3D Printing Failures: How to Diagnose and Repair All 3D Printing Issues

Whether you are new to 3D printing, or you have dozens of successful prints under your belt, this book is going to help you!
Sean Aranda and David Feeney have hundreds of thousands of successful 3d printing hours combined, so let them help you achieve consistent clean prints.
The failures that are discussed in great detail by chapter are:
• Bed Adhesion
• Build Plate Not Heating
• Build Plate Not Reading Correct Temperature
• Built Up Material in Nozzle
• Extruder Stepper Skipping
• Filament Snapping
• Hotend Can’t Reach or Maintain Temperature
• Hotend Not Heating
• Hotend Not Reading Correct Temperature
• Layer Shifts
• LCD Blank or Dark
• Model Errors
• Not Finding Home
• Nozzle Clogs
• Over Extrusion
• Parts Not Mating Together
• Print Pauses Mid Print
• Running Out of Filament
• Settings Issues
• Stepper Motors Overheating or Malfunctioning
• Stripped Filament
• Unlevelled Build Plate
• Warping
• Z-Axis Wobble
• Z-Height Issues
• And much more!

Click Here For More Information

BHY Heating Block Aluminum Replacement Part Repair Accessory for MK10 3D Printer

Heating Block Aluminum Replacement Part Repair Accessory for MK10 3D Printer
Before you buy it, please make sure you know how to use it, thanks.

Compatible:For MK10 3D Printer

Package included:
1x heating block

Note:
Only one heating block,the nozzle is not included.

Product Features

  • Brand new and high quality.
  • Compatible for MK10 3D Printer
  • Package included: 1x heating block
  • Before you buy it, please make sure you know how to use it, thanks.
  • Note: Only one heating block,the nozzle is not included.

Visit The Website For More Information…

Ake 10x10mm Towline Drag Chain Plastic Replacement Repair Part Accessory for 3D Printer

10*10mm Towline Drag Chain Plastic Replacement Repair Part Accessory For 3D Printer.

Before you buy it, please make sure you know how to use it, thanks.

Product features:
Material:plastic
Length:1m
Inner hole:10*10mm

Compatible:For 3D printer

Package included:
1x towline

Product Features

  • A good replacement part.
  • Material:plastic
  • Length:1m, Inner hole: 10 x 10mm
  • Compatible For 3D printer
  • Package included: 1x towline

Visit The Website For More Information…

Deluxe 50 Screwdrivers & Spudgers DIY Repair Anything Electronic Tool Kit for iPhone, MacBook, Smart Cell Phone with Security: Pentalobe TriPoint Y Torx Triangle Spanner Hex PH000 Tweezers, Pry Puck

Do It Yourself (DIY) and save. This includes everything you need for almost any small electronics repair from cell phone to laptop or tablet to gaming system. The photos show the quality of finish and manufacture of these tools. The 42 bit screwdriver fits almost anything, including cell phones, pads, laptops, tablets, game box controllers, and almost anything else. It is quality made from hardened steel with a comfortable rubber handle, plus it has flex and straight extensions. The Black stick nylon spudger tool is what most Apple professionals use to open iPhones and are excellent for small batteries, automobile lights, and other plastic cases. Made of special nylon reinforced plastic to prevent scratching or chipping. The photo shows both ends of this handy tool with different shapes on each end for a non-mar pry bar, cable release, or probe. Approx 6in long, the flat tip is 1/4in wide and they are heat resistant for soldering jobs. The metal ones are used for cases that require more leverage or a sharper tip. The flat metal one is also handy for glued on LCD screens, and heavier prying. Both are highly polished to prevent scratching plastic surfaces.

Bits included: Nut Diver Bits: M2.5, M3, M3.5, M4, M4.5, M5 M5.5 Torx Bits: T3,T4, T5, T6, T7, T8,T9, T10, T15 & T20 The Torx above T8 to T20 are Security (TR8 TR9 TR10 TR15 TR20) Flat Tip screwdriver Bits: 1, 1.5, 2.0, 2.5, 3.0 3.5 4.0 Phillips (cross) Bits: 1.5, 2.0, 2.5, 3.0 & 4.0 5-star Pentalobe Bit: 0.8mm (TS1 or P2) Hex Bits: H0.9, H1.3, H1.5, H2.0, H2.5, H3.0, H3.5 H4.0 Other Tips: U2..6 (Spanner), Y Bit 2.0, Triangle 2.0, Probe 1,5mm

Product Features

  • Quality Mini/Micro tool kit has what you need for almost any small electronics repair
  • Includes fine tip non-mar spudger pry tools, tweezers, pry puck, Apple screwdrivers and more
  • 42 different mini/micro screwdriver bits/tips: Torx Hex Phillips Flat Triangle Spanner & 5 point star
  • Everything you need for DIY repair on telephones, tablet, pad, laptop, game controllers and other electronic devices
  • One year replacement warranty on factory defects and workmanship. Note that the nylon pry tools are soft so as to be non-mar. No replacements for breakage due to heavy prying, please use the appropriate tool.

Click Here If You Need More Detailed Info…

HEATED 3D PRINT FINISHING TOOL with 4 specially coated interchangeable tips designed to FINISH, REPAIR and MODIFY 3D printed parts.

3D printers are fantastic things! Producing some great looking parts straight off the printer. However, if you actually own a desktop 3D printer you will know that this isn’t always the case and all kinds of printing errors can creep in. Removing support material can sometimes be a pain and what if you need to modify the part after printing? You won’t want to print the whole thing again if it can be avoided!… This is where the MODIFI3D Finishing Tool steps in. MODIFI3D offers a low cost solution to Finish, Repair and Modify 3D printed parts. What is MODIFI3D? MODIFI3D is a heated tool with specially coated interchangeable tips designed to finish, repair and modify 3D printed parts. MODIFI3D Is designed to replace much of the sanding, scraping and snapping to finish off your 3D prints. The pen like form of MODIFI3D makes it very comfortable to use and extremely easy to control when precision is important. MODIFI3D works with PLA, ABS and other 3D printing materials. Print your own EXTENDED Tool holder at Thingiverse OR My Mini Factory. MODIFI3D Specs: 5V 8W USB 2.0 or USB 3.0 recommended Size: 15mm (0.6″) x 117mm (4.6″) excluding tips Weight: 120g (4.3 oz) Cable: 1.5m (59″) long to USB A plug Heats up to 300ºC (572ºF) in less than 15 seconds. Maximum temperature of 420-450ºC (788-842ºF)

Product Features

  • USB (2.0/3.0) Powered, Rapid heat up (15 secs), fast cool down (30 secs), Sleep mode.
  • 4 interchangeable tips – Needle, knife, scoop and point tips. Special coating to prevent sticking.
  • The pen like form of makes it very comfortable to use and extremely easy to control.
  • Touch Switch, Indicator Light, simple & easy to use, light weight & compact, stand included.
  • See below full description below for full info and technical spec.

Visit The Website For More Information…