●High Stability:No shaft coupling needed,integrated with stepper motor and lead screw.
●High torque Nemga 17 stepper motor:It provides 1.5A 40Ncm/57.1 oz.in holding torque
●Easy to plug:100mm stepper lead wire with XH2.54 connector,no soldering or peeling works.
●Motor rotor is covered by magnetic filling materials,which will help to refrain from skipping steps and getting stuck.
●Redrex Support:Any quality problems and support ,please feel free to contact Redrex Team directly.
Manufacturer Part Number: RDX3D060
Motor Type: Bipolar Stepper
Number of Phase: 2
Step Angle: 1.8 deg.
Rate Voltage: 3.3V DC
Phase Resistance: 2.2ohms±10%（20℃）
Phase Inductance: 3.8mH±20%(1KHz)
Frame Size: 42 x 42mm
Body Length: 352mm
Lead Screw Lengh:310mm
Number of Leads: 4
Lead Length: 100mm
Item Weight: 500g
1x 310mm T8x8 Lead Screw Stepper Motor
- High Stability:No shaft coupling needed,integrated with stepper motor and lead screw.
- High torque Nemga 17 stepper motor:It provides 1.5A 40Ncm/57.1 oz.in holding torque.
- Easy to plug:100mm stepper lead wire with XH2.54 connector,no soldering or peeling works.
- Motor rotor is covered by magnetic filling materials,which will help to refrain from skipping steps and getting stuck.
- Redrex Support:Any quality problems and support ,please feel free to contact Redrex Team directly.
Click Here If You Need More Detailed Info…
Lead Screw Diameter: 8MM
Screw Length: 350mm
Screw Pitch: 2mm
Material: 304 stainless steel
2 x T8 lead Screw
- Material – 304 stainless steel
- Compatible with Prusa i3 Printer Z Axis
- Lead Screw Diameter – 8mm
- Lead – 8mm
- Lead Screw Length – 350mm
Detailed Information available on our Homepage…
HICTOP CR-10S 3D Printer Filament Monitor Prusa I3 Upgrade Dual Z axis T Screw Rods 300x300x400mm
The difference bettwen CR-10 and CR-10S is CR-10S upgraded with dual Z axies leading screw rod which make printing quality better and more stable.
Another upgrading is CR-10S mainboard with filament monitor function, this function can detect when filament is running out or not.
Printing Size： 300*300*400mm
Layer thickness: 0.05-0.4mm (adjustable)
Nozzle temp: 250 degree
Extruder temperature: PLA: 210
Hot bed temperature: PLA: 50
Printing Speed：Normal: 80mm/s, Max.: 200mm/s
Working condition temp: 10-30℃, Humidity:20-50%
Nozzle: 0.4mm, 0.3mm, 0.2mm
Extruder quantity: 1
Body Structure: Imported V-Slot Aluminum Bearings
Nozzle Diameter：Standard 0.4mm
Printing Method: SD card(off-line), contact to the PC(online)
LCD screen: 3 inch LCD screen with aircraft knob
Power supply: input: 110-240V output: 12V/30a
Hot bed: 4mm aluminum alloy platform, 3mm special tempered glass
Operating Software：CURA、Repetier-Host simplify 3D
Software supporting: PROE, Solid-works, UG, 3d Max, Rhino 3D design software, etc.
Cura language: English
Interface language: English
Format : STL, G-Code
Operating System: Linux, Windows, OSX
High accuracy bearings and quality parts, it makes the printer much more stable and quiet when printing.
Product Size: 490*600*615mm
Package Size: 540*640*310 mm
Net Weight: 11kg
Gross Weight: 15kg
*HICTOP 3D printer DIY kits (including build plate and tempered glass)
*Dual Z axis
*Spare screws and Wrench kits
*Assembly instructions and user manual.
*SD card 1pcs (the user manual is in SD card)
*0.2kg PLA Filament
- UPGRADE: CR-10S updated with dual Z axies leading screw rod which make printing quality better and more stable, with different mainboard and firmware from CR-10.
- RESUME PRINTS: CR-10S has the ability to resume prints even after a power outage or lapse occurs.
- FILAMENT MONITOR: CR-10S mainboard with filament alarming function, this function can detective if filament is running out or not.
- PRINTING SIZE: Prints max size of 300X300X400mm. No longer will you be limited to small models.
- EASY ASSEMBLY: Delivery with three sets, just need about 10 minutes to assemble well.
Click Here For More Information
T8 Lead Screw Dia 8MM Pitch 2mm Lead 8mm Length 500mm with Copper Nut THSL-500-8D 3D printer part
Visit The Website For More Information…
Material: stainless steel
Total Length: 500MM
Shaft: 6.35 x 8mm
Nema 17 Stepper motor:
Motor Length: 40mm
Phase Resistance: 1.5Ohm
Phase Inductance: 2.8mH
Detent Torque: 2.2N.cm
Rotor Inertia: 54g.cm2
Holding Torque: 40N.cm
Step angle: 1.8 deg
Step angle accuracy: + – 5%(full step, not load)
Resistance accuracy: + – 10%
Inductance accuracy: + – 20%
How to install:
1. Pls put screw nut into the Lead screw.
2.Then the 2 Mounted ball bearing separately install at both ends of the Lead screw.
3. According to the size of you need to adjust the distance between the nut and Mounted ball bearing.
4. Put shaft coupling into the Lead screw beside the Mounted ball bearing.
1x Lead screw
2x Mounted ball bearing
1x Shaft coupling
1x Stepper motor
- Package include: 3D printer accessories kit(1xscrew + 1xstepper motor + 2xball supports + 1xshaft coupling).
- Lead Screw: Material: Stainless stell; Diameter: 8mm; Pitch: 2mm; Length: 500mm. Mounted Ball Bearing: Material: Zinc alloy; Bore diameter: 8mm.
- Lead screw mainly used in stepper motor, machine tool, and other equipment. Lead screw without processing, direct connected to bearing.
- Suitable for industrial automation equipment, stepper motor rails; such as 3D printers; engraving machine; XYZ module; slider; lifts etc.
- Large torque, small vibration, high-quality, low noise!
Detailed Information available on our Homepage…