Hillside-kit Pen Nozzle for 3D Printing Pen 0.7mm Printer Head Part Replacement Integrated Inserted Design Easy Install Work for 1.75mm ABS/PLA (Black) (Pen Nozzle)

Hillside-kit 3D Printing Pen njector Head Nozzle For 2nd Generation
Descriptions :
Used for 1.75mm ABS & PLA filament
Heating temperature: 70-80℃
Nozzle Diameter: Approx. 0.7 mm / 0.28 “
Nozzle Total Length: Approx 1.5cm
Material :non-metal aerial material
Color : Black

Package Includes :
1 x Nozzle for 3D Printer Pen

Note : Please check your original 3D Printer Pen Nozzle before placing the order. Please be sure the specifications above and its appearance are the same. Then it will meet your needs. 

Product Features

  • Integrated inserted design make this nozzle easier to be replaced. You could just press the buckle lightly and the nozzle will be disassembled.
  • If the nozzle is jammed, you could remove and clean it at any time with easy access.
  • The temperature of the nozzle could reach no more than 70-80℃, which could prevent you from scald in accident.
  • Safety design with non-metal aerial material makes you feel relieved during your printing time.
  • The nozzle of 3D printing pen belongs to perishable items, choose from reliable supplier

Visit The Website For More Information…

CHPOWER CR-10 Extruder Upgraded Replacement, Aluminum MK8 Drive Feed 3D Printer Extruders for Creality CR-10, CR-10S, CR-10 S4, CR-10 S5, RepRap Prusa i3, 1.75mm

Description:

This modified MK8 Extruder has a filament guide tube, all screws, spare drive gear, and upgraded Bowden tube fitting, for CR 10 3D Printer. Our design gives complete support of flexibles from the intake and output ends. We’ve reduced the price and complexity of printing flexibles. It will also allow to print faster with sustained quality and no risk for grinding the filament.

Frankly, it looks amazing, and performs better than the plastic version included in stock printers. It allows you to print flexibles, and regular plastic filaments.

Also included is an upgraded bowden tube fitting, which does not slip, as the stock one can. Every screw and washer we would recommend for this installation is included.

Features:

● This extruder set is great for Creality 3D CR-10.
● Made of high quality metal material.
● Easy and convenient to use.
● With high quality and durable performance.
● 100% brand new and in good condition.
● Color: As pictures show.
● Main material: Metal

Included:

1x Creality 3D – Extruder Upgrade Kit

Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Product Features

  • UPGRADE: Original MK8 extruder aluminum for Creality 3D Printers CR-10 Series, CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus. Upgrade your Creality 3D Printer Extruder with our New “Metal Anodised Aluminum” Upgrade Kit.
  • STABLE and DURABLE: Full metal aluminum alloy, DIY kit and you need to assemble by yourself. Our MK8 extruder hotend include all the necessary screws & parts needed to directly replace your old original weak Creality plastic extruder.
  • EASY TO INSTALL: All you do is unbolt the old original Creality plastic extruder & screw in the new “Metal Extruder” and ready to start printing. Used for 1.75mm filament of 3D printer MK8 bowden extruder frame.
  • ADVANTAGES: The advantages of our extruder drive is you have better stronger pressure pushing the filament into the printer nozzle and so will improve on the printers’ performance. Our extruder kits have an adjustable bolt so that you can adjust the pressure of the extruder gear as needed.
  • Trusted Vendor: CHPOWER is a TRUSTED VENDOR, we provide LIFETIME manufacturer warranty on all parts. Buy with confidence.

Visit The Website For More Information…

SIMPZIA Heat Bed Power Module General Add-on Hot Bed Power Module Expansion Board High Current Load Module Mos Tube Hotend Replacement with Cables for 3D Printer – 2 Pack

Heated Bed Power Module Features:
Based on powerful MOSFET HA210NO6
Dimensions: 70 x 45mm/ approx 2.76 x 1.77″
Distance between holes: 62.8 x 37.8mm/ approx 2.47 x 1.49″
Supply/Operating Voltage: 12V-50V (12-24VDC recommended)
Max Current: 25A (Enhance heat dissipation) safe for prolonged times. ensure active cooling of the heatsink.
This module is based on power MOSFET and will allow PID control of the heated bed (DC-DC Relays usually do not allow this)

Package Includes:
1 x Heated Bed Power Module.
1 x Connection cable for input signal
2 x Power cable

Note:
This module under the premise of normal cooling, it work stable under (Max) = 25A, the process of using the current not exceed 25A.

