Finland's First 3D Printed Aircraft Engine Part Takes to the Skies in Maiden Flight

Pin It
Email

T25 Sensor Housing – first 3D printed component in GE90 jet engine.

One field that 3D printing technology has definitely made a major impact on over the last several years is aerospace – so much so, in fact, that the FAA is currently working to develop a plan on how to deal with the increased rate at which the industry is adopting 3D printing.

The technology is very useful in manufacturing aircraft, as it can reduce the weight of components, as well as producing parts with reduced complexity that offer consistent quality and repeatable characteristics. These features can lower energy expenditures and cost, while also increasing aircraft performance, in the aerospace and defense industry, and a wide variety of aircraft, from drones to jets and rockets, now use 3D printed parts.

Many of these aircraft feature 3D printed engine parts, which can help reduce the total number of pieces that make up the component…which, again, helps with weight reduction. By using 3D printing technology to make the parts for an aircraft engine, companies can also see other benefits as well, including an increase in power and a decrease in fuel burn.

Patria, headquartered in Finland, provides security, defense, and aviation life cycle support services, as well as technology solutions. The company, which is jointly owned by the Norwegian Kongsberg Defence & Aerospace AS and the Finnish state, operates all over the world, with offices and projects in the US, the UAE, Sweden, South Africa, Poland, Norway, Estonia, and Croatia. It is Finland’s primary source for the maintenance, repair, and over-haul (MRO) of military aircraft engines.

[Image: Patria]

The company’s Aviation and Aerostructures business units have over 90 years of experience in the industry, offering assembly, flight training, maintenance and modifications of aircraft and helicopters, and parts manufacturing. In addition, the units offer life-cycle support services for aircraft and helicopters, which covers engine, equipment, and fuselage repair, along with training and maintenance.

Patria has long been involved in using modern manufacturing methods to fabricate and repair different parts and components for aircraft, and has spent more than two years working on the manufacturing process for a new 3D printed part. That hard work has finally paid off, as the country’s first 3D printed aircraft engine part, installed in the F/A-18 Hornet strike-fighter, recently went on its successful maiden flight.

“For this part, the development work has been done over the last two years, with the aim of exploring the manufacturing process for 3D-printable parts, from drawing board to practical application,” said Ville Ahonen, the Vice President of Patria’s Aviation business unit. “Using 3D printing to make parts enables a faster process from customer need to finished product, as well as the creation of newer, better structures. We will continue research on additive manufacturing methods, with the aim of making the new technology more efficient.”

F/A-18 Hornet [Image: US Navy]

The 3D printed aircraft engine part was fabricated using the Inconel 625 superalloy, which is nickel-based and has been used before to manufacture turbine blades. The company was granted approval from the Military Design Organization Approval (MDOA) and the Finnish Military Aviation Authority (FMAA), in accordance with European Military Aviation Requirements (EMARs), to 3D print the part, which was designed in accordance with the MDOA approval.

Discuss this and other 3D printing topics at 3DPrintBoard.com or share your thoughts in the Facebook comments below.

[Source: Patria]

'Imiloa Maunakea Skies May Talk on 3D Printing

Luke McKay. Photo courtesy of 'Imiloa Astronomy Center.

Luke McKay. Photo courtesy of ‘Imiloa Astronomy Center.

‘Imiloa Astronomy Center’s May Maunakea Skies talk will be held on Friday, May 20 featuring Luke McKay from the Institute for Astronomy.

The 7 p.m. talk will discuss the technological development of 3D printing, which is one of the new technologies making life easier for designers and engineers.

McKay of IfA will show time-lapse videos and present a live demonstration of 3D printing. He will also how the audience in a hands-on comparison items printed in plastic versus those with other computer-aided machining.

During the Talk, McKay will discuss how the UH 2.2m (“88 inch”) telescope and the University of Hawai’i Institute for Astronomy are beginning to implement the use of 3D printing. He will also demonstrate the ongoing efforts to upgrade the 2.2m telescope on Mauna Kea, along with some science results the telescope has helped to produce.

‘Imiloa’s monthly Maunakea Skies program includes observational highlights of the current night sky over Hawai‘i, hosted by Planetarium Technician Emily Peavy.

ADVERTISEMENT

The audience will view prominent constellations and stars visible during this time of year.

Maunakea Skies planetarium presentations are held on the third Friday of each month.

Tickets are $10 for general admission, $8 for members (member level discounts apply). They can be pre-purchased at ‘Imiloa’s front desk or by calling 932-8901.