SODIAL(R) 1 set CCL Material RAMPS 1.4 Printer Kit for RepRap 3D Drucker

* SODIAL is a registered trademark. ONLY Authorized seller of SODIAL can sell under SODIAL listings.Our products will enhance your experience to unparalleled inspiration.
SODIAL(R) 1 set CCL Material RAMPS 1.4 Printer Kit for RepRap 3D Drucker
Color: As shown
Material: CCL
Package content:
1x RepRap Arduino Mega Pololu Shield (RAMPS) 1.4
1x Mega 2560 Board with ATmega2560 and CH340G USB controller – Arduino compatible
5x A4988 Step motor driver
5x heat sink for A4988
1x 20×4 characters Dot-Matrix LC-Display with Controller
1x RAMPS adapter for the LCD
2x connection cable for the LCD
1x USB cable
1x jumper set
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

Product Features

  • RAMPS stands for RepRap Arduino-compatible MEGA Pololu Shield.
  • It has been designed so that all the electronic components required for your RepRap 3D printer can be combined on this shield.
  • Thus, with this shield, e.g. A control with five stepping motors, three temperature sensors, six limit switches, a heating bed, a fan and an extruder.

Click Here If You Need More Detailed Info…

ALUNAR 50mm x 15mm 12V DC Brushless Blower Cooling Fan for Computer Accessory or DIY Reprap I3 3D Printer Kit Spare Part Nozzle Cooler Anet A6 A8

3D Printer Parts 5015 Cooling Cooler Blower Turbo Fan
DC 12V 0.1A Fan For 50x50x15mm

Description:
Model Number: 5015 Fan
Power supply:12V 0.1A
Used for:3D printer
Size:50*50*15

Package include:
1 x 5015 Fan (50*50*15)mm

Product Features

  • 3D Printer part 12V cooler fan
  • 3D printer spare part 5015 blower cooling fan
  • Cooling fan for the DIY 3D printer kit Anet A6 A8
  • Fan which is used for the nozzle of ALUNAR 3D printer
  • Electrical cooler fan for computer accessory

Visit The Website For More Information…

[Sintron] 1.75mm 3D Printer Drucker Kossel Mini All Metal MK8 Extruder hotend 0.4mm Nozzle for Bowden RepRap Rostock Delta Kossel Mini Prusa i3 (Kossel-Extruder)

Overview

This MK8 extruder is an open source universal suitable for most RepRap and DIY long distance feeding filament 3D Printers.

We have made the NEMA 17 Stepper motor with 4 wires which is specially designed for 3D Printer Controller RAMPS 1.4, so you just need to plug it in, and there you go! no need to buy from others and waste a lot of time trying to figure out how to connect them.

The extruder is almost the most important part for 3D printer, also the most difficult part to calibrate. we have made all metal design to replace plastic parts bowden extruder.

Features

(1) Compatible with ABS and PLA 1.75mm.
(2) NEMA 17 Stepper motor is included in this transaction.

Tips:

While using with PLA filament, please always remember to keep the fan on, otherwise it might get jammed and ruin the hotend. PLA is more easier to get jammed, so it might require some patience to practice.
For ABS, we would also suggest to keep the fan on, as this is also better. also remember to purchase filament from good reputation seller, as the filament is very important!

Specifications
(1) Nozzle : 0.4mm
(2) Voltage : 12V/24V
(3) Motor Model : SL42STH40-1204A
(4) Nozzle Flow Rate : 24cc / h
(5) Thermistor Tpye : NTC 100K 3950
(6) Sports Shaft Speed : 10-100mm

Motor Parameters

(1) Model:SL42STH40-1204A
(2) Step Angle : 1.8°
(3) Rated Voltage : 2.55 V
(4) Rated Current : 1.7 A
(5) Phase Resistance : 1.5Ω
(6) Phase Resistance : 2.3 mH
(7) Number of Lead Wire : 10-100mm

Product Features

  • (1) Compatible with ABS and PLA 1.75mm.
  • (2) NEMA 17 Stepper motor is included in this transaction.
  • (3) We don’t just sell them, we also provide good after-sales service, so welcome to discuss with us, we will try to do technical support as much as we can, please feel free to send us an email, we will also help you to complete the project !

