CCTREE 3D Printer Build Surface with 3M Sticker 3D Printer heated bed Sheet for Creality CR-10 CR-10S 300x300mm (Pack of 3)

Size:310mm x 310mm (12.2″x12.2″)
Color:Blue
Background is made of 3M adhesive , easily stick on the heat bed platform

HOW TO USE:

There are 2 methods to attaching the build surface on heatbed:

1. clamp the build surface to the print bed using binder clips(at least 3 clips)

2. Torn off 3M tape on back and stick it on heatbed.

Product Features

  • Size:310mm x 310mm (12.2″x12.2″)
  • Build sheet adheres to a print bed to help the filament stick during printing, while also enabling clean removal of the printed part afterward
  • Compatible with ABS, PLA, HIPS and other filament
  • Single sheet design installs more quickly and with fewer bubbles than tape or films
  • Durable construction allows for multiple uses with either the same or different filament material

Visit The Website For More Information…

New Matter MOD-t 3D Printer Entry Bundle – Includes 3 Spools of Filament and a 3-Pack of Print Surface Plates

The New Matter MOD-t is the most elegantly simple desktop 3D printer, providing the highest quality and reliability for use at home and in the classroom. With levels of quiet operation, safety, and customer support that are unmatched by any other desktop 3D printer, the MOD-t is the perfect fit for consumers, professionals, and students alike.

Product Features

  • Elegantly Simple – Easy setup allows you to begin 3D printing within 20 minutes
  • WiFi Enabled – Print wirelessly from your computer, tablet, or smartphone
  • High Quality Reliability – Expect a higher print success rate and resolutions as fine as 50 microns
  • Eco-Friendly PLA – Print with high quality, eco-friendly PLA filament in an array of vibrant colors
  • Unlimited Support – Experience unlimited phone, email, and chat support for the life of your MOD-t

Click Here For More Information

Gizmo Dorks PEI Sheet 8″ x 8″ 1 mm 3D Printer Build Surface with 3M 468MP Adhesive Tape

PEI (Polyetherimide) sheets provide a 3D printing build surface that requires no tape, slurry, or adhesive. ABS and PLA both stick extremely well to the surface, which eliminates the need for support rafts used for better adhesion. The printed 3D parts will adhere to the PEI surface on a heated bed, and it will release or pop off when cooling down.

How to Use:

Cut the PEI sheet to size by scoring with a hobby knife. Remove the blue protective film from the PEI sheet. Carefully apply the 3M 468MP Transfer Tape and use it to stick the PEI to the print bed. Both a sheet and strips of adhesive are included in each package.

Once the PEI sheet is attached, re-level your print bed and you are ready to go!

It helps to wipe the surface down with isopropyl alcohol, methyl alcohol, or soap in between prints. This will ensure the PEI is clean, and help adhesion. Light sanding with 2400 grit paper will also give the PEI sheet more life.

Product Features

  • MADE IN THE USA: Single 1mm thick sheet installs quickly on top of existing flat build platforms (e.g. borosilicate glass) using the 3M 468MP adhesive transfer tape.
  • ABS and PLA filaments (along with many other materials) print directly on to PEI surface without the need for additional adhesives, tapes, or slurry.
  • REMOVE FILM FROM BOTH SIDES BEFORE USING: Blue protective film guards against scratches during shipping and handling.
  • Reuse for multiple prints, just wipe down with isopropyl alcohol between prints for best results
  • Includes: 1x PEI Sheet, 1x 3M 468MP Transfer Tape Sheet, 5x 1″ Strips 3M 468MP Transfer Tape

Detailed Information available on our Homepage…

Gizmo Dorks PEI Sheet 10″ x 10″ 1 mm 3D Printer Build Surface Ultem 1000

PEI (Polyetherimide) sheets provide a 3D printing build surface that requires no tape, slurry, or adhesive. ABS and PLA both stick extremely well to the surface, which eliminates the need for support rafts used for better adhesion.

How to Use:

Cut the PEI sheet to size by scoring with a hobby knife. There are two methods to attaching the PEI to your print bed. The first method is to just clamp the sheet to the print bed using binder clips. We find that 2 on each side works great.The second method, get 3M 468MP Transfer Tape and use it to stick the PEI to the print bed.

Once the PEI sheet is attached, re-level your print bed and you are ready to go!

It helps to wipe the surface down with isopropyl alcohol, methyl alcohol, or soap in between prints. This will ensure the PEI is clean, and help adhesion. Light sanding with 5000 grit paper will also give the PEI sheet more life.

Product Features

  • MADE IN THE USA: Single 1mm thick sheet installs quickly on top of existing flat build platforms (e.g. borosilicate glass)
  • ABS and PLA filaments (along with many other materials) print directly on to PEI surface without the need for additional adhesives, tapes, or slurry.
  • REMOVE FILM FROM BOTH SIDES BEFORE USING: Blue protective film guards against scratches during shipping and handling.
  • Reuse for multiple prints, just wipe down with isopropyl alcohol between prints for best results
  • Sheet can be easily cut down to desired size by scoring with a utility knife

Detailed Information available on our Homepage…

3 PCS x 3D Printer Build Surface Heated Bed Cover Sticky Pad 220x220mm

Perfect solution for 3d Printer build surface. 3 x pads included in this listing.

Specifications:

Works with any filament – ABS, PLA, HIPS, PET+, Brick, Wood & Flexible (TPE) filaments.
Very easily installed without air bubbles.
Protects build plate from scratches.
Durable and long lasting material.
Holds your 3D printed objects well, but they can be removed with not much effort after print is finsihed.

Package contents:

3 x 3D Printer Build Surface pads.

Product Features

  • Durable and long lasting
  • You can print with any material on these pads
  • Good adhesion for printed parts
  • Compatible with most popular 3D printers on market – Wanhao Di3, Anet A8 etc

Visit The Website For More Information…