fosa 3D Printer Part 241815mm Silicone Shock Cover, Blue Heater Block Protective Cover Case for 3D Printer Part V6 PT100

Description:
This protective cover is specially designed for V6 PT100 aluminum block to ensure the heater block clean and keep temperature stability. Silicone material has great property of heat resistance and extensibility.

Specifications:
Condition: 100% Brand New
Material: Silicone
Color: Blue
Fit For: V6 PT100 Aluminum Block
Outer Size: approx. 2.5 x 2 x 1.5cm / 1.0 x 0.8 x 0.6in
Weight: approx. 4g

Package Included:
1 x Silicone Case(Aluminum Block not included)

Product Features

  • It adopts silicone material, it features high temperature resistance and non-stick
  • Efficiently keep your heater block clean
  • Helps to keep the hot end temperature extremely stable
  • The silicone cover will fit the hot end snugly because of the extensibility of silicone when hot
  • Well designed for protection and accessibility due to its reserved notches

Visit The Website For More Information…

WINSINN 3D Printer J-head V6 Hotend Extruder Kit – High Speed Volcano Upgrade + Sensor Copper heater block 0.4mm Copper & Stainless steel Nozzle For PT100 1.75mm Filament

►This is The latest V6 kit, replacement parts is very easy, so you can easily upgrade your printer. High-quality stainless steel nozzle + copper heating block + TC4 titanium alloy, you can ultra-high temperature printing. Let’s try it :)))

 

—————————————————————————————————————

 

►TC4 titanium alloy: TC4 titanium alloy material composition is Ti-6Al-4V, (a + b) type titanium alloy, It has good mechanical properties, specific strength. TC4 strength sb = 1,012MPa, density g = 4.4 x 103, specific strength sb / g = 23.5, while the specific strength of alloy steel sb / g is less than 18. Titanium alloy has low thermal conductivity. Titanium alloy thermal conductivity 1/5 of steel , 1/13 of aluminum, 1/25 of copper , TC4 thermal conductivity l = 7.955W / m.K. The above data is only for reference.

 

—————————————————————————————————————

 

►Sensor heater block is the 2016 new V6 heater block, it compatible with PT100 sensor, size 23*16*12mm

►Copper heater block is The latest heating block, suitable for ultra-high temperature printing, size 22*16*11.5mm

 

—————————————————————————————————————

 

Package include:
►1 x High quality copper + stainless steel 1.75mm-0.4mm nozzle
►1 x High quality copper + stainless steel 1.75mm-0.4mm Volcano Sharp nozzle
►1 x High quality Standard V6 + Volcano +Copper heater block
►1 x TC4 titanium alloy + 4.1mm Bore Heat Break
►1 x V6 Aluminum alloy Radiator + PC4-01 Pneumatic fittings
►1 x Heatsink Shroud + High Speed 3010 Fan 12V 0.1A 9000±RPM
►1 x 12V 40W 1m Heater Cartridge Cable + NTC 100K 3950B Temperature sensor
►2 x Allen wrench + 4 x Fan fixing screw

Product Features

  • Emergency Notice: Recently some customer feedback that V6 heat sink had the thread error, the heat sink in the kit is M6 thread, it can not be used. We are very sorry about this problem. This is our mistake. We apologize to all customers. If you have received a problem product, don’t worry. Contact us immediately, keep your product, we will re-send to you immediately for free. Thank you!
  • TC4 Titanium alloy Heatbreak – Ultra-low thermal conductivity, Make sure the printer stable operation.
  • 3 Models of heater blocks, upgrade your printer, experience the latest high-temperature printer technology.
  • High quality International copper nozzle + stainless steel nozzle (1.75mm-0.4mm)
  • Suitable use for Remote and 1.75mm Filament. With Heatsink Shroud + High Speed 3010 Fan, the fan 0.1A 9000+-10%RPM

Click Here If You Need More Detailed Info…

WINSINN Chimera Hotend Extruder Full Kit – High Speed Volcano Upgrade + Sensor Copper heater block 0.4mm Copper & Stainless steel Nozzle For PT100 1.75mm Filament

►This is The Chimera Extruder Full kit, replacement parts is very easy, so you can easily upgrade your printer. High Speed Volcano Upgrade + High-quality stainless steel nozzle + all-copper heating block + TC4 titanium alloy, you can ultra-high temperature printing. Let’s try it :)))

 

—————————————————————————————————————

 

►TC4 titanium alloy: TC4 titanium alloy material composition is Ti-6Al-4V, (a + b) type titanium alloy, It has good mechanical properties, specific strength. TC4 strength sb = 1,012MPa, density g = 4.4 x 103, specific strength sb / g = 23.5, while the specific strength of alloy steel sb / g is less than 18. Titanium alloy has low thermal conductivity. Titanium alloy thermal conductivity 1/5 of steel , 1/13 of aluminum, 1/25 of copper , TC4 thermal conductivity l = 7.955W / m.K. The above data is only for reference.

 

—————————————————————————————————————

 

►This is the Sharp Volcano Nozzle for upgrade version. Nozzle Ensure Concentricity and Roundness.

►Copper heater block is The latest heating block, suitable for ultra-high temperature printing, size 22*16*11.5mm

 

—————————————————————————————————————

 

Package include:

►2 x High quality copper + stainless steel 1.75mm-0.4mm V6 nozzle
►2 x High quality copper + stainless steel 1.75mm-0.4mm Volcano Sharp nozzle
►2 x High quality Standard V6 + Volcano +Copper heater block
►2x TC4 titanium alloy + PTFE Teflon Heat Break
►1 x Aluminum alloy Heat sink + PC4-01 Pneumatic fittings
►2 x 12V 40W 1m Heater Cartridge Cable + NTC 100K 3950B Temperature sensor
►1 x High Speed 3010 Fan 12V 0.1A 9000±RPM
►2 x Allen wrenc

Product Features

  • Can extrude 2 different filaments at the same time!
  • TC4 Titanium alloy Heat Break – Ultra-low thermal conductivity, Make sure the printer stable operation.
  • 3 Models of heater blocks, upgrade your printer, experience the latest high-temperature printer technology.
  • High quality International copper nozzle + stainless steel nozzle (1.75mm-0.4mm)
  • Made by WINSINN

Visit The Website For More Information…