It can be used again and again.
Separation type bending to take the model, convenient to use.
Can be installed on a hot bed and a glass platform.
Print not warped edge, no glue is needed.
This product consists of A plate + B plate sticker.
The A plate is flexible and magnetic, it is easy to move away from build platform and take away printed models.
The B plate has magnetic upper side and sticky back.
Type: Print Build Plate Tape
Material: Magnetic Print Bed Tape
Features: Magnetic, Easy to Use, 3D Printer Accessories
Size: 20cm x 20cm/7.87″ x 7.87″ (Approx.)
Due to the light and screen setting difference, the item’s color may be slightly different from the pictures.
Please allow slight dimension difference due to different manual measurement.
1 Set of Print Build Plate Tape(A Plate + B Plate Sticker)
- It can be used again and again.
- Separation type bending to take the model, convenient to use.
- Can be installed on a hot bed and a glass platform.
- This product consists of A plate + B plate sticker.
- The A plate is flexible and magnetic, it is easy to move away from build platform and take away printed models.
Visit The Website For More Information…
1piece A + 1piece B sticker
Advantage： 1. use again and again. More money. 2. separation type bending to take the model. It’s more convenient. 3. do not need the beauty of paper and scraper to assist the model. 4. can be installed on a hot bed and a glass platform. 5. print not warped edge. No glue is needed. 6. can be printed on cold bed 7.The A plate is flexible, frosted and magnetic, it is easy to move away from build platform and take away printed models 8. The A B plates are flatness 9.It can print a variety of materials such as PLA and so on.
- Backing: B with 3M backing
- Size: 220mm x220mm
- Please level the build plate well before printing
- Please do not let heated nozzle touch the A plate directly !
- Because of the material of the product, it is recommended that the temperature of the hot bed should not exceed 80 degrees.
Click Here For More Information
Type: Heat Crepe Sticker Tape
Suitability: For 3D Printer Hot Bed
Long-Term Temperature Resistance: 260 °C
Short-Term Temperature Resistance: 300°C
Size: Approx. 50mm x 15m / 2.0in x 49ft
Package Size: Approx. 100 x 100 x 60mm / 3.9 x 3.9 x 2.4in
Package Weight: 95.4g
1 x Sticker Tape
- Adhesive sticker tape crepe paper, 50mm x 15m, suitable for electric tasks, 3D printer hot bed, BGA heating, soldering tasks, and more
- Stands out in high temperature resistance, effectively increases the adhesion between the printed material and the heating plate, and reducing the deformation during printing
- High strength sticker tape is easy to tear, and ensures strong adhesive strength and fixed ability
- Slim and soft, made of environmental material, safe and harmless
- High adhesive strength and heat resistance for perfect printing effect. Ease your printing time
Visit The Website For More Information…
* TOOGOO is a registered trademark. ONLY Authorized seller of TOOGOO can sell under TOOGOO listings.Our products will enhance your experience to unparalleled inspiration.
TOOGOO(R) 3D Printer Heat Hot Bed Sticker Coordinate Printed 220x220mm Hot Bed Surface Sticker Black for 3D Printer Parts
220x220mm 3D Printer Hot Bed Surface Sticker Accessory with 1: 1 Coordinate
Type: 3D printer hot bed platform sticker
Size: approx. 220 X 220 X 1 mm/8.66 X 8.66 X 0.04 inch
1 x Hot Bed Coordinate Printed sticker
Note: Please check the size and fix carefully before applying the sticker.
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
- Suitable for PLA, ABS, HIPS, PETG, TPE filament, nylon, PC, RETT material.
- Provides extra adhesive force between filament and heating board.
- Effectively prevents deformation of ABS, PLA filament.
- Compatible with ABS, PLA, HIPS and other type long filament.
- Simple design, fast installation. Easy to use and apply. Dull polish treated surface, reusable 3D printer accessory.
Detailed Information available on our Homepage…
Size:510mm x 510mm (20″x20″)
Background is made of 3M adhesive , easily stick on the heat bed platform
HOW TO USE:
There are 2 methods to attaching the build surface on heatbed:
1. clamp the build surface to the print bed using binder clips（at least 3 clips)
2. Torn off 3M tape on back and stick it on heatbed.
- Size:510mm x 510mm (20″x20″)
- Build sheet adheres to a print bed to help the filament stick during printing, while also enabling clean removal of the printed part afterward
- Compatible with ABS, PLA, HIPS and other filament
- Single sheet design installs more quickly and with fewer bubbles than tape or films
- Durable construction allows for multiple uses with either the same or different filament material
Check Out Our Website For Details…