcs Y corners for 8mm threaded rod

Product Features

  • (1) PLA has a lower melting temperature compared to ABS.
  • (2) As a material, PLA has much less warping versus ABS. Additionally, a heated bed is not required to print it.
  • (3) PLA plastic is a much harder plastic compared to ABS. With PLA your printer will flex less and your gears will last much longer.
  • (4) PLA generally enjoys sharper details and corners compared to ABS without the risk of cracking or warping. PLA can also be printed at higher throughput speeds.
  • (5) These are the parts you’ll need to complete your Prusa i3, 17 unit plastic printed Parts with bolts and nuts included.

Visit The Website For More Information…

WINGONEER 5PCS Aluminum GT2 Timing Belt Pulley 20 Teeth Bore 8mm Width 6mm and Wrench for RepRap 3D Printer Prusa i3

WINGONEER 5PCS Aluminum GT2 Timing Belt Pulley 20 Teeth Bore 8mm Width 6mm and Wrench for RepRap 3D Printer Prusa i3

Features:
20T 8 mm bore aluminum GT2 timing belt pulley
Applies to 6 mm width belt
Two screws are provided for each synchronous pulley and already have been screwed in the pulley
Adopt high quality aluminum, excellently machined, Finished smoothly
Perfect choice for building a 3D printer or similar projects

Specifications:
Tooth: 20T
Bore: 8mm
Belt Width: 6mm
Material: aluminum

Package Includes:
5 x WINGONEER Aluminum GT2 Timing Belt Pulley
1 x Allen Key

Product Features

  • 20T 8 mm bore aluminum GT2 timing belt pulley
  • Applies to 6 mm width belt
  • Two screws are provided for each synchronous pulley and already have been screwed in the pulley
  • Adopt high quality aluminum, excellently machined, Finished smoothly
  • Perfect choice for building a 3D printer or similar projects

Visit The Website For More Information…

CHPOWER 12V 40W 620 Ceramic Cartridge Heater and NTC Thermistor 100K 3950 for 3D Printer Creality CR-10 CR-10S S4 S5 Makerbot RepRap Prusa i3 (Pack of 10)

Cartridge Heater:

● Cartridge heaters is consist of a cylindrical stainless steel tube and thus provide a high corrosion prevention
● The heating wire inside which is wound onto a ceramic core
● The number of coils varies depending on the power, and provide a great uniform distribution of heat, which considerably increases the long life of the heater as well as prevents the oxidation of the heater wire even at high temperatures
● The solids, liquids, and gases need to be heated by cartridge heater, transmit heat quickly by conduction if the producer of the heat (the cartridge) is in direct contact with the heat sink (any solid, liquid, or gas)

Cartridge Heater Application:

● Widely used for manufacturing plastic and rubber parts in the car industry or in the food processing industry, etc
● Semiconductor chamber heating, semiconductor wafer lead connection, semiconductor wire and die bonding
● Freeze protection and deicing of equipment in cold climates or applications ● Humidity Control
● Patient Comfort heating used in medical devices
● Mold die and platen heating
● Seal bars used in packaging equipment
● Test sample heating in gas chromatography

Thermistor Specification

● For 3D printers: use TEMP_SENSOR 11 in Marlin firmware
● Small Size: 1.25mmx2.0mm glass bead
● High accuracy: ±1%
● Resistance value at 25°C=100K
● Wiring insulation: high temperature teflon/PTFE
● Wiring length: 1 meter
● Operating temperature range: -40 ° C … + 300 ° C
● Dissipation power factor: ≥ 5MW / ° C (static air)
● Rated power: 45MW
● Thermal time constant ≤ 7S (static air)
● Temperature Coefficient of Resistance; -2-5% / ° C

Included:

5x 12V Cartridge Heater with 1.0m Wire
5x NTC Thermistor 3950 100k
1x Allen Wrench

Product Features

  • Cartridge Heater Material: 304 Stainless Steel, Voltage: 12V, Power: 40W. Conveniently pre-wired with 1 meter long high temperature Teflon insulated wiring
  • Thermistor Color: White, support for NTC 3950 is included in Marlin firmware, use TEMP_SENSOR 11 in firmware configuration. Temperature sensor 100KΩ accuracy of ± 1%
  • The number of coils varies depending on the power, and provide a great uniform distribution of heat, which considerably increases the long life of the heater as well as prevents the oxidation of the heater wire even at high temperatures .
  • Cartridge heater is consist of a cylindrical stainless steel tube and thus provide a high corrosion prevention.
  • CHPOWER is a TRUSTED VENDOR, we provide 12-month manufacturer warranty on all parts. Buy with confidence.

Detailed Information available on our Homepage…