Product Features

  • APPLICATION: This high power module is a general add-on heated bed power expansion module for 3D printer. It can work with the Anet A8.
  • UNIQUE DESIGN: With unique snowflake heatsink design, it has a great cooling effect. The heat bed power module can be used in both Lerdge motherboard and other 3D printer motherboards.
  • 25A MAXIMUM CURRENT: This high power module helps your 3D printer equipped with the Lerdge controller board become even more powerful. The module can solve the current load problem when the heated bed power is too large. With this add-on module to board lead the maximum current up to 25A.
  • GOOD PROTECTION: When using heated bed 3D printer for 12V power supply which may cause excessive current during times, with this module, it can well protect the connectors on the controller board from burning.
  • PACKAGE INCLUDES: 2 x Heated bed power module (motherboard is not included) and 2 x Connection cable for input signal. BONUS: 4 x Power cables.

Detailed Information available on our Homepage…

Jahyshow 2pcs Cooling Blower Fan DC 12V 0.18A 50mmx15mm Fans for 3d Printer Humidifier Aromatherapy and Other Small Appliances Series Repair Replacement with 1M cable

Features:

Excellent for cooling heatsinks on hot ends, prints, or other cooling needs.
Bearing is high precision, long life and low noise.
Made of high quality PBT, very sturdy and durable.
Voltage: DC 12V, Current: 0.18A.
Speed: 7000 +/-10% RPM, size: 50 x 50 x 15mm.

Specifications:

Voltage: DC 12V
Current: 0.18A
Speed: 7000 +/-10% RPM
Bearing: oil bearing
Noise: 25dB
Wiring: 2PIN, 1 meter
Inlet: 31mm
Outlet: 20mm x 15mm
Size: 50mm x 50mm x 15mm

Package includes:
2x Brushless Cooling Fan with 1M cable

Product Features

  • Cooling Blower Fan 12vdc 0.18A 50mmx15mm Widely used in humidifier, aromatherapy and other small appliances series; small heat radiating communication equipment; military equipment; intelligent industrial control equipment plate cooling heat, high precision medical equipment cooling; pc cpu server cooling dissipation and so on—Repair Replacement
  • Made of high quality PBT, very sturdy and durable.
  • Speed: 7000 +/-10% RPM, size: 50 x 50 x 15mm.Voltage: DC 12V, Current: 0.18A. Noise: 25dB. Wiring: 2PIN, 1 meter,Inlet: 31mm,Outlet: 20mm x 15mm.
  • Brushless Fan,DC Blower Fan,Brushless DC Blower Fan,50x50x15mm Fans
  • worry-free 1 year warranty and friendly customer service

Detailed Information available on our Homepage…

Kalanution 2pcs Cooling Blower Fan DC 12V 0.15A 50mmx15mm Fans for 3d Printer Humidifier Aromatherapy and Other Small Appliances Series Repair Replacement

Cooling Blower Fan 12vdc 0.15A 50mmx15mm Widely used in humidifier, aromatherapy and other small appliances series; small heat radiating communication equipment; military equipment; intelligent industrial control equipment plate cooling heat, high precision medical equipment cooling; pc cpu server cooling dissipation and so on—Repair Replacement (2Pack)
Type: Centrifugal Blower Size : 50 * 50 * 15mm
Bearings: Oil
Voltage : 12V
Current : 0.15A
Scope: humidifiers , heaters, clothes dryers , etc.
Quantity:2Pc
Notice:
This product of our company are non-waterproof product, it is strictly prohibited using in the water. Secondly, product operating voltage is DC12V, prohibit overload use.
Product working environment is below zero 10 Degrees Celsius to 70 Degrees Celsius Fourthly, please do not dismantle the product privately.

Product Features

  • DC 12V 50mm Blower Cooling Fan Hotend Extruder Turbine Fan for 3D Printer
  • Total Size : 5 x 5 x 1.5cm /2″ x 2″ x 0.6 ” (L*D*H); Outlet Size : 2 x1.5cm/0.8″ x 0.6″(L*W) Cable Length : 25cm/9.8″; Mounting Spacing : 5.8cm/2.3″;Weight : 26g
  • Brushless Fan,DC Blower Fan,Brushless DC Blower Fan,50x50x15mm Fans
  • Guaranteed to continuously run 10,000 hours under normal temperature. Speed: 5200 RPM
  • Cooling Blower Fan 12vdc 0.15A 50mmx15mm Widely used in humidifier, aromatherapy and other small appliances series; small heat radiating communication equipment; military equipment; intelligent industrial control equipment plate cooling heat, high precision medical equipment cooling; pc cpu server cooling dissipation and so on—Repair Replacement (2Pack)

Click Here For More Information