Visit The Website For More Information…

Desktop 3D Printer Kits DIY LMYSTAR Reprap i3 Larger Printing Size 210 x 210 x 225 mm

Upgrade 3D Printer for you to print funny models,toys.Development of intellectual.Have a fun time.

Seller Point:
1.There are some STL files in the SD card.STL files include Xlimit,Zlimit,Zleft,Zright,Extruder part (which holds the fans).When these parts is broken, you can print them by yourself,then you do not need to buy these new parts.Give you more conveinence.
If you can’t find STL files about these parts in SD card,you can contact us to send STL files to you.
2.All the tools for assembly are ready in the package including screwdriver,nipper, spanner etc. A SD card with full installation guide and software is in the package too,except the installation video but we can share.

Excellent Function:
1.Compatible with many 3D filament types, such as ABS, PLA, HIP, PP and Nylon etc.
2.Updated sophisticated mainboard, superior power supply system, 240W, 110V-240V.
3.Smart high resolution nozzle, print stability, enjoy a high visual experience.
4.Hot bed: MK3-220+1.5MM SS “H” Board + NEMA17 Stepper together make a smooth and steady printing platform.
Product Information
Model No.: R2
Extruder Qty: Single
Machine Size: 443x420x498mm
Printer Size: 210*210*225mm
Package Size: 475*295*195mm
Machine Weight:8.0kg
Gross Weight:9.0kg
Filament Colors: White ,Red,Black,Blue,Green ,Yellow etc.(Send in random color)
Filament Diameter:1.75mm
Locate Precision:Z axis: 0.004mm; XY axis: 0.012mm
Printing Precision:0.05-0.3mm
Nozzle diameter:0.4mm
Print Speed:10mm/s-120mm/s
Power Supply:110/220V, 240W
Max Control Temp. Extruder:260 °C
Max Temp. of HotBed:100°C
Recommend Temp.
ABS: Nozzle:235 °C , Hot Bed:100 °C
PLA: Nozzle:200 °C , Hot Bed:50 °C
Printing Format: STL/OBJ/G-code
System Compatibility: Windows XP/Win7/Win 8/Linux/Mac
Language:English
Connecting: SD card/USB

Product Features

  • 1.Wide application for printing 3D toys, teaching equipment, and other technological devices, great for stimulate users’ creativity and inspiration and realize their ideal
  • 2.Easy to install;Big Printing size:210 x 210 x225mm;with 10m free filament
  • 3.Three symmetrical cooling fans.Fast speed to cool, high molding efficiency, so you print a high precision model.
  • 4.Easy to run touch screen control panel.12864 LCD screen, English interface, One button for easy operation, support SD card and off-line printing.
  • 5.Customer Service:Professional technical engineers are always available if you meet any questions during assembling.Please send us e-mail and you would get excellent response.

Click Here If You Need More Detailed Info…

RepRap Champion MK2B PCB HeatBed Heat Bed RepRap 3D Printers pre-wired for 12V SMT LED soldered

MK2B comes with pre-soldered SMT LEDs and wiring. PCB pre-wired for 12V power.

Specifications:

Outer Dimensions: 214mm (8 7/16 in) x 214mm (8 7/16 in)
Dimensions between holes: 209 x 209mm
Laminate FR4 1.6+-0.15mm
2 Layer, 35µm Copper
White Soldermask – Both Side
Black Silkscreen – Both Side
Power Input: 12V/24V DC
Copper Plated Holes
Wiring length: 700mm

Package contents:

1 x MK2B PCB Heated Bed pre-wired for 12V power.

Product Features

  • Popular MK2B 200x200mm dual power heated bed design
  • Compatible with most Prusa i3 variations, Mendel, Mendelmax and plenty of other 3D printers
  • Power rating is 120 Watt under 12V
  • Power wiring is included in the kit, length of wires 0.7 meter

Detailed Information available on our Homepage…